BMW X5 Service Bulletins
1,651 manufacturer communications on file.
- June 1, 2014•Document ID: 10148101Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 840314
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryiPhone: Connection Failures with iOS 7. There are various connectivity failures with the iPhone using iOS 7. Some examples are listed below: * Call disconnection * Contact List incomplete * General connection failures CAUSE Apple software iOS 7 and its variants.
Associated Products (215)Associated Documents - June 1, 2014•Document ID: 10148098Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- 651114
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryRecall Campaign 13V-564: E53 Repair Front Passenger Airbag Seat Occupancy Sensor Mat. This Recall involves the front passenger airbag OC3 (Front Passenger Seat Occupancy Sensor Mat) for the E53 (X5). Over time, due to the frequency of front passenger seat usage, the OC3 seat mat can become damaged. If this were to occur, deactivation of the front passenger airbag could result, increasing the risk of injury in the event of a crash. If the front passenger airbag became deactivated, the airbag warning lamp on the instrument cluster and the Passenger Airbag Status Lamp (POL) in the Roof Functions Center (FZD) are illuminated at the same time. OTHER AIRBAG-RELATED FAULTS AND REPAIRS The issue being addressed by this Recall may or may not be the root cause of a vehicle arriving at your center with the airbag (SRS) malfunction light illuminated. It is important to identify vehicles with the airbag (SRS) malfunction light illuminated during the repair order write-up process; this will allow you to review the scope of the Recall repair with the customer. It is also important to notify the customer that diagnosing other airbag-related system issues may be required and this diagnosis and corresponding repair work, if needed, is not covered by this Recall.
Associated Products (2)Associated Documents - June 1, 2014•Document ID: 10148095Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 330314
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryService Action/Delivery Stop: Rear Shock Absorber Guide Support. Some rear shock absorbers may have been assembled with the incorrect guide support. These incorrect guide supports will cause a rattling noise within a low mileage.
Associated Products (2)Associated Documents - June 1, 2014•Document ID: 10148094Service Bulletin/Repair InstructionsPOWER TRAIN:DRIVELINE:DRIVESHAFT
- Mfr Comm. #:
- 260114
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryService Action: Inspect Front Driveshaft. The universal joints in the front driveshaft may wear out prematurely.
Associated Products (1)Associated Documents - June 1, 2014•Document ID: 10056099Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; COMMUNICATION
- Mfr Comm. #:
- SIB-84-03-14
- Date Added:
- September 3, 2014
- Manufacturer:
- BMW
SummaryBMW: WHEN USING IPHONE, VARIOUS CONNECTIVITY FAILURES OCCUR, SUCH AS DISCONNECTION OF CALL, LIST OF CONTACTS INCOMPLETE, DUE TO THE VARIANTS AND SOFTWARE USED. MODEL 2008-2014.
Associated Products (30)Associated Documents - June 1, 2014•Document ID: 10056096Service Bulletin/Repair InstructionsAIR BAGS:FRONTAL
- Mfr Comm. #:
- SIB-65-11-14
- Date Added:
- September 3, 2014
- Manufacturer:
- BMW
SummaryBMW: PASSENGER AIRBAG WARNING LAMP WILL ILLUMINATE, IN INSTRUMENT CLUSTER, DUE TO FRONT PASSENGER AIRBAG BEING DEACTIVATED FROM FREQUENT FRONT PASSENGER USAGE AND DAMAGED TO SEAT MAT. MODEL 2005-2006 E53 (X5). *PE
Associated Products (2)Associated Documents - June 1, 2014•Document ID: 10056094Service Bulletin/Repair InstructionsSUSPENSION:REAR:SHOCK ABSORBER
- Mfr Comm. #:
- SIB-33-03-14
- Date Added:
- September 3, 2014
- Manufacturer:
- BMW
SummaryBMW: DUE TO GUIDE SUPPORTS BEING INCORRECT, THE REAR SHOCK ABSORBERS WERE ASSEMBLED, WHICH WITHIN A LOW MILEAGE CAUSES A RATTLING NOISE. MODEL F15 (X5). *PE
Associated Products (5)Associated Documents - May 1, 2014•Document ID: 10148336Service Bulletin/Repair InstructionsWHEELS; EQUIPMENT:OTHER:LABELS; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
- Mfr Comm. #:
- 710114
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryMService Action: Replace Wheel Bolt Wrench. The internal thread of the wheel bolt wrench is incorrect at M8. AFFECTED VEHICLES This Service Action involves F56 vehicles according to VIN selection. First check if a Service Action label with a code number 64 is already attached to the B-pillar. If a code number 64 has been punched out, the Campaign has already been performed and no further action is necessary. Vehicles which require this Service Action to be completed will show it as "Open" when checked either in the "Service Menu" of DCSnet (Dealer Communication System) or with the Key Reader.
Associated Products (2)Associated Documents - May 1, 2014•Document ID: 10148335Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:TURN SIGNAL; EXTERIOR LIGHTING:TURN SIGNAL:FLASHER UNIT
- Mfr Comm. #:
- 631013
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryOne or Both Outside Mirror Turn Signals Do Not Operate. When using the left or right turn signal, the turn signal light on the outside mirror does not operate. CAUSE The outside mirror light assembly has a pin pushed back and makes a bad contact.
Associated Products (2)Associated Documents - May 1, 2014•Document ID: 10148329Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ENGINE
- Mfr Comm. #:
- 610814
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryErroneous Check Control Message "Remote control missing. Unable to start" Is Displayed. With the engine running, the Start/Stop button is pressed and the engine stops. If the Start/Stop button is pressed again (without opening the door), and the customer has his/her foot on the brake pedal, the engine starts. An erroneous check control message "Remote control missing. Unable to start" is then displayed in the instrument cluster and Central Information Display (CID). Software error in the Body Domain Controller (BDC)
Associated Products (2)Associated Documents - May 1, 2014•Document ID: 10148324Service Bulletin/Repair InstructionsVISIBILITY:SUN/MOON ROOF ASSEMBLY; EQUIPMENT:MECHANICAL
- Mfr Comm. #:
- 540114
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryPanoramic Sunroof Does Not Open or Close. One or both of the following may occur: 1. The sunroof becomes stuck during operation. 2. The sunroof cannot be opened or closed. The panoramic sunroof rear glass mechanism fails. The drive cable plate is either broken or bent.
Associated Products (2)Associated Documents - May 1, 2014•Document ID: 10148319Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS
- Mfr Comm. #:
- 360214
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryErroneous Check Control Message: Tire Pressure Check Failed. After pressing the Start/Stop button, the Check Control message "Tire pressure check failed" appears briefly, as well as the corresponding light on the instrument cluster. These displays disappear after a few seconds. Software in the BDC (Body Domain Controller)
Associated Products (2)Associated Documents - May 1, 2014•Document ID: 10148318Service Bulletin/Repair InstructionsTIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 360211
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryTire Pressure Monitor System (TPMS) Functional Changes. INFORMATION There has been a disruption in the production and supply chain of certain electronic components. These events have influenced global manufacturing facilities, including the automotive sector. In order to fulfill customer demand and maintain production schedules, BMW has made a change to the Tire Pressure Monitor System of certain vehicles. https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16234.2.B360211.... 6/8/2014 Page 2 of 2 Although the basic system operation and function remain the same, changes have been made to the vehicle's display elements when a low tire pressure condition occurs. The following points apply to vehicles produced during the period listed above: * The Tire Pressure Monitor System continues to meet all federal requirements. * When a low tire pressure condition is detected, a general system warning is issued. The warning will be displayed in the instrument cluster (KOMBI) and/or Control Display, depending on the vehicle's equipment level (refer to the attachment). * When a driver is alerted to a low pressure condition, all four tires should be inspected for damage and proper inflation. The system components, wheel electronics and central antennae/module are fully compatible with current replacement parts. This functional change represents a running production change and is not a defect in materials or workmanship. Any further changes to the system function or components will be communicated in a future bulletin. It is imperative that all service personnel be familiar with these changes. WARRANTY INFORMATION Not applicable.
Associated Products (49)Associated Documents - May 1, 2014•Document ID: 10148317Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC)
- Mfr Comm. #:
- 340314
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryService Action: Program Control Units (Dynamic Stability Control [DSC] OBD error). Due to a software error stored in the DSC control unit, a fault code memory entry is permanently stored. This fault is not displayed, nor can it be cleared using the BMW diagnostic tools. The fault code memory entry has no functional effect on the DSC control unit. This fault code entry may result in failing the OBD test when using a scan tool.
Associated Products (2)Associated Documents - May 1, 2014•Document ID: 10148312Service Bulletin/Repair InstructionsSUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY:U-BOLT, LEAF SPRING TO AXLE; SUSPENSION:FRONT:WHEEL BEARING
- Mfr Comm. #:
- 310112
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryClicking Noise from Front Axle. Clicking noises are heard from the front axle area while maneuvering at low speeds (e.g., parking lot maneuvers). CAUSE Movement between the contact surfaces of the wheel bearing and swivel bearing (knuckle)
Associated Products (70)Associated Documents - May 1, 2014•Document ID: 10148308Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS
- Mfr Comm. #:
- 130712
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryN63 and S63 Engine: High-pressure Fuel Injector Replacement Procedures. The customer complains that one of the following scenarios has been encountered while operating the vehicle: * During a cold start in the morning, the engine runs very roughly and the Service Engine Soon lamp is illuminated. * During a hot start, the engine runs very roughly and the Service Engine Soon lamp is illuminated. While driving or idling, the engine will misfire and the Service Engine Soon lamp is illuminated. * Various misfire faults are stored in DME fault memory. CAUSE An internal failure of the high-pressure fuel injector can lead to incorrect operation.
Associated Products (82)Associated Documents - May 1, 2014•Document ID: 10055634Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:LABELS
- Mfr Comm. #:
- SIB-71-01-14
- Date Added:
- June 24, 2014
- Manufacturer:
- BMW
SummaryBMW: EMISSIONS LABELS CONTAIN INCORRECT INFORMATION CONCERNING THE MODEL YEAR. THEREFORE, THE LABEL MUST BE REPLACED. MODELS F15. MODEL YEAR 2014. *JS
Associated Products (1)Associated Documents - April 1, 2014•Document ID: 10148276Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- 650514
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryTraffic Information Is Inoperative. The traffic information is intermittently or permanently inoperative. * Traffic flow is not displayed on the navigation map. * The traffic list is empty. 1. The Offboard Availability (backend) system is unavailable and is not sending traffic information. 2. The traffic information feature is not activated correctly.
Associated Products (209)Associated Documents - April 1, 2014•Document ID: 10148274Service Bulletin/Repair InstructionsPARKING BRAKE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 612013
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
Summary"Service Action: Replace EMF Switch. An electrical malfunction in the EMF (Electromechanical Parking Brake) switch can cause an erroneous Check Control Message to be displayed. The parking brake functions properly. EMF switch hardware error AFFECTED VEHICLES This Service Action involves F01, F02 and F15 vehicles which were produced from June 2013 to October 2013. In order to determine whether a specific vehicle has had this Service Action completed or is affected by this Service Action, first check the B-pillar label for code number 658. If code number 658 has been punched out, the campaign has already been performed. If code number 658 has not been punched out, it will be necessary to utilize the ""Service Menu"" of DCSnet (Dealer Communication System) or the Key Reader. Based on the response of the system, either proceed with the corrective action or take no further action."
Associated Products (33)Associated Documents - April 1, 2014•Document ID: 10148273Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 610314
- Date Added:
- November 13, 2018
- Manufacturer:
- BMW
SummaryCheck Control Messages Related to Battery Charge During Cold Ambient Temperatures. On cold days with an outside ambient temperature of less than 15F, customers may notice a check control message related to the battery that is displayed on the instrument cluster and the control information display. Under these conditions, the vehicle starts. Various power management faults can be stored: * 213901 - Power management: Reduction or shutdown of individual electrical consumer * 8040BD - Reset or deactivation of Terminal 30F * 8040B9 - De-activation of terminal 30B: Top start capability limit reached * 8020E8 - Reset or deactivation of terminal 30F * 800E89 - FRM: start capability limit reached with lights active during stationary mode * 93076B - Deactivation of terminal 30B: upper start capability limit reached * 93076A - Deactivation of terminal 15: upper start capability limit reached, but deactivation preventer active * 93076C - Deactivation of terminal 30B: upper start capability limit reached, but deactivation preventer or legal loads active * 930769 - Deactivation of terminal 15: upper start capability limit reached Note: When the outside temperatures drop below 46F, the charging system is switch to full charge. CAUSE * The check control message (ID 229) is caused by a heavily discharged battery. * The check control message is triggered when the current state of charge (SoC) of the battery approaches the minimum SoC that is required to start the vehicle (start capability limit). * In low outside ambient temperatures, the start capability limit of the vehicle is higher. Therefore it takes more energy from the battery to start a cold engine. * Without the early warning of the check control message, the current state of charge would drop below the start capability limit and the vehicle would not start. * The vehicle's intelligent power management system actively takes measures to increase the charge of the battery, such as increasing idle speed and reducing or shutting
Associated Products (242)Associated Documents