Freightliner · Model Report
Showing safety data for the 2019 model year only.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2022 Freightliner 114SD vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC).
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2022 Freightliner Business Class M2, and 2022 Freightliner 114SD, and 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2021-2022 Western Star 57X vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during an Adaptive Cruise Control (ACC) braking event.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Cascadia P4 vehicles. The brake lights may remain illuminated after the brake pedal has been released.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2019 Freightliner Classic Cascadia and 2019-2021 Freightliner Cascadia trucks. The drag link taper joint may not have been tightened sufficiently and could come loose, resulting in a complete separation of the drag link from the steering arm.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2019-2022 Freightliner Cascadia P4, 2021 Western Star WH126, 2020 Western Star WJ121, and 2021-2022 Western Star 49X vehicles. The battery cable terminal may break, resulting in a loss of electrical power and unintended engine stall.
I am purchasing this vehicle from a fleet sales in Pa and the left cab shock and 4 rear shock absorbers on the rear suspension I believe are severely compromised and I'm being told that they are unsure if these items are listed under DOT inspection and I am asking to have them replaced upon my purchasing of the vehicle. Will these severely rusted and damaged components passed a federal DOT inspection? I also see that they failed to have the recall repaired. Schneider Truck Sales in Harrisburg, PA is whom I am trying to purchase this vehicle from and I expressed to them that I believe these items should be replaced and repaired.
No injuries · No fire · No crash
I am writing to bring to your attention a potentially dangerous situation caused by what I believe to be a manufacturer design flaw with the SS 1034797 M2, 108SD, 114SD Coolant Level Sensor P/N 06-93316-002. On [XXX], one of our trucks (VIN: [XXX]) experienced a low coolant warning and an automatic engine shutdown while traveling on the interstate in a construction zone. As you can imagine, the sudden stoppage of a tractor-trailer in the traffic lanes of a freeway presents an extremely hazardous situation, not only for our driver but for all motorists in the vicinity. For us as a motor carrier, this is compounded by the likelihood of legal liability resulting from any collision involving a stationary truck in such conditions. The root cause of this incident appears to be the failure of the magnet within the surge tank to maintain its buoyancy. When the magnet sinks to the bottom of the tank, it signals the engine control module (ECM) that the coolant level is critically low, triggering an engine shutdown. While I understand the intent is to protect the engine from potential damage, this design flaw creates an unacceptably dangerous scenario—especially since, in many cases, the engine is not actually at risk of damage. In this instance, I instructed the driver to unplug and after a 15-minute period, he restarted the truck and drove to a nearby truck stop. Remarkably, the truck remains operational without the sensor repair, further underscoring the superficial nature of this issue. Unfortunately, this is not an isolated incident. We have encountered similar sensor failures across our fleet, but this particular event was the most severe. While I am not an engineer, it seems logical that the coolant level sensor should be paired with a high-temperature reading before an engine shutdown is initiated. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
No injuries · No fire · No crash
While approaching an overpass the collision mitigation system activated my brakes nearly causing the vehicle behind me to rear end my trailer, hit my brakes so hard i was thrown forward.
No injuries · No fire · No crash
My 2019 Freightliner Cascadia forward collision brakes activates automatically while on the road without any other vehicle nearby, airbrake malfunction (not released appropriately and fully released) and extremely fuel consumption.
No injuries · No fire · No crash
Truck will apply brakes when no objects or vehicles are around. It is very scary and unexpected when the system does this.
No injuries · No fire · No crash