Jeep Wrangler Complaints (2024)

970 consumer complaints on file.

#11693081October 13, 2025
POWER TRAIN, ELECTRICAL SYSTEM
Did a OTA UConnect update that showed up Sat am 10/11/25 - CEL came on along with a wrench icon - Jeep experienced a total loss of power. Instrument display showed car was off and i coasted to a stop. was able to drop at dealer Saturday. tech at dealership indicated i was the 3rd one that morning and said another local dealer had 5 issues that morning. A check of the internet intimates there are anecdotally hundreds of affected Jeeps.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693079October 13, 2025
UNKNOWN OR OTHER
The jeep would shut off while driving. Lights in dash flash and beep and a message is displayed to put car in park to start while the vehicle is off but coasting.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693075October 13, 2025
ELECTRICAL SYSTEM, ENGINE
The Jeep turns off at random times that I have to coast to a stop, put it in park, and then try and restart it again. That’s dangerous going down a highway and the Jeep to completely lose power and shut off or going through an intersection and having the Jeep shut off.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693074October 13, 2025
ENGINE, FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL, FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
The incident happened between October 10 and 13, 2025. Updating the Jeep Uconnect and software. It was a long weekend for me, so I decided to take my family, my wife, and two kids to the sand dunes at Pismo Beach. Luckily, I tried to avoid updating on Friday night because of a Facebook post from other Jeep Wrangler owners from 2024. A long weekend of supposed fun and activities turned into a nightmare Sunday afternoon when it updated over the air through Uconnect. Every 7 to 10 minutes of driving, the Jeep began to stall. It's okay now that it's October 13, 2025, Monday, but a long weekend of fun turned into a scary and nerve-racking situation, so I had to use another car to move on and do errands.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693071October 13, 2025
ELECTRICAL SYSTEM, ENGINE, VEHICLE SPEED CONTROL
Jeep lunched an OTA update on Friday October 10, 2025 in the afternoon (Los Angeles time area). I did the update when I came home and the next day when I started driving the car it abruptly stopped, signals were blinking including the engine system one and it was stating that I was experiencing an electric issue. It was also asking me to put the car in parking mode and I needed to shut off and restart the car to gain power again but it was stopping really quickly after again. I also have videos that I could not upload here if necessary to show exaclty what is happening.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693068October 13, 2025
ENGINE, POWER TRAIN, VEHICLE SPEED CONTROL
Driving my JEEP on [XXX] and while attempting to turn at a busy intersection in Colonia, NJ the JEEP stopped while flashing the check engine light and put in park message. Both kids were in the JEEP which needless to say made the situation even more dangerous. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693067October 13, 2025
VEHICLE SPEED CONTROL, ELECTRICAL SYSTEM, ENGINE
As I was driving on the local road, the speed dropped to 0 mph and could not accelerate. The jeep shuts down in the middle of road. Put it back in the Park mode, restart, all lights including engine lights were ON. Drove another 100 ft and stop again and repeat the whole process. I was luckily within 2 miles of my home and was able to drag this back to home in 20 minutes with 5-7 stops. The other cars were honking and flashing as I keep stopping every 200 ft with no warning. Not sure if this is software issue as a lot of people are posting on facebook and other Jeep forums of having same problem between Friday 10/10/2025 and now. I towed the car back to the dealership on 10/13/25 and have no vehicle to drive for now.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693065October 13, 2025
POWER TRAIN, ENGINE, ELECTRICAL SYSTEM
other the air update on 10/10/2025 resulted in forced stalling of vehicle while in motion
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693060October 13, 2025
ELECTRICAL SYSTEM, POWER TRAIN, ENGINE
The car stalled completely (‘Bricked’) while driving at approx 30mph. Everything cut off, power, steering, braked and the vehicle came to a stop in the road. I put the car in park and restarted it but the engine light has been on ever since. I took it to Jeep who told me to keep driving it unless it got worse and to call back in two days as they had a garage full of jeeps with the same problem.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693056October 13, 2025
ELECTRICAL SYSTEM, ENGINE, POWER TRAIN
A recent computer upgrade was requested via the jeep computer system and initiated. The next day, while driving, the jeep kept losing power and the engine shut off multiple times. The check engine light went on after the loss of power but not before. There were no symptoms prior to the malfunction nor prior to the update that was initiated the night before. This was especially dangerous while highway driving. The jeep was brought to the dealership service department. The dealership service department stated they can not touch the jeep for this item until a fix is initiated by Stellantis.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693048October 13, 2025
ELECTRICAL SYSTEM, SERVICE BRAKES, ENGINE
I was driving the jeep in my neighborhood when the dashboard flickered and it told me to put the vehicle in park and press the "start" button (same message it would give when you get in the car and get ready to start it, except it was already running and I was driving). Vehicle seemed to lose some power assist features like steering. I wasn't going fast, so it was hard to tell exactly what switched off, but the brakes felt stiff as well. I was able to stop the Jeep, turned it off, and then back on... which *seemed* to resolve the issue but then I had a check engine light on. I have a small diagnostic tool so I plugged it in and it give me 3 codes about control modules experiencing an "improper wake up" (whatever that means). Thankful I was not on the interstate at highway speeds or it could have been very dangerous.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693043October 13, 2025
FUEL/PROPULSION SYSTEM, POWER TRAIN, UNKNOWN OR OTHER
While driving the vehicle shut down unexpectedly. This occurred in the first minutes of driving after a software update the night before. I restarted the vehicle and vehicle and it shut down 4 more times in 1 mile of driving.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693041October 13, 2025
ELECTRICAL SYSTEM, STEERING
Check engine light went on while D on shifter simultaneously began flashing. Car lost power and steering locked.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693038October 13, 2025
ELECTRICAL SYSTEM, UNKNOWN OR OTHER
Vehicle lost acceleration and power while driving on my way to work. I was able to restart the Jeep and get it off the road. I was able to pull the OBD codes from the Jeep; P1E1D. I then remembered the last time I drove the Jeep, it prompted for a uconnect update (OTA). This morning was the first time driving it since that update.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693037October 13, 2025
ELECTRICAL SYSTEM, ENGINE
Loss of motive power. During normal operation, the vehicle suddenly loses a drive power and prompts user to shift into park and push the break before ignition. To reset, I had to stop the vehicle, shift into park and restart. This behavior repeated 4-5 times in an 2 mile trip. The dangerously degraded performance described above was preceded by an OTA software update on 10/11/2025.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693035October 13, 2025
ENGINE, ELECTRICAL SYSTEM, POWER TRAIN
The car updated with the latest uConnect on Friday night. The next morning car drove fine for about .5 miles, the drive gear selector on the screen started to flash with no power to the car. The car had stopped accelerating in heavy traffic with no where to pull over on the side of the road. Performed same issues 3 times, after the third time the car went into limp mode. Had to be towed to dealer, it is currently in service on limp mode with no next steps
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693033October 13, 2025
ENGINE, POWER TRAIN
11-Oct-2025 - Made it about 1/2 Mile on eSave mode @ about 5-6pm. Engine shut down and lost all power going approximately 40mph of Dr. Braley Road in Freetown. Controlled vehicle until it stopper at the stop sign at the corner of Roundsville road and put the car in park and restarted the engine. With eSave mode made it about 1/4 of a mile back towards home before it started again and had to repeat the process of stopping putting the car in park and restarting. Used electric mode to get home. 12-Oct-2025 - Attempted again on Sunday and got about 1/4 of a mile before the problem happened again. Service Electronic Stability Control message popped up this time along with e-Save Mode Temporarily Unavailable, followed by Electric Mode Temporarily Unavailable. Limped home again as the car would not go over 15 MPH with it floored.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693032October 13, 2025
UNKNOWN OR OTHER
Received over OTA UPDATE ON FRIDAY October 10th and Saturday the car was not drivable.. the car would start but shut off and lose power and the message was To shift into park and restart car.. this happened several times till I was able to drive the less than a mile to get home..thankfully this happened very close to my as there was no warning... and because the car just shut off if I was on a highway this would have caused an accident..
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693026October 13, 2025
ENGINE
This morning my 2024 Jeep Wrangler 4xe check engine light came on and had a loss of power. I had to pull over onto a highway to restart the vehicle. The dealership stated that there was an over the air update that was faulty and that they had no way to fix it, but they stated to bring it into the dealership service department even though vehicle is currently not drivable or unsafe to operate.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11693022October 13, 2025
ELECTRICAL SYSTEM, ENGINE, FUEL/PROPULSION SYSTEM
When driving at full speed vehicle shuts off and says to put into park. You cannot accelerate. Warning lights come on saying Antilock system failure, Hybrid system issues along with many other lights. You can be going 70 and it just turns off. We were driving from Sandusky Ohio home to Indiana and this happened. Our safety was put at risk fue to being on highways and out of nowhere our vehicle would lose acceleration and you would have to pull over and restart the car.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0

← Back to Jeep Wrangler