Dodge Dart Service Bulletins
521 manufacturer communications on file.
- December 19, 2015•Document ID: 10218132Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 1806215REVA
- Date Added:
- August 22, 2022
- Manufacturer:
- DODGE
SummaryDiagnostic And System Improvements.
Associated Products (1)Associated Documents - December 19, 2015•Document ID: 10215169Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM
- Mfr Comm. #:
- 1807615 REV A
- Date Added:
- July 5, 2022
- Manufacturer:
- DODGE
SummaryThis bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest
Associated Products (1)Associated Documents - December 19, 2015•Document ID: 10215166Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 1806215 REV A
- Date Added:
- July 5, 2022
- Manufacturer:
- DODGE
SummaryDiagnostic And System Improvements.
Associated Products (1)Associated Documents - December 19, 2015•Document ID: 10160055Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE; POWER TRAIN
- Mfr Comm. #:
- 18-076-15 REV A
- Date Added:
- May 20, 2019
- Manufacturer:
- DODGE
SummaryFlash: 2.4L Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? P0456 - Evap System Small Leak. ? P0133 - O2 Sensor 1/1 Slow Response (additional enhancements). ? P2610 - PCM Internal Engine Off Timer Performance. ? P1607 - PCM Internal Shutdown Timer Rationality. In addition, some customers may describe that the engine is overheating based on the engine oil temp gauge read out. Software improvements include: ? Improved ambient temperature sensor diagnostics during sunload. ? Disable misfire monitor when P0335 (Crankshaft Position Sensor Circuit) is present. ? Engine oil temperature gauge level recalibration to avoid the misperception of an engine overheating condition. NOTE: Reprogram the PCM if P0335 is present along with engine misfire DTCs.
Associated Products (1)Associated Documents - December 19, 2015•Document ID: 10074948Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-076-15 REV A
- Date Added:
- June 22, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - December 19, 2015•Document ID: 10074945Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-062-15 REV A
- Date Added:
- June 22, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - December 18, 2015•Document ID: 10218087Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 1800915REVG
- Date Added:
- August 22, 2022
- Manufacturer:
- DODGE
SummaryDrivability Improvements.
Associated Products (3)Associated Documents - December 18, 2015•Document ID: 10215121Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 1800915 REV G
- Date Added:
- July 5, 2022
- Manufacturer:
- DODGE
SummaryDrivability Improvements.
Associated Products (3)Associated Documents - December 18, 2015•Document ID: 10215117Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; ELECTRICAL SYSTEM:ADAS:HUD:SOFTWARE; POWER TRAIN:MANUAL TRANSMISSION
- Mfr Comm. #:
- 1800615 REV H
- Date Added:
- July 5, 2022
- Manufacturer:
- DODGE
SummaryPowertrain Diagnostic and System Improvements.
Associated Products (4)Associated Documents - December 18, 2015•Document ID: 10160052Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; POWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 18-006-15 REV H
- Date Added:
- May 20, 2019
- Manufacturer:
- DODGE
SummaryFlash: 2.4L Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) ? Improved vehicle acceleration. ? P0480 - Cooling Fan 1 Control Circuit/Open. ? P0456 - Evap System Small Leak. ? U0402 - Implausible Data Received From TCM. ? Engine Startup Flare and Idle Surge. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0441 - Evap Purge System Performance. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P050D - Cold Start Rough Idle. 2015 PF Vehicles with (Sales Codes ED6, ED8) ? P0133 - O2 Sensor 1/1 Slow Response. ? P0456 - Evap System Small Leak. ? Low Idle Speed After Cold Start between 14°F to 32°F (-10°C to 0°C). ? Cold Idle Surge With AC Engaged. ? Improve cabin warm up in cold weather, when the vehicle is in park or neutral and the temperature is between 10°F to 40°F (-12°C to 4.5°C). ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P050B - Cold Start Ignition Timing Performance. ? P050D - Cold Start Rough Idle. ? P061A - Level 2 Torque Performance. ? P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). 2013-2014 PF Vehicles (Sales Codes ED6)
Associated Products (4)Associated Documents - December 18, 2015•Document ID: 10160050Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; POWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 18-009-15 REV G
- Date Added:
- May 20, 2019
- Manufacturer:
- DODGE
SummaryFlash: 1.4L Drivability Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience one or more of the following symptoms and/or a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the Diagnostic Trouble Codes (DTCs) listed below: 2016 Dart ? Engine cranks as if it has no compression. ? Engine sounds like it is knocking at idle, noise goes away when off idle. ? P0141 - O2 Sensor 1/2 Heater Performance. 2015 Dart ? Engine cranks as if it has no compression. ? Engine sounds like it is knocking at idle, noise goes away when off idle. ? P0141 - O2 Sensor 1/2 Heater Performance. ? P1046 - Cylinder 1 Oil Supply Solenoid Valve Overcurrent. ? P1048 - Cylinder 2 Oil Supply Solenoid Valve Overcurrent. ? P104A - Cylinder 3 Oil Supply Solenoid Valve Overcurrent. ? P104C - Cylinder 4 Oil Supply Solenoid Valve Overcurrent. ? P1D73 - Active Grill Shutter (AGS) Performance. ? P113D - O2 Sensor 1/1 Slow Response. ? Engine bump sensation felt during moderate to heavy acceleration over 3,500 RPM. ? P061A - Level 2 torque performance set. ? Engine difficult to restart after cold or warm soak periods. ? Intermittent high coolant temp warning lamp illumination when using cruise control. Condition occurs in conjunction with the P061A DTC listed above. ? Poor A/C performance primarily during extended hot idle and/or low speed driving conditions. Applies to vehicles built with 1234YF refrigerant sales code XFC. ? Cold start difficulty below -10°C (14°F) ambient temperatures. Engine cranks fast and possibly does not start due to loss of crankshaft synchronization until key cycle is performed. (Vehicles built on or after August 23, 2014 (MDH 0823XX) and on or before June 16, 2015 (MDH 0616XX)). 2014 Dart ? P1046 - Cylinder 1 Oil Supply Solenoid Valve Overcurrent. ? P1048 - Cylind
Associated Products (3)Associated Documents - December 18, 2015•Document ID: 10074900Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-009-15 REV G
- Date Added:
- June 22, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (3)Associated Documents - December 18, 2015•Document ID: 10074394Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-006-15 REV. H
- Date Added:
- June 22, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (4)Associated Documents - December 16, 2015•Document ID: 10159998Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL:ACCELERATOR PEDAL; VEHICLE SPEED CONTROL
- Mfr Comm. #:
- 53034160A
- Date Added:
- May 20, 2019
- Manufacturer:
- JEEP
SummaryPart Description: Accelerator Pedal Issue Description: Vehicle has accelerator pedal fault code. Before replacing accelerator pedal, be sure to follow fault code diagnostic procedures in service manual. Make sure to check wiring and connectors. DTC P2299 is usually caused by a two footed driver and accelerator pedal should not be replaced for this fault.
Associated Products (58)2016 Chrysler 2002016 Chrysler 3002016 Chrysler 300C2016 Chrysler Pacifica2016 Chrysler Town and Country2016 Dodge Avenger2016 Dodge Challenger2016 Dodge Charger2016 Dodge Dart2016 Dodge Durango2016 Dodge Grand Caravan2016 Dodge Journey2016 Dodge Viper2016 Fiat 5002016 Fiat 500e2016 Fiat 500L2016 Fiat 500X2016 Jeep Cherokee2016 Jeep Compass2016 Jeep Grand Cherokee+ 38 moreAssociated Documents - December 15, 2015•Document ID: 10218149Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 1810615
- Date Added:
- August 22, 2022
- Manufacturer:
- DODGE
SummaryFlash: 2.0L Diagnostic And System Improvements.
Associated Products (1)Associated Documents - December 15, 2015•Document ID: 10215183Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 1810615
- Date Added:
- July 5, 2022
- Manufacturer:
- DODGE
SummaryFlash: 2.0L Diagnostic And System Improvements.
Associated Products (1)Associated Documents - December 15, 2015•Document ID: 10160045Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN; ENGINE
- Mfr Comm. #:
- 18-106-15
- Date Added:
- May 20, 2019
- Manufacturer:
- DODGE
SummaryFlash: 2.0L Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): ? P0456 - EVAP System Small Leak. ? P2610 - PCM Internal Engine Off Timer Performance. ? P1607 - PCM Internal Shutdown Timer Rationality. In addition to the above DTCs, this software release also includes an engine oil temperature gauge calibration enhancement.
Associated Products (1)Associated Documents - December 15, 2015•Document ID: 10074966Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-106-15
- Date Added:
- June 22, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - December 9, 2015•Document ID: 10159994Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 68234120A
- Date Added:
- May 20, 2019
- Manufacturer:
- DODGE
SummaryPart Description: Panasonic 8.4" CTP/FCTP Radio, Update Failure Issue Description: Issue 1; Radio inoperative, no power, display no power or screen is blank.~ Blank Screen with Audio: The ICS is a separate module from the radio. If attempting to replace the display (ICS), do not order a radio part number. Instead, order p/n Z5064993A$ for an exchange or 05064993A$ for a new part replacement.~ Issue 2.; During a Travel Link software update.....The radio locks up and displays "Software Missing" with a green screen. Please contact Nabil Issa at cell (248) 941-8720 or Dave Clemons at cell (248) 520-0419. IMPORTANT - Do not clear codes, perform a battery reset, or remove the radio before calling. Engineering is currently root causing this issue and your assistance is greatly appreciated. If unable to reach this person within 15 minutes, then proceed with the necessary repair. ~ Issue 3.; If the radio ICS/touchscreen display appears to reset intermittently, it turns white then black and functionality returns....Please contact Gaurav Saxena at cell (248) 260-0583 or Dave Clemons at cell (248) 520-0419. Engineering is currently root causing this issue and your assistance is greatly appreciated. If unable to reach this person within 15 minutes, then proceed with the necessary repair. NOTE: USB cables should be replaced prior to the HFM or Radio. ~
Associated Products (5)Associated Documents - December 9, 2015•Document ID: 10159990Service Bulletin/Repair InstructionsWHEELS; EQUIPMENT
- Mfr Comm. #:
- 06509898A
- Date Added:
- May 20, 2019
- Manufacturer:
- JEEP
SummaryPart Description: Nut - Front Hub & Bearing Issue Description: Whenever replacing the front Hub & Bearing Halfshaft Nut, make sure to torque to proper spec of 150 ft/lbs (200 Nm) and crimp according to procedure in TechConnect. (This torrque is higher than other platforms). Failure to do so will result in eventual Hub & Bearing failure (noise).~
Associated Products (4)Associated Documents