2025 Audi A5/Q5/S5/SQ5 06GK KD2 Software Update TSB

Why This Matters

Audi has issued Technical Service Bulletin (TSB) 06GK UPDATE as a proactive measure to enhance customer satisfaction. This initiative, known as the "Proactive Pre-delivery PPE/PPC Quality Initiative," involves applying a specific KD2 software update to new vehicles before they are delivered to customers. The goal is to prevent certain conditions from occurring, ensuring a better ownership experience from the start.

What's Being Updated

This TSB addresses the application of the KD2 software update package. The update is designed to prevent potential issues and is part of Audi's quality control process for new vehicles. The specific software version referenced for this update is 03.10.00/C (28.13.01) KD2.

How to Check if Your Vehicle is Affected

This proactive update specifically targets new vehicles in dealer inventory. To determine if a vehicle is eligible for the 06GK UPDATE, technicians must check the ELSA Campaign/Action Information screen. The vehicle must show the 06GK code as "open" on the day of repair. This procedure is valid only for vehicles that are in "DEALER NEW CAR INVENTORY" and are still within the New Vehicle Limited Warranty period.

Important Warnings for Owners

• This update is for new, unsold vehicles only. The procedure must be performed on applicable vehicles in dealer inventory prior to sale. If you have already taken delivery of your vehicle, it's unlikely to be covered by this specific pre-delivery initiative. However, you should always consult an authorized Audi dealer for any concerns.
• Do not claim wash/loaner under this action. This TSB specifies that costs for vehicle washing or loaner vehicles are not to be claimed under this particular service action.

Repair Procedure Summary

The primary repair involves updating the vehicle's software. For detailed software update instructions, US dealers are directed to reference Technical Service Bulletin 2079690 titled "00 Combined software update 03.10.00/C (28.13.01) KD2." Canadian dealers should refer to Technical Service Bulletin 2078923 with the same title. In cases where software flashing is aborted, US dealers should consult TPI 2079692, and Canadian dealers should refer to TPI 2079312 for guidance.

Required Tools or Parts

Performing the Audi KD2 software update requires specific diagnostic equipment to ensure the process is completed correctly and safely. Technicians will need:

• Battery Tester/Charger: A -VAS5908- unit or an equivalent charger capable of providing at least 90A.
• Diagnostic Tester: A -VAS6150X/VAS6160X- unit or an equivalent diagnostic tool.

Warranty Information

Warranty claims for the 06GK UPDATE should use Service Number 06GK, Damage Code 0099, and Parts Vendor Code 002. Different Claim Types apply for sold versus unsold vehicles. Labor operations and time units are specified:

• Labor Op 0151 00 10: 20 time units for the software update, including setup and battery charger connection.
• Labor Op 0151 00 40: 130 time units for a fixed-rate software update, covering all preliminary and follow-up work, bus sleep cycle, calibration drive, and restarting the software update if flashing is aborted.
• Labor Op 0150 99 99: An additional 50 time units are possible per flash cancellation attempt, for each documented attempt.

Additional Information

Always check the ELSA system for the most current version of this document and any related information, as parts and service references are subject to change.

---

Source: NHTSA ID: 11027385