Service-Bulletin

2021-2023 Jeep, Dodge, RAM Engine Oil Filter Adapter Service

This manufacturer communication, NHTSA ID 10247905, outlines a service procedure for the Engine Oil Filter Adapter (OFA) on 2021-2023 Jeep, Dodge, and RAM vehicles equipped with Pentastar V6 engines. It details specific steps for different model years and mileage.

ByAhmet Topcu — Founder & Editor-in-Chief2022 Jeep Wrangler
2022 Jeep Wrangler — 2022 Jeep Wrangler manufacturer_communication
Editorial illustration generated for this article.
ADAPTER, Engine Oil FilterPentastar V6S1809000007 REV. CEngine Oil Filter AdapterOFAOil Temp/Pressure Sensorblack O-ringred O-ringJeep Wrangler engine oil filter adapterDodge Charger engine oil filter adapter
Jeep Cherokee
2021–2022
Jeep Gladiator
2021–2023
Jeep Grand Cherokee
2021–2022
Jeep Grand Wagoneer
2022
Jeep Wagoneer
2022
Jeep Wrangler
2021, 2023
▸ 4 weitere anzeigen
Dodge Challenger
2021–2023
Dodge Charger
2021–2023
Dodge Durango
2021–2022
Ram 1500
2021–2023

This manufacturer communication, identified as NHTSA ID 10247705 and TSB S1809000007 REV. C, provides important guidance for servicing the Engine Oil Filter Adapter (OFA) on vehicles equipped with the Pentastar V6 engine. This includes models like the 2022 Jeep Wrangler, addressing potential issues related to this critical engine component. The communication specifies different procedures based on the vehicle's model year and mileage.

What the TSB Addresses

This technical service bulletin (TSB) focuses on the ADAPTER, Engine Oil Filter, commonly referred to as the OFA. The OFA is an integral part of the engine's lubrication system, housing the oil filter and often incorporating sensors for oil temperature and pressure. The TSB provides a detailed service procedure to ensure proper function and prevent potential issues with the adapter and its seals.

Diagnosis and Service Procedure

The TSB outlines specific actions for technicians to address the Engine Oil Filter Adapter. For all 2014 model year vehicles, the entire Oil Filter Adapter (OFA) should be replaced. For other model years with mileage exceeding 30,000, technicians are instructed to review and follow the instructions from STAR Online S1809000007 REV. C, which is available on Dealer Connect.

The general procedure for vehicles with over 30,000 miles involves removing the OFA, replacing only the oil inlet O-ring and gaskets using a seals kit, and then re-installing the OFA. It is crucial to use the correct O-ring color: black O-rings are specified for 2023 model year vehicles and beyond, while red O-rings are used for 2022 model year vehicles and prior. When replacing the OFA, it may also be necessary to transfer the Oil Temp/Pressure Sensor from the old adapter to the new one.

Required Parts and Tools

For the service procedure, a seals kit containing the necessary oil inlet O-ring and gaskets is required. Technicians must ensure they use the correct color O-ring (black or red) based on the vehicle's model year, as specified in TSB S1809000007 REV. C. No special tools are explicitly mentioned beyond standard workshop equipment for removing and reinstalling the OFA.

Owner Action

If you own a 2021-2023 Jeep, Dodge, or RAM vehicle with a Pentastar V6 engine, especially if it's a 2022 Jeep Wrangler manufacturer_communication indicates that your vehicle may be subject to this service procedure. If you experience any symptoms related to oil leaks or engine warning lights that could be associated with the Engine Oil Filter Adapter, it is recommended to contact your authorized dealership. They can review the specific requirements of TSB S1809000007 REV. C and determine if your vehicle requires this service. This procedure is typically performed under warranty if applicable, or as a recommended maintenance item.


Source: NHTSA ID: 10247905

Frequently Asked Questions

What is the purpose of the Engine Oil Filter Adapter (OFA) service?
The service procedure for the Engine Oil Filter Adapter (OFA) aims to address potential issues with the adapter and its seals, ensuring proper engine lubrication and preventing oil leaks. It involves inspection and replacement of specific components like O-rings and gaskets.
Which vehicles are covered by TSB S1809000007 REV. C?
TSB S1809000007 REV. C applies to various 2021-2023 Jeep, Dodge, and RAM vehicles equipped with the Pentastar V6 engine. This includes models such as the 2022 Jeep Wrangler, Dodge Charger, and RAM 1500.
Are there different procedures for different model years?
Yes, the TSB specifies different procedures. For all 2014 model year vehicles, the entire OFA is replaced. For other model years with over 30,000 miles, the procedure involves replacing only the oil inlet O-ring and gaskets from a seals kit.
What is the significance of the O-ring color mentioned in the TSB?
The O-ring color is crucial for proper installation. The TSB specifies using black O-rings for 2023 model year vehicles and beyond, while red O-rings are designated for 2022 model year vehicles and prior. Using the correct O-ring ensures proper sealing and performance of the Engine Oil Filter Adapter.

Related Articles

2022 Jeep Wrangler Health Check: Recalls and Bulletins

The 2022 Jeep Wrangler has faced a significant rearview camera recall (24V676000) and numerous technical service bulletins addressing engine misfires, electrical system malfunctions, and transmission issues. While there are no reported owner complaints or federal investigations, prospective and…

2022 Jeep Wrangler Misfire TSB 18-047-26

A Technical Service Bulletin (TSB 18-047-26) has been issued for 2022 Jeep Wrangler vehicles equipped with the 3.6L V6 24V VVT ETORQUE engine. This TSB addresses engine misfires, rough idle, and noisy valvetrain issues, often accompanied by a Malfunction Indicator Lamp (MIL) illumination and…

2021-2026 Jeep Wrangler Rear Defroster Inoperative TSB

This Technical Service Bulletin (TSB) 08-133-26 addresses a common problem in 2021-2026 Jeep Wrangler (JL) vehicles where the rear defroster becomes inoperative due to detached solder terminals or faulty electrical connectors. Learn about the symptoms, cause, and repair procedure.

2018-2022 Jeep Wrangler / Gladiator CEL/MIL Lamp Recall

FCA US LLC has issued Emission Recall 16C for certain 2018-2022 Jeep Wrangler and 2020-2022 Jeep Gladiator vehicles. This recall addresses an issue where the Check Engine/Malfunction Indicator Lamp (CEL/MIL) in the instrument panel cluster (IPC) may be inoperable, preventing drivers from being…

2022-2026 Jeep/RAM PCM Updates for MIL and DTCs

Stellantis Technical Service Bulletin (TSB) 18-044-26 addresses Malfunction Indicator Lamp (MIL) illumination and various Diagnostic Trouble Codes (DTCs) in 2022-2026 Jeep and RAM vehicles. This bulletin provides a software update for the Powertrain Control Module (PCM) to resolve these issues.

Comments

Be the first to comment.

Leave a comment

Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.

Verifying you are human...