Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2026 Toyota, Lexus, and Subaru Solterra vehicles equipped with a Panoramic View Monitor (PVM) system. Please see the recall report for a complete list of models. A software error may cause the rearview camera to freeze or display a blank screen when the vehicle is in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023-2024 Toyota Venza, 2023-2025 RAV4 Prime, RAV4, Highlander, GR Corolla, Crown, 2024-2025 Lexus TX, LS, Toyota Tacoma, Grand Highlander, and 2025 Lexus RX, Toyota Crown Signia, Camry, RAV 4 Plug-in Hybrid (PHEV), and 4 Runner vehicles. Due to an error in the instrument panel software at vehicle startup, the instrument panel may fail to display vehicle speed, brake system, and tire pressure warning lights.
Gulf States Toyota, Inc. (GST) is recalling certain Toyota 2023 GR Supra, 2024 4 Runner, Corolla, Grand Highlander, Grand Highlander Hybrid, Land Cruiser Hybrid, Tacoma, Tacoma Hybrid, 2023-2024 BZ4X, Corolla Cross Hybrid, GR Corolla, GR86, Highlander, Highlander Hybrid, Prius, Prius Prime, Sequoia Hybrid, Tundra, Tundra Hybrid, Venza Hybrid, 2023-2025 Crown, and 2025 Camry Hybrid vehicles equipped with GST accessories. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
After coming to a stop at a STOP sign, the vehicle accelerated unintentionally, crossing the highway and hitting a parked car, causing injuries and totaling my vehicle. While my vehicle sustained a crumbled chassis, no airbags were deployed, causing injuries to the driver and passenger. Additionally, the emergency automatic brakes did not stop the car from ploughing into the parked car. The car was examined by the insurance carrier (AAA) and Toyota (the manufacturer), who sent out a technician to read the CDR data. The report was generated by BOSCH (a 3rd party hired by Toyota). The report generated by BOSCH claimed the accelerator was fully engaged at 100% and brakes were applied only 0.85s prior to the impact. This was the first such event; no prior warning lights/signals were reported on the dash. This was a new car purchased from the dealership with no prior accidents or incidents.
Parked at work as usual on 8/17/2026 in the morning and in the afternoon when i was ready to go home, i noticed the windshield was chipped closed to the bottom. The chip itself is quite tiny and doesn’t look like it was hit by an object. The crack link goes upwards and turns towards the passenger side. The weather has been very hot in the past several weeks.
No injuries · No fire · No crash
The radio display intermittently goes black
No injuries · No fire · No crash
The contact owns a 2024 Toyota Venza. The contact stated that upon parking the vehicle, the vehicle unintendedly accelerated to 15 MPH, and the contact continued to depress the brake pedal. The vehicle came to a complete stop after crashing into the base of a light pole and a retaining wall. The front passenger’s side of the vehicle was damaged. The air bags failed to deploy. The contact was not injured. The vehicle was not towed. The message "BRAKES" was displayed. A Police report was not filed. The local dealer was contacted; however, the vehicle was not diagnosed. The VIN was not included in a recall. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 14,500.
What component or system failed or malfunctioned, and is it available for inspection upon request? I purchased four tires from Belle Tires on April 1, 2026, 14 days ago (note: mileage at accident 10,776 vs mileage at tire purchase 10,360 or 416 miles of wear). On Wednesday, April 15th, I was about to change lanes after entering the Tri-State Expressway (route 294) going southbound from Half-Day Rd. (route 22), I had crossed the first two lanes without incident, and moving into the third lane, when I experienced a blowout of my driver’s-side rear tire. The car started a fishtail counter-clockwise spin and crossed the third and the fourth lanes (i.e., the far left lanes) before smashing into the concrete median, separating my Southbound lanes from the opposing traffic lanes. I have kept both the tire and rim in my garage. How was your safety or the safety of others put at risk? As I started sliding or spinning, I cannot honestly say, whether or not I hit the brakes or can really describe the spinning that occurred. As the rim of blowout tire was evenly torn up on its outer edge, I know that the tire was turning. All I can recall is hearing the car hit the concrete median twice. I know that it had to be counterclockwise since I started going southbound, and after the car came to a rest next to the median, I was facing southbound again. Has the problem been reproduced or confirmed by a dealer or independent service center? I took the tire on it’s rim to the Belle dealer who would not acknowledge a blowout, but he kept insisting that he is not an expert on crash interpretations. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? Allstate Insurance, Toyota used a Bosch representative to retrieve the Electronic Data Recording (EDR) information. I have copy of this report available for expert interpretation. No warnings were given prior to this blowout.