Dodge Durango Service Bulletins
764 manufacturer communications on file.
- November 1, 2022•Document ID: 10243093Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- NotificationZB0
- Date Added:
- October 2, 2023
- Manufacturer:
- DODGE
SummaryDealers should attempt to minimize customer inconvenience by placing the owner in a loaner vehicle if inspection determines that repair is required and the vehicle must be held overnight.
Associated Products (1)Associated Documents - October 21, 2022•Document ID: 10227686Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT; WHEELS
- Mfr Comm. #:
- 9100095
- Date Added:
- December 12, 2022
- Manufacturer:
- DODGE
SummaryAlternator Assy Prior to alternator removal: 1. Inspect & check all electrical connections to the alternator a. 2-way connector containing field control circuit & alternator sense voltage circuit. b. Unplug & plug-in the 2-way connector for field & sense circuit. Verify the connection is tight & check for any bent pins in alternator connector or damage to female terminals in connector. c. Check Alternator B+ Stud connection to be sure nut is securing positive cable terminal properly (i.e. nut is clamping terminal & connection is tight). d. Check fuse between the alternator B+ stud & PDC terminal to make sure it is not blown. e. Be sure to follow service manual sections on ALTERNATOR CONTROL CIRCUIT DIAGNOSTIC & ALTERNATOR SENSE CIRCUIT DIAGNOSTIC looking for any opens & shorts (to ground or battery voltage). 2. Check/verify all grounds in the charging circuit a. Check tightness of mounting bolts securing alternator to engine block. Alternator is a case ground component. b. Check main ground from engine to chassis; connection must be tight. c. Check battery ground cable connections are tight. d. Potentially, loosen alternator mounting bolts, without removing alternator, and re-tighten to torque specifications in service manual. e. After all steps above are complete, re-start engine & check charging system operation. 3. Verify that the Smart Charging System is not the reason for alternator low voltage & current output (Amps). a. Alternator charging can be suspended during engine idle operation because of the Smart Charge strategy. b. Refer to service manual section "System Operation - Smart Charging System". c. Refer to Star Case S2008000031 Rev A for low charging voltage & Smart Charge Mode Voltage Range diagram & mode descriptions. d. The alternator has no internal regulator; thus, has no smart circuitry. All alternator control signals come from ECM. 4. If alternator is faulty, remove alternator & mounting bolts. Return alternator with bolts to QEC for analysis.
Associated Products (4)Associated Documents - October 19, 2022•Document ID: 10227749Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 0819322
- Date Added:
- December 12, 2022
- Manufacturer:
- DODGE
SummaryVehicle System Interface Module (VSIM) Jumper Harnesses Missing This bulletin involves adding three missing VSIM wiring jumper harnesses into rear cargo area. Vehicles missing all three jumper harnesses from the trunk kit to use when installing policeequipment (lights, sirens, etc.) to the VSIM.This service bulletin only pertains to Model WDEE75 Dodge Durango Pursuit Vehicle - All Wheel Drive (AWD).
Associated Products (1)Associated Documents - October 18, 2022•Document ID: 10227748Service Bulletin/Repair InstructionsVISIBILITY:SUN/MOON ROOF ASSEMBLY
- Mfr Comm. #:
- 2304222
- Date Added:
- December 12, 2022
- Manufacturer:
- DODGE
SummarySunroof Misaligned This bulletin involves inspecting the sunroof glass to roof flushness and if needed, adjustingthe sunroof glass. Customers may comment on the following: Sunroof misaligned, causing a water leak into the vehicle.
Associated Products (1)Associated Documents - October 13, 2022•Document ID: 10227712Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- S2208000138RevA
- Date Added:
- December 12, 2022
- Manufacturer:
- DODGE
SummaryDecreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
Associated Products (18)2023 Jeep Wrangler2022 Chrysler 3002022 Chrysler Pacifica2022 Chrysler Voyager2022 Dodge Challenger2022 Dodge Durango2022 Jeep Compass2022 Jeep Wrangler2022 Ram 15002021 Chrysler 3002021 Chrysler Pacifica2021 Chrysler Voyager2021 Dodge Challenger2021 Dodge Durango2021 Jeep Compass2021 Jeep Grand Cherokee2021 Jeep Wrangler2021 Ram 1500Associated Documents - October 11, 2022•Document ID: 10227706Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HATCHBACK/LIFTGATE
- Mfr Comm. #:
- S2223000073
- Date Added:
- December 12, 2022
- Manufacturer:
- DODGE
SummaryPower Liftgate Inoperative Or Intermittent Operation
Associated Products (2)Associated Documents - October 4, 2022•Document ID: 10227701Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; PARKING BRAKE
- Mfr Comm. #:
- S2208000169
- Date Added:
- December 12, 2022
- Manufacturer:
- DODGE
SummaryRFH Has Stored B1A7D-01 Start Button ? General Electrical Failure
Associated Products (2)Associated Documents - September 28, 2022•Document ID: 10226007Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE; COMMUNICATION:MANUFACTURER TELEMATICS
- Mfr Comm. #:
- S228A000003
- Date Added:
- November 7, 2022
- Manufacturer:
- JEEP
SummaryUconnect Box Error Message On Radio Screen And Diagnostic Trouble Code (DTC) code B22A9-96 Set
Associated Products (15)Associated Documents - September 28, 2022•Document ID: 10225953Service Bulletin/Repair InstructionsWHEELS; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; POWER TRAIN; EQUIPMENT; ELECTRICAL SYSTEM:STARTER ASSEMBLY:SOLENOID
- Mfr Comm. #:
- 9100082
- Date Added:
- November 7, 2022
- Manufacturer:
- DODGE
SummarySTARTER, Engine Prior to starter removal: 1. Inspect and check all connections to the starter motor solenoid a. Unplug and plug-in the T50 1-way connector as needed to verify the connection is good & tight and check for any bent pin in the connection. b. Inspect the T30 connection (i.e. B+ M8 threaded stud & nut) for tightness to assure cable ring terminal connection is secured and tight (use torque spec per service manual). 2. Check/verify all grounds in the cranking circuit a. Check tightness of mounting bolts that secure starter to the engine block b. Check main ground from engine to chassis c. Check battery ground cable connections are clean and tight d.Potentially, loosen both starter motor bolts, without removing, and re-tighten to torque specifications in the service manual e. After all steps above are complete, attempt to crank the engine to verify if improvement has been made (i.e. the steps fixed the customer complaint) 3. Conduct the voltage drop test (starter feed circuit) per the service manual before removing the starter motor 4. Starter Removal: conduct the removal if above steps do not fix the complaint a. Conduct bench test by applying 12 volts to motor T30 and T50 connections (i.e. conduct simple free speed test) b. Free speed test should result in starter motor pinion travel to pinion stop and rotation with normal rotational noise (i.e. no grinding, scrapping, etc.) c. If any abnormal noise is present, replace the starter motor 5. During starter removal, also remove and replace the two starter mounting bolts. Return the bolts with starter motor for analysis at QEC and the supplier warranty analysis lab.
Associated Products (4)Associated Documents - September 3, 2022•Document ID: 10225980Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; UNKNOWN OR OTHER
- Mfr Comm. #:
- S228A000025
- Date Added:
- November 7, 2022
- Manufacturer:
- JEEP
SummaryHarman R1H Uconnect 5 Radio Software Flash Error Codes
Associated Products (10)Associated Documents - September 3, 2022•Document ID: 10225977Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- S228A000024
- Date Added:
- November 7, 2022
- Manufacturer:
- JEEP
SummaryRadio Sirius XM Mutes After Ending Phone Call
Associated Products (9)Associated Documents - August 30, 2022•Document ID: 10225369Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- S2223000063
- Date Added:
- October 31, 2022
- Manufacturer:
- RAM
SummaryAmbient Temperature Sensor Servicing.
Associated Products (26)2023 Jeep Gladiator2023 Jeep Grand Cherokee2023 Jeep Wrangler2022 Chrysler 3002022 Dodge Challenger2022 Dodge Charger2022 Dodge Durango2022 Jeep Gladiator2022 Jeep Wrangler2022 Ram 15002022 Ram 25002022 Ram 35002022 Ram 45002022 Ram 55002021 Chrysler 3002021 Dodge Challenger2021 Dodge Charger2021 Dodge Durango2021 Jeep Gladiator2021 Jeep Grand Cherokee+ 6 moreAssociated Documents - August 30, 2022•Document ID: 10225232Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- S2223000063
- Date Added:
- October 31, 2022
- Manufacturer:
- RAM
SummaryAmbient Temperature Sensor Servicing.
Associated Products (26)2023 Jeep Gladiator2023 Jeep Grand Cherokee2023 Jeep Wrangler2022 Chrysler 3002022 Dodge Challenger2022 Dodge Charger2022 Dodge Durango2022 Jeep Gladiator2022 Jeep Wrangler2022 Ram 15002022 Ram 25002022 Ram 35002022 Ram 45002022 Ram 55002021 Chrysler 3002021 Dodge Challenger2021 Dodge Charger2021 Dodge Durango2021 Jeep Gladiator2021 Jeep Grand Cherokee+ 6 moreAssociated Documents - August 29, 2022•Document ID: 10229513Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- S2221000003
- Date Added:
- January 9, 2023
- Manufacturer:
- DODGE
Summary8-Speed Transmission, Additional Transmission Fluid Leak Inspection/Repair Guidelines.
Associated Products (18)2023 Jeep Gladiator2023 Jeep Grand Cherokee2023 Jeep Wrangler2022 Chrysler 3002022 Dodge Challenger2022 Dodge Charger2022 Dodge Durango2022 Jeep Gladiator2022 Jeep Wrangler2022 Ram 15002021 Chrysler 3002021 Dodge Challenger2021 Dodge Charger2021 Dodge Durango2021 Jeep Gladiator2021 Jeep Grand Cherokee2021 Jeep Wrangler2021 Ram 1500Associated Documents - August 19, 2022•Document ID: 10229572Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 3100122
- Date Added:
- January 9, 2023
- Manufacturer:
- JEEP
SummaryApproved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Associated Products (40)2022 Alfa Romeo Stelvio2022 Chrysler 3002022 Chrysler Pacifica2022 Chrysler Voyager2022 Dodge Challenger2022 Dodge Charger2022 Dodge Durango2022 Dodge Journey2022 Jeep Cherokee2022 Jeep Compass2022 Jeep Gladiator2022 Jeep Grand Wagoneer2022 Jeep Renegade2022 Jeep Wagoneer2022 Jeep Wrangler2022 Ram 15002022 Ram 25002022 Ram 35002022 Ram 45002022 Ram 5500+ 20 moreAssociated Documents - August 19, 2022•Document ID: 10225424Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 3100122
- Date Added:
- October 31, 2022
- Manufacturer:
- CHRYSLER
SummaryApproved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Associated Products (40)2022 Alfa Romeo Stelvio2022 Chrysler 3002022 Chrysler Pacifica2022 Chrysler Voyager2022 Dodge Challenger2022 Dodge Charger2022 Dodge Durango2022 Dodge Journey2022 Jeep Cherokee2022 Jeep Compass2022 Jeep Gladiator2022 Jeep Grand Wagoneer2022 Jeep Renegade2022 Jeep Wagoneer2022 Jeep Wrangler2022 Ram 15002022 Ram 25002022 Ram 35002022 Ram 45002022 Ram 5500+ 20 moreAssociated Documents - August 19, 2022•Document ID: 10225287Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; STRUCTURE; STRUCTURE:INTERIOR PANELS:DOOR
- Mfr Comm. #:
- 3100122
- Date Added:
- October 31, 2022
- Manufacturer:
- RAM
SummaryApproved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Associated Products (50)2023 Alfa Romeo Stelvio2023 Dodge Challenger2023 Jeep Gladiator2023 Jeep Grand Cherokee2023 Jeep Wrangler2023 Ram 15002023 Ram 25002023 Ram 35002023 Ram 45002023 Ram 55002022 Alfa Romeo Stelvio2022 Chrysler 3002022 Chrysler Pacifica2022 Chrysler Voyager2022 Dodge Challenger2022 Dodge Charger2022 Dodge Durango2022 Dodge Journey2022 Jeep Cherokee2022 Jeep Compass+ 30 moreAssociated Documents - August 18, 2022•Document ID: 10229568Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 1813622
- Date Added:
- January 9, 2023
- Manufacturer:
- DODGE
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. The customer may comment on the following conditions: Rough idle, hesistation and/or stumble felt during cold engine driving. Clunk or bump felt during transmission shift while A/C is running. RPM bounces during full throttle, high speed and heavy acceleration.
Associated Products (1)Associated Documents - August 18, 2022•Document ID: 10225420Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 1813622
- Date Added:
- October 31, 2022
- Manufacturer:
- DODGE
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. The customer may comment on the following conditions: Rough idle, hesistation and/or stumble felt during cold engine driving. Clunk or bump felt during transmission shift while A/C is running. RPM bounces during full throttle, high speed and heavy acceleration.
Associated Products (1)Associated Documents - August 18, 2022•Document ID: 10225283Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 1813622
- Date Added:
- October 31, 2022
- Manufacturer:
- DODGE
SummaryFlash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. The customer may comment on the following conditions: Rough idle, hesistation and/or stumble felt during cold engine driving. Clunk or bump felt during transmission shift while A/C is running. RPM bounces during full throttle, high speed and heavy acceleration.
Associated Products (1)Associated Documents