Ford Focus Complaints

22,326 consumer complaints on file.

#11637599January 22, 2025
POWER TRAIN, ENGINE
The contact owns a 2015 Ford Focus. The contact stated while driving 50 MPH, the transmission was shuddering. The transmission fault and transmission overheating messages were displayed. The message to “Pull Over” was displayed. The vehicle was taken to the local dealer, where it was diagnosed and determined that the transmission control module needed to be replaced. The vehicle was repaired, but the failure recurred. The vehicle failed to start. Additionally, the vehicle failed to reverse. There was an abnormal burning odor detected. The vehicle was taken to another local dealer, Royal Oak Ford Service (27550 Woodward Ave, Royal Oak, MI 48067); where it was diagnosed and determined that the transmission control module needed to be replaced. The vehicle was repaired, but the failure recurred. The contact stated that while driving at an undisclosed speed, the transmission jumped out of gear. There was an abnormal burning odor detected. The transmission overheating message was displayed. The vehicle was towed to the same local dealer, where it was diagnosed and determined that clutch A and B had failed. The vehicle was repaired, but the failure persisted. While driving, the vehicle failed to properly shift into gear with the engine revving abnormally. The transmission overheating and fault message was displayed, and the vehicle failed to shift into gear. The vehicle was towed to the same local dealer, where it was diagnosed that the clutch assembly needed to be replaced. The manufacturer was contacted and referred the contact to the NHTSA Hotline. The failure mileage was approximately 40,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11637275January 21, 2025
ENGINE AND ENGINE COOLING
The contact owns a 2017 Ford Focus. The contact stated while driving at an undisclosed speed, the vehicle failed to accelerate as intended while depressing the accelerator pedal. The Check Engine Oil warning light was illuminated. The local dealer was contacted; however, the vehicle was not diagnosed or repaired due to the VIN not being under recall. The vehicle was towed to the residence. Upon further investigation, the contact related the failure to NHTSA Campaign Number: 23V905000 (Engine and Engine Cooling); however, the VIN was not included. The manufacturer was made aware of the failure. The failure mileage was approximately 107,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11637279January 21, 2025
STEERING
The contact owns a 2014 Ford Focus. The contact stated while driving approximately 35 MPH, the steering wheel became stiff. The contact stated that an unknown message was displayed. The vehicle was steered into a parking lot. The vehicle was towed to an independent mechanic where it was diagnosed and determined that the rack and pinion needed to be replaced. The vehicle was then towed to another independent mechanic where it was diagnosed that the rack and pinion needed to be replaced. The vehicle as not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 81,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11637314January 21, 2025
ENGINE AND ENGINE COOLING
The contact owns a 2016 Ford Focus. The contact stated that upon starting the vehicle, there was heavy white smoke coming from the exhaust pipe. There was no warning light illuminated. The vehicle was taken to a dealer where a diagnostic test showed that there was coolant intrusion into the engine. The contact was informed that the engine needed to be replaced. The contact was given an estimate for the repair. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline to file a complaint. The vehicle was not repaired. The failure mileage was 96,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11637326January 21, 2025
POWER TRAIN
The contact owns a 2016 Ford Focus. The contact stated that after shifting the gear shifter out of park(P) to drive(D) and attempting to accelerate, the engine revved up, but the vehicle failed to exceed 1 MPH. The contact shifted into reverse(R), but the vehicle failed to move. The vehicle was towed to the residence and then was later towed to AAMCO, where the mechanic diagnosed the vehicle with transmission failure. The vehicle was not repaired at AAMCO and was towed to the dealer for assistance. The dealer diagnosed the vehicle with transmission failure. The contact was informed that the transmission needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was 133,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11637488January 21, 2025
ENGINE, FUEL/PROPULSION SYSTEM
Vehicle has difficulty starting after refuel. Vehicle stalls randomly to the point that is too much of a danger to drive. All of the symptoms correlate to recall (18S32) yet this particular vehicles vin was not listed in the list of recalled vehicles. The DTC's are as follows,P0420, P0456, P1450. Upon being serviced for the ford customer satisfaction program 24N07 it was noted by a service advisor that the replacement of a fuel tank and fuel pump was necessary which would be a reference to recall (18S32). However due to this vin not falling under recall (18S32) the service for a replacement fuel tank and fuel pump is not covered by warranty. Vehicle has erratic and innacurate fuel gauge indication. Vehicle stalled in the middle of traffic shortly after service was completed. Dealership has no clearance from Ford to address problem because 24N07 makes no mention of components that could be affected by faulty canister purge valve, unlike (18S32) and as such leaves this vehicle to be a hazard on the road.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11637138January 20, 2025
POWER TRAIN
When driving the car it shutters, jerks, loses power and accelerations, shakes. The transmission was replaces once and it is doing it again under 100k miles. It could easily cause an accident. Transmission also randomly says it is hot to stop. There is a customer safety extended warranty on the tcm for this specific car. From what I have seen there is a recall on transmission clutches for the 2014 Ford Focus SE just not my car apparently for the clutch. Ford wants me to take it to pay 250 to tell me if its covered under warranty recall but a transmission place already told me it was a faulty clutch they told me about the extended warranty. I have read this happened to hundreds of people. It is dangerous. How can I file a class action lawsuit, report to the better business bureau to be resolved or report to the proper place? Also not to long ago driving down the highway the doors just swung open door locks stopped working. There was a recall and got fixed but this car is a safety hazard and ford should care more about their product and customer safety. Is there anyone who has a 2014 Ford Focus with a clutch issue. I was told if its the TCM the car wont start I don't want to spend 250 to be told the clutch isn't under warranty. It is a ripoff. I know its not the TCM.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11636712January 18, 2025
FUEL/PROPULSION SYSTEM, POWER TRAIN
My vehicle has had 3 Evap Canister Valve Recall repairs since 2021, I purchased my 2018 Ford Focus Titanium brand new in January 2019. I have all receipts. I recently had the 3rd Evap canister valve repair January 15,2025. My vehicle had pending codes P144A and P1450 which would have prevented it from passing Texas Emmissions. My Vehicle has also had a Transmission Control Module Recall repair -TCM twice, once in 2022 and 2023. My car has had intermitten stalling in the middle of a intersection due to this recall putting me at risk for an accident. My vehicle currently has a pending code P2867 which is the TCM code. I have AAA tow truck history of my vehicle being towed to Classic Ford for these repeat repairs. I have taken my car to Classic Ford several times in Galveston, TX in which they have not successfully repaired these recalls. Which has turned into repeat repairs. Invoices to prove it. Cook Ford in Texas City recently repaired the 3rd Evap Canister Valve on January 15, 2025 in which they also found the faulty code for the Transmission Control Module. This is a serious concern.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11636443January 17, 2025
UNKNOWN OR OTHER
TCM transmission control module failed and im being told that my year isn't covered under a recall when other models are it left my family stranded untill I could limp my car home
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11636618January 17, 2025
ENGINE
The contact owns a 2017 Ford Focus. The contact stated while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The contact stated that the low oil pressure warning light was illuminated. The vehicle was towed to an independent mechanic where it was diagnosed with oil pump failure. The contact was informed that the oil pump needed to be replaced. The vehicle was not repaired. The dealer was made aware of the failure. The contact was informed that the repair was not covered under recall repair or special warranty programs. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 107,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11636655January 17, 2025
VEHICLE SPEED CONTROL, FUEL/PROPULSION SYSTEM
I was getting off of work to go home when I got on the main hwy my car just started to slow down and would not go over 10 mph and the speed limited on that hwy is 45 mph so I had to get off the road before I was hit from behind.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11636244January 16, 2025
POWER TRAIN
Engine light came on and couldn't do a reverse with 60k miles
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11636276January 16, 2025
ELECTRICAL SYSTEM
While driving my car started skipping from first to second gear and then lowering acceleration. When at a complete stop car would not accelerate and just revs through first and second gear making a pinging clicking sound. Brought to dealership to be told codes p0702 and code p0734 were reading. I've had the car one year and has been maintained. Before I got the diagnosis I drove to the dealership there was no lights on even though there was the issue and then right as I pulled in the transmission light check came on. This problem has been confirmed by Ford dealership from transmission and engine diagnostic. Not being able to accelerate at a green light put my safety at risk.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11636340January 16, 2025
POWER TRAIN
Slowed down to enter roundabout, when acceleration out of roundabout transmission shuddered, check engine light illuminated and failed to accelerate greater then 35 mph. When stopped transmission continued to shudder, and shifted awkwardly.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11636343January 16, 2025
POWER TRAIN
Automobile shudders horribly on first gear and shifting from first to second gear. Attempted repair, however in time the shuddering came back. Then downshifting to go up a steep incline transmission made grinding/ticking noise. Experienced too much anxiety driving, got rid of the car.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11636344January 16, 2025
POWER TRAIN
My transmission went out on me and I was stuck right in the middle on the highway. That puts everyone’s safety at risk. These Automatic transmission’s are faulty from factory and Ford is refusing to “FIX” them. They will only accept to update the TCM and that’s not a fix when it has internal problems. I did get a warning on the screen saying transmission malfunction and a check engine light.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11636052January 15, 2025
ENGINE AND ENGINE COOLING
The contact owns a 2016 Ford Focus. The contact stated that while his wife was driving on the expressway at approximately 70 MPH, the check engine warning light illuminated, and the vehicle lost motive power. The driver turned on the hazard lights. The contact stated that the failure was related to NHTSA Campaign Number: 23V905000 (Engine and Engine Cooling). The vehicle was taken to the local dealer, where it was diagnosed that the oil pump belt had failed. The vehicle was not repaired due to parts not being available. The manufacturer was contacted, opened a case, and referred the contact to the NHTSA Hotline. The failure mileage was approximately 102,987.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11636145January 15, 2025
ENGINE
Dear NHTSA Recall Division, I am writing to bring to your attention a safety and performance issue related to a potential defect in the EVAP canister purge valve of my 2017 ford focus, which may be linked to the previously issued recall for this component. The EVAP canister purge valve in my vehicle has become stuck in the open position, resulting in the engine burning an excessive amount of fuel. This has led to an overly rich fuel mixture, which has placed significant strain on the vehicle's catalytic converter. As a result, the converter is showing signs of damage, including clogging, rough idle, and potential stalling Given the severity of this issue, I am requesting that the NHTSA investigate the potential consequences of this defect and determine if the damage to the catalytic converter—stemming from the malfunctioning purge valve—should be addressed through an expanded recall. The defect appears to not only affect engine performance but could also present long-term risks to vehicle safety, including the possibility of unexpected stalling while driving. I respectfully ask for guidance on the appropriate steps to take in order to address this matter, including whether additional recalls or safety measures will be initiated to cover the catalytic converter damage caused by the faulty EVAP canister purge valve. Additionally, I would appreciate any further instructions on how to proceed with obtaining repairs or replacements for the defective parts. Thank you for your attention to this matter. I look forward to your response and assistance in ensuring the safety and performance of affected vehicles.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11636153January 15, 2025
ENGINE AND ENGINE COOLING
The contact owns a 2016 Ford Focus. The contact received notification of NHTSA Campaign Number: 23V905000 (ENGINE AND ENGINE COOLING); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at 30-50 MPH, the vehicle lost motive power, and the engine seized. The contact stated that the engine fault message was displayed. The vehicle was towed to an independent mechanic to be diagnosed; however, the contact then decided to tow the vehicle to the local dealer to be diagnosed. The vehicle was diagnosed with turbo module failure. The vehicle was repaired; however, the failure recurred twice. The manufacturer was made aware of the failure. The failure mileage was approximately 95,000. VIN tool confirms parts not available.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11635930January 14, 2025
POWER TRAIN
I have had the vehicle in the shop many times for tcm clutch and it is doing the heavy jerking again I believe the same issues are happening.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0

← Back to Ford Focus