Mitsubishi · Model Report
Showing safety data for the 2009 model year only.
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2008-2010 Lancer, 2009-2010 Lancer Sportback, 2008-2013 Outlander, and 2011-2016 Outlander Sport vehicles originally sold in, or ever registered in, Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. The front lower control arms may detach due to the front cross member corroding from salt water exposure such as from road salt use.
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2007-2010 Outlander, 2008-2010 Lancer, 2009-2010 Lancer Evolution, and 2010 Lancer Sportback vehicles equipped with sunroofs. The sunroof glass may detach from the sunroof assembly, becoming a road hazard to other vehicles.
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2009-2012 Lancer, 2008-2012 Outlander, 2010-2012 Lancer Sportback, and 2011-2012 Outlander Sport vehicles equipped with either a 4B11 or 4B12 engine. The drive belt automatic tensioner flange may crack, allowing the accessory drive belt to detach.
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2007-2013 Outlander vehicles. In the affected vehicles, water may drop between the hood and the windshield and leak into the wiper motor breathing hole. The water may cause internal corrosion of the windshield wiper motor and the possible failure of the motor.
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2007-2013 Outlander vehicles manufactured September 8, 2006, to March 29, 2013. In the affected vehicles, water may enter between the hood and windshield and cause the front wiper link ball joint to corrode, possibly resulting in the wiper link separating and the wipers becoming inoperative.
I was driving home from work and I came upon a red light as I was slowing down the car started jilting as I went to take off I started jilting again but then smoothed out. The check engine light, ABS brake light and speed traction off light came on.They just all popped on. At the next light it did the same thing , it started to shutter and loss of power on taking off. It was sputtery at the same time which could have caused an accident! I finally make it home in about an hour later I had to run out to the store to get a couple things. I put it in reverse and it started to jitter again so I put it in park I checked all the fluids everything was fine Don't know why the lights were on. Again I put it in reverse Go to pull out of my driveway it starts to jitter. I put it in drive very slow getting up to movement. I slowed to stop at a light and it stalls out right in the middle of the intersection I try to start it back up , it does but now it just will not go anywhere!! there was no warning no loud bangs, pops, or squeals, no loud anything it just stopped. It will engage in each gear but refuses to go anywhere. it feels like it wants to go but it's just not going. This is very dangerous I could have gotten in a serious accident being in the middle of the intersection like that. this problem needs to be fixed upon looking on many forums and internet sites this seems to be a very common issue with the CVT or the 2009 or any outlander for that matter. My car was made in Japan I guess because the VIN starts with J I'm not sure of how to get any recalls from there or if that matters. I'm not sure the history on my vehicle neither or where it was registered last. I wish I knew when and where the repairs have been done for the recalls that my vehicle may have had. My car is doing exactly what the recalls were for; MMNS's number SR-15-002 in June 15th 2015 and also mmna's number SR-18-001 I did change both CVT filters and fluid also the oil and oil filter. Still nothing.
No injuries · No fire · No crash
The MMCS system has a known bug. As of October 2023 the date and time of the system has defaulted back to 2004. The defect has disabled features such as maintenance records that are logged since new. The defect has been reported to the dealer and they have acknowledged there is currently no fix. The dealer also noted that replacing the GPS receiver does not correct the problem and it is likely a head unit firmware issue. There are hundreds of complaints via Internet forums that Mitsubishi equipped MMCS models from approximately 2007 through 2014 are affected. The only way to retrieve any data in the system is to disconnect the GPS receiver and manually input the current date. That fix disables the navigation system in lieu of having all the data the system has stored since new which could be a safety issue for some owners. This is an unacceptable problem for most owners.
No injuries · No fire · No crash
EXACT PROBLEMS AS A RECALL ISSUED ON SELECT 09 OUTLANDER ON 6/25/14 FOR POWER TRAIN: AUTOMATIC TRANSMISSION BUT MY VIN DOES NOT MATCH AS A VEHICLE AFFECTED BY THIS RECALL. IS THERE A POSSIBILITY MY SELECT VEHICLE SHOULD HAVE BEEN INCLUDED IN THIS RECALL? I HAVE SEEN MANY MANY SIMILAR COMPLAINTS STATING THE SAME.
No injuries · No fire · No crash
FRONT CRADLE FRAME ASSEMBLY IS RUSTED TO THE POINT YOU CAN SEE THRU THE LARGE HOLES. TECHNICIANS RECOMMENDATION FRAME RUSTED BEYOND REPAIR, NEEDS TO BE REPLACED. AT A COST OF $2,000
No injuries · No fire · No crash
MITSUBISHI OUTLANDER SE FRONT SUBFRAME CROSSMEMBER CRADLE HAS CORRODED AND WILL NOT PASS INSPECTION. THE CRADLE IS WHERE THE STEERING ATTACHES AND RAISES A SAFETY CONCERN SHOULD THE CRADLE BREAK DUE TO THE CORROSION. THERE ARE MANY MITSUBISHI VEHICLES THAT HAVE A RECALL ON THIS CONDITION, BUT FOR SOME REASON THIS VEHICLE IS NOT INCLUDED.
No injuries · No fire · No crash