Audi A3 Service Bulletins
2,982 manufacturer communications on file.
- August 7, 2013•Document ID: 10124660Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- A461353 2034181-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryCustomer may report hearing brake noise from front or rear brakes. Customers may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking.
Associated Products (41)Associated Documents - August 1, 2013•Document ID: 10124680Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:DELIVERY
- Mfr Comm. #:
- A011318 2013147-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 15 number 11-22 dated May 31, 2011. MIL on. DTC P2293 (Fuel pressure regulator 2 performance) is stored in the engine control module (ECM). DTCs may be stored in combination with DTC P2293. Excessive wear of the cam lobe (in the intake camshaft) that drives the high pressure fuel pump limits the maximum pump piston lift, causing fuel rail pressure fluctuations. The wear on the cam lobe also leads to wear in the base of the high pressure fuel pump cam follower.
Associated Products (5)Associated Documents - August 1, 2013•Document ID: 10124648Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES:DOORS:LATCH
- Mfr Comm. #:
- A571392 2022032-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 57 number 11-49 dated August 8, 2011. The customer inquires about the operation of the vehicle locking, and may suggest that the vehicle "locked itself". The lock command history is stored in the convenience system control module (J393).
Associated Products (62)Associated Documents - July 31, 2013•Document ID: 10053887Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); STEERING:GEAR BOX (OTHER THAN RACK AND PINION)
- Mfr Comm. #:
- TSB-37-13-10
- Date Added:
- December 2, 2013
- Manufacturer:
- AUDI
SummaryAUDI: DUE TO A POSSIBLE MALFUNCTION OF GEARBOX, IN SOME VEHICLES, A MESSAGE MAY APPEAR IN CLUSTER AND BETWEEN AUTOMATIC TRANSMISSION FLUID (ATF) AND TRANSMISSION CONTROL MODULE, A REACTION MAY OCCUR. MODEL 2012-2013 A4, A5 CABRIOLET, A6. *PE
Associated Products (5)Associated Documents - July 30, 2013•Document ID: 10244014Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- ChartK
- Date Added:
- October 16, 2023
- Manufacturer:
- AUDI
SummaryFLUID CAPACITY CHART
Associated Products (1)Associated Documents - July 29, 2013•Document ID: 10243791Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition46
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (175)Associated Documents - July 24, 2013•Document ID: 10216642Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- 134020345501
- Date Added:
- August 1, 2022
- Manufacturer:
- AUDI
SummaryThe instrument cluster is pre-programmed to allow a maximum service interval of 15,000 kilometers, and checks to see that this value is not exceeded. The US market uses a service interval of 10,000 miles, which is equal to 16,000 kilometers. Because this value is higher than the maximum allowed service interval, the discrepancy causes the DTC to set.
Associated Products (3)Associated Documents - July 24, 2013•Document ID: 10068148Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 2026756/3
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (3)Associated Documents - July 24, 2013•Document ID: 10065722Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- 2034550/1
- Date Added:
- May 19, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (3)Associated Documents - July 24, 2013•Document ID: 10124582Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- A911395 2034511-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryDTC 02261 (Data medium - Faulty) is sporadically set in the navigation control module, J401 (address word 37). The vehicle has the MY2014 navigation database installed. The DVD label should read "Version 2013/2014". If the DTC is static, or if there are functional issues with the navigation system, this bulletin does not apply. A change in the MY2014 navigation software is causing the RNS-E unit to trigger this DTC.
Associated Products (14)Associated Documents - July 24, 2013•Document ID: 10124521Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- A901339 2026756-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 11-27 dated August 4, 2011. The service interval display cannot be reset. If the service interval display is reset under the menu point Service Work in Guided Functions or Guided Fault Finding, the counter for the mileage and time-related service may not be reset. Therefore, Service due or Service! is still shown.
Associated Products (3)Associated Documents - July 24, 2013•Document ID: 10124493Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- A171340 2034550-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryDTC 00003 (Control Module - no or incorrect basic setting/adaptation) is stored in the instrument cluster control module, J285 (address word 17). It may be present following a reset of the Service Reminder Interval. There are no functional issues with the instrument cluster. The instrument cluster is pre-programmed to allow a maximum service interval of 15,000 kilometers, and checks to see that this value is not exceeded. The US market uses a service interval of 10,000 miles, which is equal to 16,000 kilometers. Because this value is higher than the maximum allowed service interval, the discrepancy causes the DTC to set.
Associated Products (3)Associated Documents - July 22, 2013•Document ID: 10243790Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition45
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (178)Associated Documents - July 22, 2013•Document ID: 10124512Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- A481346 2021191-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 40 number 09-06 dated August 3, 2009. Customer hears squeaking noises when turning or maneuvering the steering wheel. The folds of the outer CV joint rubber boots can touch each other when the steering wheel is turned.
Associated Products (34)Associated Documents - July 19, 2013•Document ID: 10226502Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL:ACCELERATOR PEDAL
- Mfr Comm. #:
- 37130920287152
- Date Added:
- November 21, 2022
- Manufacturer:
- AUDI
SummaryRough gear changes both when accelerating and slowing down
Associated Products (92)Associated Documents - July 19, 2013•Document ID: 10210652Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY; POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:GEARS
- Mfr Comm. #:
- 37 13 09 2028715
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryAfter a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.
Associated Products (101)Associated Documents - July 19, 2013•Document ID: 10124584Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- A911393 2034784-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySome telephone numbers that were downloaded via Bluetooth® are stored with additional, unrelated numbers that do not appear in the contact on the customer"s cellular phone. These telephone numbers are displayed incorrectly on the radio display. The software incorrectly stores the downloaded phone numbers.
Associated Products (30)Associated Documents - July 19, 2013•Document ID: 10124499Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- A371309 2028715-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 37 number 12-40 dated February 28, 2012. Rough gear changes, both when accelerating and when slowing down. There is a rough driving power disruption that occurs sporadically and lasts for less than a second. After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.
Associated Products (100)Associated Documents - July 19, 2013•Document ID: 10053883Service Bulletin/Repair InstructionsSTEERING:GEAR BOX (OTHER THAN RACK AND PINION)
- Mfr Comm. #:
- TSB-37-13-09
- Date Added:
- December 2, 2013
- Manufacturer:
- AUDI
SummaryAUDI: IN SOME VEHICLES, THE CLUTCHES, AFTER HAVING TORQUE CONVERTER, COMPLETE GEARBOX REPLACEMENT OR MECHATRONICS, MUST ADAPT TO NEW COMPONENTS WITH GRADUAL MOVING OF CLUTCH LININGS IN MOST DIVERSE LOAD CONDITIONS. MODELS 2004-14, A3, TT, Q7, A4, A5, A6, A7, A8, Q5, S4, S5, S6, S7, RS5. *PE
Associated Products (87)Associated Documents - July 16, 2013•Document ID: 10124525Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A911392 2030947-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 12-61 dated September 25, 2012. The customer complains that when he or she is trying to place a phone call from the vehicle while using a Bluetooth®-connected phone, the phone call disconnects before it begins and an error shows on the MMI display. The message may be "Function not supported" or "Network error". The customer is using a phone with the Android operating system. In addition, Skype®, or another network-based communication software, is installed on the phone. Call can be placed directly from the phone without a problem. When the phone gets the request to place a call from the vehicle, a prompt appears on the phone asking the user to choose how the call should be placed. If the prompt is ignored, the MMI system disconnects the call assuming the phone is not responding.
Associated Products (112)Associated Documents