2024-2025 Jeep Wrangler/Gladiator Overhead Sound Bar Buzzes
Jeep has issued Technical Service Bulletin (TSB) 23-026-25 to address customer complaints of buzzing or rattling noises emanating from the overhead sound bar speaker assembly in certain 2024-2025 Jeep Wrangler and Gladiator models. The issue is attributed to a clearance problem and can be resolved…
Sarah Mitchell2024 Jeep Wrangler
Gilt auch für
- Jeep Gladiator
- 2024–2025
- Jeep Wrangler
- 2025
Owners of 2024-2025 Jeep Wrangler and Jeep Gladiator vehicles may notice an annoying "Overhead sound bar speaker assembly buzzes or rattles" coming from the vehicle's interior. This issue, identified as a clearance problem, is addressed by Jeep Technical Service Bulletin (TSB) 23-026-25. This bulletin outlines a procedure for technicians to eliminate the noise by applying a foam strip.
Symptoms
The primary symptom customers will experience is an "Overhead sound bar speaker assembly buzzes or rattles." This noise originates from the speaker assembly located in the overhead sound bar of the vehicle.
Diagnosis and Trigger Conditions
If you are experiencing the symptom of a Jeep Wrangler sound bar rattles, a qualified technician will perform a diagnostic check. The condition is directly linked to the audible buzzing or rattling from the overhead sound bar, indicating the need for the repair procedure described in TSB 23-026-25.
Repair Procedure Summary
The repair for the Jeep Wrangler sound bar rattles involves applying a foam strip to the back side of the sound bar speaker assembly. For PHEV vehicles, the process begins with disconnecting the 12-volt battery. Next, the speaker enclosure, also known as the Sport Bar/Sound Bar, is carefully removed. A foam block (Part No. 68734826AA) is then applied to the top of the sound bar, positioned next to a grommet and touching an upstanding wall, as illustrated in Figure 1 of the TSB. Finally, the speaker enclosure is reinstalled, and for PHEV models, the 12-volt battery is reconnected.
Required Tools or Parts
To perform this repair, a specific part is required:
- Part No.: 68734826AA
- Description: Foam, Noise Vibration
- Quantity: 1
Important Warnings
This bulletin, TSB 23-026-25, specifically applies to 2024-2025 Jeep Wrangler (JL) and 2024-2025 Jeep Gladiator (JT) vehicles that were built before January 06, 2025 (MDH 0106XX). The repair is reimbursable within the provisions of the warranty, meaning owners should not incur costs for this specific fix if their vehicle is still under warranty.
Owner Action
If your 2024-2025 Jeep Wrangler or Gladiator is exhibiting an "Overhead sound bar speaker assembly buzzes or rattles," you should contact your authorized Jeep dealership. Inform them about the noise and mention Technical Service Bulletin (TSB) 23-026-25. The dealership will be able to perform the necessary repair, which involves installing a foam strip to resolve the clearance issue causing the noise. This service is typically covered under warranty.
Source: NHTSA ID: 11020119
Galerie
1 Bild
Frequently Asked Questions
- What is TSB 23-026-25 about?
- TSB 23-026-25 addresses customer complaints regarding buzzing or rattling noises from the overhead sound bar speaker assembly in certain 2024-2025 Jeep Wrangler and Gladiator vehicles. It provides a repair procedure to fix this clearance issue.
- Which vehicles are affected by the 'Overhead sound bar speaker assembly buzzes or rattles' issue?
- This issue affects 2024-2025 Jeep Wrangler (JL) and 2024-2025 Jeep Gladiator (JT) models built before January 06, 2025 (MDH 0106XX). These vehicles may experience the Jeep Wrangler sound bar rattles.
- How is the overhead sound bar rattling fixed?
- The repair involves applying a specific foam strip (Part No. 68734826AA) to the back side of the overhead sound bar speaker assembly to resolve the clearance issue causing the noise. For PHEV models, the 12-volt battery is disconnected and reconnected during the process.
- Will I have to pay for the repair described in TSB 23-026-25?
- No, the repair outlined in TSB 23-026-25 is reimbursable within the provisions of the warranty. If your vehicle is still under warranty, you should not incur any cost for this service.
Related Articles
2024 Jeep Wrangler Problems: Recalls, Complaints & TSBs
The 2024 Jeep Wrangler has faced four safety recalls, primarily concerning exterior lighting and airbag deployment. While no owner complaints or federal investigations have been reported, twenty manufacturer service bulletins address various issues from engine performance and electrical glitches…
2024-2026 Jeep, Ram, Dodge Cylinder Head Bolt Inspection
Mopar has issued a Quality Inspection Request (QIR) concerning cylinder head cover bolts, part number 04893799AJ, for various 2024-2026 Jeep, Ram, and Dodge models. Dealers are instructed to identify and quarantine suspect bolts with a chamfered flange.
2024 Jeep Wrangler PCM Update for Misfire & O2 Sensor DTCs
A Technical Service Bulletin (TSB 18-003-26 REV. A) has been issued for the 2024 Jeep Wrangler to address various engine performance issues, including misfires, rough idle, and O2 sensor fault codes. This update involves reprogramming the Powertrain Control Module (PCM).
2021-2026 Jeep Wrangler / Gladiator Wind Noise TSB S2623000018
This technical service bulletin, S2623000018, addresses "Wind Noise From Hard Top Freedom Panels Near Rear View Mirror While Driving" in 2021-2026 Jeep Wrangler and Gladiator models, detailing a diagnostic and repair procedure involving the header seal.
2024 Jeep Wrangler Heated Steering Wheel Not Working TSB
If your 2024 Jeep Wrangler's heated steering wheel isn't working or isn't warm enough, Technical Service Bulletin (TSB) 08-121-26 from Stellantis outlines a software update for the Comfort Seat Wheel Module (CSWM) to resolve the issue.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.