Toyota MR2 Service Bulletins

136 manufacturer communications on file.

• January 7, 2026•Document ID: 11028712

  Service Bulletin/Repair Instructions
  UNKNOWN OR OTHER

  Mfr Comm. #:

  T-SB-0055-24 Rev2

  Date Added:

  February 11, 2026

  Manufacturer:

  TOYOTA

  Summary

  Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

  Associated Products (376)

  2026 Toyota 4Runner2026 Toyota bZ2026 Toyota Camry2026 Toyota Corolla2026 Toyota Corolla Cross2026 Toyota Crown2026 Toyota Crown Signia2026 Toyota Grand Highlander2026 Toyota GR Corolla2026 Toyota Highlander2026 Toyota Land Cruiser2026 Toyota Mirai2026 Toyota Prius2026 Toyota RAV42026 Toyota Sequoia2026 Toyota Sienna2026 Toyota Supra2026 Toyota Tacoma2026 Toyota Tundra2026 Toyota Yaris+ 356 more
  Associated Documents

  • DownloadMC-11028712-0001.pdf↗
• December 6, 2024•Document ID: 11012744

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0039-24 Rev2

  Date Added:

  January 9, 2025

  Manufacturer:

  TOYOTA

  Summary

  The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

  Associated Products (450)

  2025 Toyota 4Runner2025 Toyota bZ4X2025 Toyota Camry2025 Toyota Corolla2025 Toyota Corolla Cross2025 Toyota Crown2025 Toyota Crown Signia2025 Toyota Grand Highlander2025 Toyota GR Corolla2025 Toyota Highlander2025 Toyota Land Cruiser2025 Toyota Mirai2025 Toyota Prius2025 Toyota RAV42025 Toyota Sequoia2025 Toyota Sienna2025 Toyota Supra2025 Toyota Tacoma2025 Toyota Tundra2025 Toyota Venza+ 430 more
  Associated Documents

  • DownloadMC-11012744-0001.pdf↗
• December 6, 2024•Document ID: 11012743

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0038-24 Rev2

  Date Added:

  January 9, 2025

  Manufacturer:

  TOYOTA

  Summary

  To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

  Associated Products (450)

  2025 Toyota 4Runner2025 Toyota bZ4X2025 Toyota Camry2025 Toyota Corolla2025 Toyota Corolla Cross2025 Toyota Crown2025 Toyota Crown Signia2025 Toyota Grand Highlander2025 Toyota GR Corolla2025 Toyota Highlander2025 Toyota Land Cruiser2025 Toyota Mirai2025 Toyota Prius2025 Toyota RAV42025 Toyota Sequoia2025 Toyota Sienna2025 Toyota Supra2025 Toyota Tacoma2025 Toyota Tundra2025 Toyota Venza+ 430 more
  Associated Documents

  • DownloadMC-11012743-0001.pdf↗
• December 6, 2024•Document ID: 11012742

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0035-24 Rev2

  Date Added:

  January 9, 2025

  Manufacturer:

  TOYOTA

  Summary

  Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

  Associated Products (450)

  2025 Toyota 4Runner2025 Toyota bZ4X2025 Toyota Camry2025 Toyota Corolla2025 Toyota Corolla Cross2025 Toyota Crown2025 Toyota Crown Signia2025 Toyota Grand Highlander2025 Toyota GR Corolla2025 Toyota Highlander2025 Toyota Land Cruiser2025 Toyota Mirai2025 Toyota Prius2025 Toyota RAV42025 Toyota Sequoia2025 Toyota Sienna2025 Toyota Supra2025 Toyota Tacoma2025 Toyota Tundra2025 Toyota Venza+ 430 more
  Associated Documents

  • DownloadMC-11012742-0001.pdf↗
• December 5, 2024•Document ID: 11012735

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0061-23 Rev2

  Date Added:

  January 9, 2025

  Manufacturer:

  TOYOTA

  Summary

  Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.

  Associated Products (450)

  2025 Toyota 4Runner2025 Toyota bZ4X2025 Toyota Camry2025 Toyota Corolla2025 Toyota Corolla Cross2025 Toyota Crown2025 Toyota Crown Signia2025 Toyota Grand Highlander2025 Toyota GR Corolla2025 Toyota Highlander2025 Toyota Land Cruiser2025 Toyota Mirai2025 Toyota Prius2025 Toyota RAV42025 Toyota Sequoia2025 Toyota Sienna2025 Toyota Supra2025 Toyota Tacoma2025 Toyota Tundra2025 Toyota Venza+ 430 more
  Associated Documents

  • DownloadMC-11012735-0001.pdf↗
• December 3, 2024•Document ID: 11012727

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0062-23 Rev2

  Date Added:

  January 9, 2025

  Manufacturer:

  TOYOTA

  Summary

  Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.

  Associated Products (423)

  2025 Toyota 4Runner2025 Toyota bZ4X2025 Toyota Camry2025 Toyota Corolla2025 Toyota Corolla Cross2025 Toyota Crown2025 Toyota Crown Signia2025 Toyota Grand Highlander2025 Toyota GR Corolla2025 Toyota Highlander2025 Toyota Land Cruiser2025 Toyota Mirai2025 Toyota Prius2025 Toyota RAV42025 Toyota Sequoia2025 Toyota Sienna2025 Toyota Supra2025 Toyota Tacoma2025 Toyota Tundra2025 Toyota Venza+ 403 more
  Associated Documents

  • DownloadMC-11012727-0001.pdf↗
• July 29, 2024•Document ID: 11007455

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0055-24 Rev1

  Date Added:

  September 7, 2024

  Manufacturer:

  TOYOTA

  Summary

  Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

  Associated Products (345)

  2024 Toyota 4Runner2024 Toyota bZ4X2024 Toyota Camry2024 Toyota Corolla2024 Toyota Corolla Cross2024 Toyota Crown2024 Toyota Grand Highlander2024 Toyota GR Corolla2024 Toyota Highlander2024 Toyota Mirai2024 Toyota Prius2024 Toyota RAV42024 Toyota Sequoia2024 Toyota Sienna2024 Toyota Supra2024 Toyota Tacoma2024 Toyota Tundra2024 Toyota Venza2023 Toyota 4Runner2023 Toyota bZ4X+ 325 more
  Associated Documents

  • DownloadMC-11007455-0001.pdf↗
• July 29, 2024•Document ID: 11006161

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0055-24 Rev1

  Date Added:

  August 8, 2024

  Manufacturer:

  TOYOTA

  Summary

  Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

  Associated Products (345)

  2024 Toyota 4Runner2024 Toyota bZ4X2024 Toyota Camry2024 Toyota Corolla2024 Toyota Corolla Cross2024 Toyota Crown2024 Toyota Grand Highlander2024 Toyota GR Corolla2024 Toyota Highlander2024 Toyota Mirai2024 Toyota Prius2024 Toyota RAV42024 Toyota Sequoia2024 Toyota Sienna2024 Toyota Supra2024 Toyota Tacoma2024 Toyota Tundra2024 Toyota Venza2023 Toyota 4Runner2023 Toyota bZ4X+ 325 more
  Associated Documents

  • DownloadMC-11006161-0001.pdf↗
• July 12, 2024•Document ID: 11007445

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0039-24 Rev1

  Date Added:

  September 7, 2024

  Manufacturer:

  TOYOTA

  Summary

  The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

  Associated Products (431)

  2025 Toyota 4Runner2025 Toyota Camry2025 Toyota Crown Signia2024 Toyota 4Runner2024 Toyota bZ4X2024 Toyota Camry2024 Toyota Corolla2024 Toyota Corolla Cross2024 Toyota Crown2024 Toyota Grand Highlander2024 Toyota GR Corolla2024 Toyota Highlander2024 Toyota Mirai2024 Toyota Prius2024 Toyota RAV42024 Toyota Sequoia2024 Toyota Sienna2024 Toyota Supra2024 Toyota Tacoma2024 Toyota Tundra+ 411 more
  Associated Documents

  • DownloadMC-11007445-0001.pdf↗
• July 12, 2024•Document ID: 11007444

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0038-24 Rev1

  Date Added:

  September 7, 2024

  Manufacturer:

  TOYOTA

  Summary

  To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

  Associated Products (431)

  2025 Toyota 4Runner2025 Toyota Camry2025 Toyota Crown Signia2024 Toyota 4Runner2024 Toyota bZ4X2024 Toyota Camry2024 Toyota Corolla2024 Toyota Corolla Cross2024 Toyota Crown2024 Toyota Grand Highlander2024 Toyota GR Corolla2024 Toyota Highlander2024 Toyota Mirai2024 Toyota Prius2024 Toyota RAV42024 Toyota Sequoia2024 Toyota Sienna2024 Toyota Supra2024 Toyota Tacoma2024 Toyota Tundra+ 411 more
  Associated Documents

  • DownloadMC-11007444-0001.pdf↗
• July 12, 2024•Document ID: 11007443

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0035-24 Rev1

  Date Added:

  September 7, 2024

  Manufacturer:

  TOYOTA

  Summary

  Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

  Associated Products (431)

  2025 Toyota 4Runner2025 Toyota Camry2025 Toyota Crown Signia2024 Toyota 4Runner2024 Toyota bZ4X2024 Toyota Camry2024 Toyota Corolla2024 Toyota Corolla Cross2024 Toyota Crown2024 Toyota Grand Highlander2024 Toyota GR Corolla2024 Toyota Highlander2024 Toyota Mirai2024 Toyota Prius2024 Toyota RAV42024 Toyota Sequoia2024 Toyota Sienna2024 Toyota Supra2024 Toyota Tacoma2024 Toyota Tundra+ 411 more
  Associated Documents

  • DownloadMC-11007443-0001.pdf↗
• July 12, 2024•Document ID: 11006151

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0039-24 Rev1

  Date Added:

  August 8, 2024

  Manufacturer:

  TOYOTA

  Summary

  The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

  Associated Products (431)

  2025 Toyota 4Runner2025 Toyota Camry2025 Toyota Crown Signia2024 Toyota 4Runner2024 Toyota bZ4X2024 Toyota Camry2024 Toyota Corolla2024 Toyota Corolla Cross2024 Toyota Crown2024 Toyota Grand Highlander2024 Toyota GR Corolla2024 Toyota Highlander2024 Toyota Mirai2024 Toyota Prius2024 Toyota RAV42024 Toyota Sequoia2024 Toyota Sienna2024 Toyota Supra2024 Toyota Tacoma2024 Toyota Tundra+ 411 more
  Associated Documents

  • DownloadMC-11006151-0001.pdf↗
• July 12, 2024•Document ID: 11006150

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0038-24 Rev1

  Date Added:

  August 8, 2024

  Manufacturer:

  TOYOTA

  Summary

  To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

  Associated Products (431)

  2025 Toyota 4Runner2025 Toyota Camry2025 Toyota Crown Signia2024 Toyota 4Runner2024 Toyota bZ4X2024 Toyota Camry2024 Toyota Corolla2024 Toyota Corolla Cross2024 Toyota Crown2024 Toyota Grand Highlander2024 Toyota GR Corolla2024 Toyota Highlander2024 Toyota Mirai2024 Toyota Prius2024 Toyota RAV42024 Toyota Sequoia2024 Toyota Sienna2024 Toyota Supra2024 Toyota Tacoma2024 Toyota Tundra+ 411 more
  Associated Documents

  • DownloadMC-11006150-0001.pdf↗
• July 12, 2024•Document ID: 11006149

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0035-24 Rev1

  Date Added:

  August 8, 2024

  Manufacturer:

  TOYOTA

  Summary

  Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

  Associated Products (431)

  2025 Toyota 4Runner2025 Toyota Camry2025 Toyota Crown Signia2024 Toyota 4Runner2024 Toyota bZ4X2024 Toyota Camry2024 Toyota Corolla2024 Toyota Corolla Cross2024 Toyota Crown2024 Toyota Grand Highlander2024 Toyota GR Corolla2024 Toyota Highlander2024 Toyota Mirai2024 Toyota Prius2024 Toyota RAV42024 Toyota Sequoia2024 Toyota Sienna2024 Toyota Supra2024 Toyota Tacoma2024 Toyota Tundra+ 411 more
  Associated Documents

  • DownloadMC-11006149-0001.pdf↗
• June 21, 2024•Document ID: 11005122

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0055-24

  Date Added:

  July 23, 2024

  Manufacturer:

  TOYOTA

  Summary

  Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

  Associated Products (348)

  2024 Toyota 4Runner2024 Toyota bZ4X2024 Toyota Camry2024 Toyota Corolla2024 Toyota Corolla Cross2024 Toyota Crown2024 Toyota Grand Highlander2024 Toyota GR Corolla2024 Toyota Highlander2024 Toyota Mirai2024 Toyota Prius2024 Toyota RAV42024 Toyota Sequoia2024 Toyota Sienna2024 Toyota Supra2024 Toyota Tacoma2024 Toyota Tundra2024 Toyota Venza2023 Toyota 4Runner2023 Toyota bZ4X+ 328 more
  Associated Documents

  • DownloadMC-11005122-0001.pdf↗
• June 21, 2024•Document ID: 11005064

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0055-24

  Date Added:

  July 23, 2024

  Manufacturer:

  TOYOTA

  Summary

  Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

  Associated Products (348)

  2024 Toyota 4Runner2024 Toyota bZ4X2024 Toyota Camry2024 Toyota Corolla2024 Toyota Corolla Cross2024 Toyota Crown2024 Toyota Grand Highlander2024 Toyota GR Corolla2024 Toyota Highlander2024 Toyota Mirai2024 Toyota Prius2024 Toyota RAV42024 Toyota Sequoia2024 Toyota Sienna2024 Toyota Supra2024 Toyota Tacoma2024 Toyota Tundra2024 Toyota Venza2023 Toyota 4Runner2023 Toyota bZ4X+ 328 more
  Associated Documents

  • DownloadMC-11005064-0001.pdf↗
• May 17, 2024•Document ID: 11005153

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0061-23 Rev1

  Date Added:

  July 23, 2024

  Manufacturer:

  TOYOTA

  Summary

  Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.

  Associated Products (431)

  2025 Toyota 4Runner2025 Toyota Crown Signia2025 Toyota Tacoma2024 Toyota 4Runner2024 Toyota bZ4X2024 Toyota Camry2024 Toyota Corolla2024 Toyota Corolla Cross2024 Toyota Crown2024 Toyota Grand Highlander2024 Toyota GR Corolla2024 Toyota Highlander2024 Toyota Mirai2024 Toyota Prius2024 Toyota RAV42024 Toyota Sequoia2024 Toyota Sienna2024 Toyota Supra2024 Toyota Tacoma2024 Toyota Tundra+ 411 more
  Associated Documents

  • DownloadMC-11005153-0001.pdf↗
• May 15, 2024•Document ID: 11005149

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0062-23 Rev1

  Date Added:

  July 23, 2024

  Manufacturer:

  TOYOTA

  Summary

  Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.

  Associated Products (403)

  2025 Toyota 4Runner2025 Toyota Camry2025 Toyota Crown Signia2024 Toyota bZ4X2024 Toyota Camry2024 Toyota Corolla2024 Toyota Corolla Cross2024 Toyota Crown2024 Toyota Grand Highlander2024 Toyota GR Corolla2024 Toyota Highlander2024 Toyota Mirai2024 Toyota Prius2024 Toyota RAV42024 Toyota Sequoia2024 Toyota Sienna2024 Toyota Supra2024 Toyota Tacoma2024 Toyota Tundra2024 Toyota Venza+ 383 more
  Associated Documents

  • DownloadMC-11005149-0001.pdf↗
• April 19, 2024•Document ID: 11003649

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0039-24

  Date Added:

  July 6, 2024

  Manufacturer:

  TOYOTA

  Summary

  The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

  Associated Products (418)

  2024 Toyota 4Runner2024 Toyota bZ4X2024 Toyota Camry2024 Toyota Corolla2024 Toyota Corolla Cross2024 Toyota Crown2024 Toyota Grand Highlander2024 Toyota GR Corolla2024 Toyota Highlander2024 Toyota Mirai2024 Toyota Prius2024 Toyota RAV42024 Toyota Sequoia2024 Toyota Sienna2024 Toyota Supra2024 Toyota Tacoma2024 Toyota Tundra2024 Toyota Venza2023 Toyota 4Runner2023 Toyota bZ4X+ 398 more
  Associated Documents

  • DownloadMC-11003649-0001.pdf↗
• April 19, 2024•Document ID: 11003647

  Service Bulletin/Repair Instructions
  STRUCTURE:BODY

  Mfr Comm. #:

  T-SB-0038-24

  Date Added:

  July 6, 2024

  Manufacturer:

  TOYOTA

  Summary

  To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.

  Associated Products (446)

  2025 Toyota Camry2025 Toyota Crown2024 Toyota 4Runner2024 Toyota bZ4X2024 Toyota Camry2024 Toyota Corolla2024 Toyota Corolla Cross2024 Toyota Crown2024 Toyota Grand Highlander2024 Toyota GR Corolla2024 Toyota Highlander2024 Toyota Mirai2024 Toyota Prius2024 Toyota RAV42024 Toyota Sequoia2024 Toyota Sienna2024 Toyota Supra2024 Toyota Tacoma2024 Toyota Tundra2024 Toyota Venza+ 426 more
  Associated Documents

  • DownloadMC-11003647-0001.pdf↗