2023-2025 Jeep Compass/Renegade Plant Mode Activated TSB

Owners of certain 2023-2025 Jeep Compass and Renegade vehicles may encounter a condition identified as "Plant Mode Activated." This issue is detailed in Technical Service Bulletin (TSB) 08-176-24, also released as Rapid Service Update (RSU) 24-111, dated August 2, 2024. The bulletin describes symptoms including a lit Malfunction Indicator Lamp (MIL) and specific diagnostic trouble codes, indicating a problem with the Anti-Lock Brakes System (ABS) module.

Symptoms

Owners of affected vehicles may notice the "Plant Mode Activated" message, accompanied by a Malfunction Indicator Lamp (MIL) illumination. In addition to warning lights, drivers might experience operational issues such as the "Vehicle does not accelerate properly" or an "Anti-Lock Brakes System (ABS) warning light on."

Fault Codes / DTCs

The presence of one or more of the following Diagnostic Trouble Codes (DTCs) is required to confirm this issue:

Code	Description
C170C-00	PBC (Event PBC Factory Mode)
C1436-86	Electric Parking Brake System Fail
C10D0	Electronic Park Brake System Failure

Cause

The root cause of the "Plant Mode Activated" condition and associated symptoms is a fault within the ABS Module. This module is also referred to as the BSM (ABS) Module in the service communication.

Important Warnings

It is crucial for owners to understand that this Rapid Service Update (RSU) 24-111, and consequently TSB 08-176-24, only applies to vehicles that are specifically listed on the RSU VIN list. If a vehicle is not on this list, even if it exhibits similar symptoms, this particular RSU does not apply.

Diagnosis

To determine if your vehicle is eligible for this repair, a technician must verify its VIN against the RSU VIN list, which can be accessed via VIP or a VIN search in DealerCONNECT/Service Library. If your VIN is on this list, the repair procedure should be performed. If a vehicle not on the RSU VIN list exhibits the described symptoms, further diagnosis may be required, but this specific TSB 08-176-24 repair will not be authorized under the RSU.

Repair Procedure Summary

The repair for the "Plant Mode Activated" issue primarily involves replacing the BSM (ABS) Module. Technicians will follow detailed service procedures found in DealerCONNECT under the service information category "3340A12 - Centralina Hidraulica e Eletronica Do Circuito A.B.S - Remocao / Recolocacao Ou Substituicao. Ciclo Completo (Inclui Sangria)." After the module replacement, any stored diagnostic trouble codes must be cleared from the vehicle's system.

Required Tools or Parts

Technicians will need a wiTECH diagnostic tool or an equivalent system to perform the necessary programming and diagnostics. The primary part to be replaced is the BSM (ABS) Module. Several part numbers are listed depending on the specific vehicle model and configuration, including:

• 68721636AA / 7096764 (for Renegade with TPMS 2)
• 68721644AA / 7096759 (for Compass MY23, MY24, MY25 PL8)
• 68721648AA / 7096760 (for Commander MY23, MY24 with ACC)
• 68721643AA / 7096761 (for Commander MY25 with ACC)
• 68721635AA / 7096762 (for Commander without ACC)
• 68721637AA / 7096765 (for Compass MY23, MY24, MY25 (not PL8))
• 68721641AA / 7096766 (for Rampage)

Additionally, Break Fluid (500ML), part number 68417931AA, is required for the procedure.

Owner Action

If you own a 2023-2025 Jeep Compass or Renegade and are experiencing a Malfunction Indicator Lamp (MIL) illumination, an "Anti-Lock Brakes System (ABS) warning light on," or the "Vehicle does not accelerate properly" symptom, especially if accompanied by a "Plant Mode Activated" message, you should contact your authorized Jeep dealer. The repair, which involves replacing the ABS Module under TSB 08-176-24, is reimbursable within the provisions of your vehicle's warranty.

---

Source: NHTSA ID: 11005723