Ford Bronco Complaints (2021)

230 consumer complaints on file.

#11736856May 10, 2026
POWER TRAIN
My drive shaft/coupling caught fire at the front transfer case. I was able to extinguish it safely. This is the same description as: NHTSA Recall No.: 26V236 Manufacturer Recall No.: 26S26 And the description “ Vehicle 1: 2021-2025 FORD BRONCO‘ includes my vehicle, however, my VIN/license plate number do not show this recall in effect.
Crash:
No
Fire:
Yes
Injuries:
0
Deaths:
0
#11735906May 5, 2026
UNKNOWN OR OTHER
Recall from last July not having a remedy to fix yet
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11735509May 4, 2026
ELECTRICAL SYSTEM, UNKNOWN OR OTHER
I am submitting a safety complaint regarding my Ford vehicle’s infotainment screen failure, which has been identified under a recall but currently has no available remedy or repair timeline. When the screen goes blank or becomes unresponsive, I lose access to critical safety features, including the rearview camera, which is federally required. This significantly increases the risk of accidents while reversing, especially in areas with pedestrians. The system also affects access to navigation, hands-free communication, and important vehicle alerts, forcing me to either drive without these features or become distracted trying to compensate. Although Ford has acknowledged this issue, there is no clear timeline for a fix, and no accommodations have been provided. I am expected to continue driving a vehicle that does not meet expected safety standards, which puts both myself and others at risk. I rely on my vehicle daily, including transporting passengers, and the lack of a functioning safety system is a serious concern. The absence of communication and support from Ford regarding a resolution is also concerning. I respectfully request that NHTSA investigate this issue and require Ford to provide a timely remedy or appropriate accommodations, such as a loaner vehicle or interim solution, to ensure driver and public safety while awaiting a permanent fix.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11733378April 23, 2026
ELECTRICAL SYSTEM, FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL
The digital gauge cluster where it shows sensitive information is a blacked out screen. I took it an automotive shop to investigate the issue. They ran a diagnositic and confirmed the screen is receiving power, fuses are good, but the screen is not powering up. I cannot view the digital speed, fuel gauge, mileage, access GOAT modes, view tire pressure, view oil life, and other critical data, etc. This first occured a few months ago and would randomly turn back on, but not the screen is black more than it is on. Luckily I am able to track the fuel gauge (miles to empty) on the infotainment screen.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11731872April 17, 2026
FUEL/PROPULSION SYSTEM, BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING, SEATS
3 separate safety-related components have failed on my 2021 Ford Bronco, all of which correspond to open federal safety recalls that remain unremedied: 1. Infotainment/APIM Module & Backup Camera System (Recall Campaign 26V124): my infotainment screen fails to turn on, particularly in high-temperature conditions. When this occurs, the rearview/backup camera is completely non-functional. The vehicle displays no image when in reverse gear, eliminating all camera-assisted visibility behind the vehicle. This directly matches the conditions described in Recall 26V124, issued March 4, 2026. No remedy has been provided. 2. Digital Instrument Cluster / Dashboard: my digital dashboard intermittently fails to illuminate at vehicle startup. This occurs randomly and without warning. When it fails, the driver cannot see critical safety information including current speed, fuel level, engine temperature, or any warning indicators. Video documentation of this failure exists. This component is available for inspection upon request. 3. Low Pressure Fuel Pump (Recall Campaign 25V455): my vehicle has stalled on multiple occasions while in motion. During stall events, all dashboard warning lights illuminate simultaneously. This is consistent with the fuel delivery failure described in Recall 25V455, issued July 8, 2025, which states the fuel pump can fail causing loss of fuel pressure and an engine stall while driving. No remedy has been provided since the recall was issued in July 2025 (~9 months ago). All components are available for inspection upon request. However, the authorized Ford dealership in the area has refused to accept the vehicle for service or inspection, citing parts unavailability. Engine stall while in motion. my vehicle has stalled multiple times while being driven. The driver works as a real estate agent and regularly transports clients in this vehicle. The engine has stalled with passengers present. A sudden engine stall while driving results in immediat
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11731407April 15, 2026
FUEL SYSTEM, GASOLINE, SEATS
The contact owns a 2021 Ford Bronco. The contact received notifications of NHTSA Campaign Numbers: 25V455000 (Fuel System, Gasoline) and 25V721000 (Seats); however, the parts to do the recall repairs were not yet available. The local dealer was contacted but the vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The manufacturer was made aware of the issue. The contact had not experienced a failure.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11728322March 31, 2026
SUSPENSION
See attached document for complaint.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11724615March 16, 2026
LANE DEPARTURE: BLIND SPOT DETECTION
My BLIS module on the passenger side does not work and I have a constant warning light displayed that there is a system malfunction. Under further investigation, this is a KNOWN design issue caused by the rear wiring harness that contains the BLIS sensor rubbing against components in the rear bumper. My vehicle has 31000 miles on it and is now out of warranty. Ford dealers are aware of this issue but claim it is not a recall and not under warranty. This is a safety issue.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11720785February 26, 2026
UNKNOWN OR OTHER
The instrument cluster cracked. Woke up one day and it was cracked. The crack is traveling through the important screens. Cord won’t do anything, but dozens have reported online.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11719526February 20, 2026
SERVICE BRAKES
Brake fault warning occurring continuously. Seems to be a wide issue with Broncos 2021-2025. The brakes become “squishy” and have to push them to the floor to stop.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11718771February 18, 2026
ENGINE
A Safety Recall was issued on the vehicle with no remedy. The recall was in reference to the Engine Intake Valves and stated; "The engine intake valves may crack and break, which could result in loss of motive power and increase the risk of a crash". It also stated, " Prior to losing motive power, an engine malfunction indicator lamp may illuminate in the cluster and the driver may notice that the vehicle is running rough". This issue was the result of Ford manufacturing using a material that had "hardness issues". This all came out prior to the vehicle reaching the end of its warranty mileage. A test was required on the engine at the dealership at which time, the technician determined there was no need to perform the "recall test" (confirmed by video sent to us). On or around Dec. 17th, while my wife was driving the vehicle and entering a gas station, the check engine light came on, and the vehicle began losing power. She parked and immediately contacted the Ford dealership. They advised her to not drive the vehicle and have it towed to the nearest dealership (She was in Pennsylvania picking up our daughter from college). It was determined by the dealership in Pa. that compression in a cylinder was down 5% and the vehicle needed a new engine. We had the vehicle towed back to Virginia and inspected by the dealership who services the vehicle. Parts of the engine were removed for visual inspection at which time a crack intake valve was found, confirming the engine was no good. Also, confirming the issue Ford had stated in its recall. All information and pictures were sent to Ford manufacturing for determination on fixing the problem. Ford has said they will not cover the total cost to make good on their recall because the vehicle was out of warranty (miles were exceeded). How are consumers protected from manufactures taking advantage of mileage? The SAFETY recall was issued long before the warranty ran out. What if my wife had crashed w/ our daughter?
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11715858February 5, 2026
LANE DEPARTURE: BLIND SPOT DETECTION, BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING
The wiring harness is rubbing against the bumper, causing it to wear and eventually cut through. This causes an error to my BSM/Cross Traffic alert. I have an extended warranty, but it doesn't cover it. This is a problem I have seen on the Bronco6G forums.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11714757February 1, 2026
FUEL/PROPULSION SYSTEM, ENGINE, POWER TRAIN
Component or system that failed or malfunctioned: The fuel delivery system, specifically the fuel pump, which is subject to an active safety recall. The recall states that fuel pump failure can result in loss of fuel pressure and flow, leading to engine stall. The vehicle is available for inspection upon request. How safety was put at risk: A sudden engine stall while driving would result in an immediate loss of propulsion and power, creating a significant risk of collision, particularly at highway speeds or in traffic. This creates a dangerous situation for the driver, passengers, and surrounding vehicles due to the inability to accelerate or maintain speed. Has the problem been reproduced or confirmed by a dealer or service center: The defect has been confirmed by the manufacturer through an official safety recall. At this time, there is no repair remedy available. The vehicle has not yet been repaired due to lack of an available fix. Has the vehicle or component been inspected: The vehicle has not yet been physically inspected for this specific failure because the recall remedy is not available. The defect has been acknowledged by the manufacturer as part of the active recall. Warning lamps, messages, or symptoms prior to failure: At this time, there is no warning indicating when or if the fuel pump may fail. The recall states the failure may occur without warning. No prior warning lamps or messages have reliably indicated when the failure could occur. Additional information: Due to the nature of this defect and the lack of an available repair, I no longer feel the vehicle is safe to operate. The uncertainty of a sudden engine stall has created ongoing safety concerns and financial hardship, as I am responsible for a vehicle that may fail without warning.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11712776January 22, 2026
ELECTRICAL SYSTEM
The contact owns a 2021 Ford Bronco. The contact stated that while driving at an undisclosed speed, the parking assist fault warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed with a failed wiring harness. The contact was informed that a wire from the wiring harness was burned. In addition, the contact was informed that if the wire continued burning it might start a fire. The vehicle was repaired. The contact was informed that the repair was not covered under warranty. The manufacturer was made aware of the failure, and a case was filed. The claim for the repair was denied. The failure mileage was approximately 28,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11712374January 21, 2026
FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL, LANE DEPARTURE: BLIND SPOT DETECTION, BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING
While driving I lost most/all ADAS system. I received several alerts that kept repopulating. No Cross Traffic working No Blind Sport working No Cruise Control No Forward Collision working No Lane Departure working I took the rear assembly by the taillight and rear bumper. The wires and electrical components are corroded. Koons Ford Annapolis Maryland is requiring $1520 parts and labor.. This is a major safety problem as it was not designed correctly. Many Bronco Owners are going through this..
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11712311January 21, 2026
ELECTRICAL SYSTEM, BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING, LANE DEPARTURE: BLIND SPOT DETECTION
I received an alert on the dash stating there was an issue with the blind spot monitoring/rear cross traffic system. It was erroring off and on for that entire drive. When I got home, I googled the issue and it appears it's a known issue with '21 and some early '22 broncos where they factory installed the blind spot module wiring harness too close to the rear bumper. Over time, the wires rub and eventually rub bare and corrode or short out. I went out to take a look and sure enough, I had rubbed through on the driver side (photo) and the passenger side was nearly rubbed through. I have an extended warranty and it's at the dealership today. This is a manufacturing defect and should be covered (even if out of warranty) in my opinion. We will see what kind of story the dealer can come up with to wiggle out of it being covered under warranty.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11711629January 17, 2026
ELECTRICAL SYSTEM, BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING
Bronco wire corrosion cross traffic refers to a known issue where wiring under the rear bumper, often for the blind spot/cross-traffic sensors, chafes, frays, and corrodes, causing system faults and failures, sometimes due to design flaws or environmental exposure to salt, requiring inspection and repair of the harness. This problem triggers error messages like "Cross Traffic System/Blind Spot System Fault" in the instrument cluster, impacting safety features, with potential fixes involving harness repair, protective sheathing, or sensor replacement. My car’s wiring was corroded due to this flaw and required a repair exceeding $1,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11707821December 30, 2025
SERVICE BRAKES
Brake Light issue: Red Brake Light appears when driving over 40 MPH. To fix issue Tube Vacuum had to be replaced. Part# MB3Z 2420 This seems to be an on going issue with 2021 Broncos.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11707156December 26, 2025
UNKNOWN OR OTHER
A serious safety recall advised in July of 2025 still has not been fixed.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11706745December 23, 2025
SUSPENSION
The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA Campaign Number: 25V025000 (Suspension); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at an undisclosed speed, the vehicle was bouncing. Additionally, the rear-end swayed while driving over a bump. The dealer was made aware of the failure but confirmed that parts were on backorder. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 40,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0

← Back to Ford Bronco