Bentley Bentayga Service Bulletins
847 manufacturer communications on file.
- January 22, 2021•Document ID: 10186527Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2062006/1
- Date Added:
- February 2, 2021
- Manufacturer:
- BENTLEY
SummaryLoading message displaying on the Infotainment screen. Customer statement / workshop findings: Loading system, please wait, message constantly displays on the Infotainment screen. Measure: Restart the Infotainment system by pressing the volume rotary knob below the centre display screen for 10 seconds - Refer to the Owner handbook - Operating the Infotainment system - Using the controls
Associated Products (1)Associated Documents - January 14, 2021•Document ID: 10186741Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 2061344/2
- Date Added:
- February 5, 2021
- Manufacturer:
- BENTLEY
SummaryRear brake pad - Shim installation (SC 20/32) Technical background: Fitment of shims to the rear brake pads, specific grease should also be applied to the shims Remedy: In high ambient temperatures in conjunction with low speed, low pressure brake vibration is dampened by the fitment of shims and grease Customer notification: Customers do not need to be informed directly of this campaign. Please ensure that all affected vehicles are checked and repaired during the PDI procedure
Associated Products (1)Associated Documents - January 14, 2021•Document ID: 10186631Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- 2046299/9
- Date Added:
- February 3, 2021
- Manufacturer:
- BENTLEY
SummaryBentayga - 1.2 - 1.4KHz rear brake squeal. Customer statement / workshop findings Squeal from the rear of the vehicle at low speed while braking. Technical background While braking at low speed, a vibration of 1.2 to 1.4 KHz can be produced by the friction between the rear brake pad and disc resulting in a complaint of brake noise from the customer
Associated Products (1)Associated Documents - January 14, 2021•Document ID: 10186528Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2061566/2
- Date Added:
- February 2, 2021
- Manufacturer:
- BENTLEY
SummaryDuring PDI - Unable to complete the set-up of Connected Services. Customer statement / workshop findings: VERY IMPORTANT: This TPI is only applicable to vehicles which have the following issues found during the Pre Delivery Inspection ( PDI) Unable to complete set-up of Connected Services at PDI And/or The SOS LED in roof console is either lit red or flashing red and/or the test call is unable to complete. Measure: A DISS query MUST be raised to gain permission prior to starting the onward instructions 1, Ensure flight mode is de-activated in address 75. 2, With the vehicle outside of the workshop check the following Measured values in address 75
Associated Products (2)Associated Documents - January 7, 2021•Document ID: 10186532Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2061757/1
- Date Added:
- February 2, 2021
- Manufacturer:
- BENTLEY
SummaryDTC B2000F2: Faulty control module (Symptom code 4102) and/or Night vision warning light evident within the (DIP). Customer statement Night vision warning lamp (Figure 1) is evident with the Drivers Information Panel (DIP). Measure 1) Check and Confirm there is no damage to the Night vision camera lens - Check and confirm the camera is secure NOTE: Should no issues be found carry out the remaining onward instructions: - Follow the applicable DTC related test plan within ODIS to completion 2) Proceed with the replacement of the Night vision Control unit if required (as per test plan instruction) - Refer to Rep.Gr 44 - Control unit for night vision (J853) - To remove and fit NOTE: The operative MUST ensure the Night vision camera is calibrated as per Rep.Gr 44
Associated Products (1)Associated Documents - December 21, 2020•Document ID: 10185353Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2060895/2
- Date Added:
- January 8, 2021
- Manufacturer:
- BENTLEY
SummaryRear tail lamp flashes - After opening an exterior door - With the vehicle unlocked. Customer statement / workshop findings: When a door is opened with the vehicle unlocked, the boot lamps flash once (Figure 1) Figure 2 shows the correct operation (No flash) Technical background: IMPORTANT NOTE: Please check and confirm if Service Campaign ( SC 20/31) is VIN applicable, In the event that ( SC 20/31) is VIN applicable the instructions within ( SC 20/31) should now be conducted and the instructions within this TPI should be ignored However, should ( SC20/31) NOT be VIN applicable and the rear lamp flash symptom is evident please carry out the remaining instructions within this TPI.
Associated Products (1)Associated Documents - December 17, 2020•Document ID: 10185352Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EXTERIOR LIGHTING
- Mfr Comm. #:
- 2060850/2
- Date Added:
- January 8, 2021
- Manufacturer:
- BENTLEY
SummaryRear lamps - Software update to control units (SC 20/31). Technical background: Software update available for the rear lamp control units (Diagnostic address 070E and 0710) Remedy: Referring to Figure 1 - When a door is opened with the vehicle unlocked, the boot lamps can flash once
Associated Products (1)Associated Documents - December 9, 2020•Document ID: 10185350Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS
- Mfr Comm. #:
- 2061739/1
- Date Added:
- January 8, 2021
- Manufacturer:
- BENTLEY
SummaryTPMS - Warning within the Drivers Information Panel (DIP). Customer statement / workshop findings Yellow Tyre Pressure Monitoring System (TPMS) warning light is evident with the Drivers Information Panel (DIP) The warning is evident when the tyre size has been changed within the MMI For example: After changing the tyres from winter to summer variants or vice versa Technical background If the tyre size type in the MMI is changed a yellow TPMS warning light within the DIP will be evident The ability to drive the vehicle will not be affected. The warning light will be displayed as follows: After a 4 minute drive cycle, The (TPMS) will enter into a partially active mode and outputs a warning within the (DIP) as shown in Figure 1
Associated Products (2)Associated Documents - December 9, 2020•Document ID: 10185348Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2061582/1
- Date Added:
- January 8, 2021
- Manufacturer:
- BENTLEY
SummaryDriver/Passenger door/s power latch creak on close. Customer statement / workshop findings Driver or Passenger door creak during the power latch Close function Technical background IMPORTANT: Refer to the vehicle repair history. In the event that all four power latch drive units have been replaced previously, only the individual/faulty drive unit should now be replaced Measure Ensure the fault is as described within the Customer statement, refer to the video on the Bentley Hub referencing TPI 2052394/-
Associated Products (1)Associated Documents - December 9, 2020•Document ID: 10185343Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2058484/4
- Date Added:
- January 8, 2021
- Manufacturer:
- BENTLEY
SummaryBentayga V8 Kovomo - Check Engine Lamp - Fuel Pressure Regulation. Customer statement / workshop findings Check Engine Lamp illuminated within the Driver Instrument Panel (DIP) with one or multiple DTCs as detailed below: P310B00 Low Fuel Pressure Regulation. P014800 Fuel Deliver Error. P019100 Fuel Rail pressure Sensor Circuit Range/Performance. Misfire DTC. There may be multiple DTCs and symptoms present due to fuel pressure regulation or fuel supply issues
Associated Products (1)Associated Documents - December 2, 2020•Document ID: 10185333Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2061566/1
- Date Added:
- January 8, 2021
- Manufacturer:
- BENTLEY
SummaryDuring PDI - Unable to complete the set-up of Connected Services. Customer statement / workshop findings: VERY IMPORTANT: This TPI is only applicable to vehicles which have the following issues found during the Pre Delivery Inspection ( PDI) Unable to complete set-up of Connected Services at PDI And/or The SOS LED in roof console is either lit red or flashing red and/or the test call is unable to complete. Technical background: Refer to the Measure section of this TPI
Associated Products (2)Associated Documents - December 2, 2020•Document ID: 10185330Service Bulletin/Repair InstructionsSTEERING; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 2060223/3
- Date Added:
- January 8, 2021
- Manufacturer:
- BENTLEY
SummaryDuring PDI - Steering wheel vibration and/or steering wheel out of alignment is evident. Customer statement / workshop findings: VERY IMPORTANT: This TPI is only applicable to vehicles which have the following issues found during the Pre Delivery Inspection ( PDI) Vehicle is pulling to the left or right Or Steering wheel vibration Or General vehicle geometry concerns. Technical background: In the event that during the Pre Delivery Inspection procedure (PDI) the steering wheel is shaking/vibrating or out of alignment, please refer to the instructions within the Measure section. IMPORTANT: The steering geometry procedure should only be conducted by the retailer once permission has been given from Product Support via an existing or new DISS query
Associated Products (2)Associated Documents - December 1, 2020•Document ID: 10185238Service Bulletin/Repair InstructionsEQUIPMENT; SERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 2061344/1
- Date Added:
- January 8, 2021
- Manufacturer:
- BENTLEY
SummaryRear brake pad - Shim installation (SC 20/32) Technical background: Fitment of shims to the rear brake pads, specific grease should also be applied to the shims Remedy: In high ambient temperatures in conjunction with low speed, low pressure brake vibration is dampened by the fitment of shims and grease
Associated Products (1)Associated Documents - November 23, 2020•Document ID: 10183731Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2061512/1
- Date Added:
- December 5, 2020
- Manufacturer:
- BENTLEY
SummaryBank 1 - Intake manifold sensor replacement (SC 20/35). Technical background: Bank 1 Intake manifold sensor requires replacement Remedy: Replacement of the Bank 1 Intake manifold sensor
Associated Products (1)Associated Documents - November 23, 2020•Document ID: 10183623Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2061040/2
- Date Added:
- December 3, 2020
- Manufacturer:
- BENTLEY
SummaryAbnormal buzzing/vibrating/grinding noise (Front of vehicle). Customer statement / workshop findings. Customer statement: Buzzing/vibrating/grinding noise can be heard from the front of the engine, mainly from cold start at idle Workshop findings Noise emitting from the air conditioning belt idler (Figure 1 Point A) Technical background: Should the noise be evident from the air conditioning belt idler - Refer to the Measure section of this TPI The operative must confirm the noise is not from any other components for example the alternator belt tensioner before conducting the instructions within the Measure section of this TPI.
Associated Products (1)Associated Documents - November 18, 2020•Document ID: 10183656Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 2061369/1
- Date Added:
- December 4, 2020
- Manufacturer:
- BENTLEY
SummaryEngine overheating - Warning on the DIP - V8 Kovomo. Customer statement / workshop findings: -Customer reports an engine overheat warning on the DIP -Engine overheats -Unusual cooling fan operation at high temperatures -There are no signs of coolant leaks both internally or externally Technical background: To heat the engine as quickly as possible during cold starting, delivery of coolant by the coolant pump is interrupted in the warm-up phase by the solenoid for the mechanical coolant pump. The solenoid is designed to cut off the vacuum supply to the coolant pump when the engine reaches the maximum temperature, the vacuum cut off allows the engine to start circulating coolant by retracting a sleeve which is situated around the coolant pump impeller. When the solenoid is at fault (sticking open) the vacuum supply is constant, this allows the sleeve to stay in position around the impellor which leads to the symptoms described within the Customer statement/Workshop findings section of this TPI.
Associated Products (2)Associated Documents - November 17, 2020•Document ID: 10183621Service Bulletin/Repair InstructionsSERVICE BRAKES; EQUIPMENT
- Mfr Comm. #:
- 2046299/8
- Date Added:
- December 3, 2020
- Manufacturer:
- BENTLEY
SummaryBentayga - 1.2 - 1.4KHz rear brake squeal. Customer statement / workshop findings: Squeal from the rear of the vehicle at low speed while braking. Technical background: While braking at low speed, a vibration of 1.2 to 1.4 KHz can be produced by the friction between the rear brake pad and disc resulting in a complaint of brake noise from the customer.
Associated Products (1)Associated Documents - November 11, 2020•Document ID: 10183622Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- 2052394/10
- Date Added:
- December 3, 2020
- Manufacturer:
- BENTLEY
SummaryNew Continental GT - New Continental GTC and Bentayga Driver/Passenger door power latch creak on close. Customer statement / workshop findings: Driver or Passenger door creak during the power latch Close function. Technical background: Refer to the Measure section of this TPI
Associated Products (1)Associated Documents - November 11, 2020•Document ID: 10183475Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT
- Mfr Comm. #:
- 2051562/6
- Date Added:
- December 2, 2020
- Manufacturer:
- BENTLEY
SummaryAll Models - 12 Volt Battery condition checks. Technical background For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the Measure section of this TPI.
Associated Products (2)Associated Documents - November 9, 2020•Document ID: 10183730Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2060850/1
- Date Added:
- December 5, 2020
- Manufacturer:
- BENTLEY
SummaryRear lamps - Software update to control units (SC 20/31). Technical background Software update available for the rear lamp control units (Diagnostic address 070E and 0710) Remedy: Latest level software is now available to eliminate this issue.The update refines the operation of the rear lamps
Associated Products (1)Associated Documents