BMW F 800 R Service Bulletins
417 manufacturer communications on file.
- May 1, 2019•Document ID: 10161578Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- B840214
- Date Added:
- June 24, 2019
- Manufacturer:
- BMW
SummaryINFORMATION New information provided by this revision is preceded by this symbol. This Service Information bulletin replaces SI B84 02 14 dated September 2018.
Associated Products (137)Associated Documents - May 1, 2019•Document ID: 10161554Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B121619
- Date Added:
- June 24, 2019
- Manufacturer:
- BMW
SummaryERRONEOUS ELECTRIC FAN FUNCTION FAULT STORED IN THE DME. The following faults may be erroneously stored in the Digital Motor Electronics (DME): And: There is no customer-facing vehicle symptom(s) or related check control message displayed. A software error may cause these faults to be erroneously stored in the Digital Motor Electronics (DME).
Associated Products (19)Associated Documents - April 1, 2019•Document ID: 10160271Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B620518
- Date Added:
- May 20, 2019
- Manufacturer:
- BMW
SummaryHEADS UP DISPLAY SPORADICALLY INOPERATIVE. Fault memory entry "B7F6E4 HUD: Fault in display backlighting "is stored in the instrument cluster. Intermittently the Head-Up Display (HUD) may deactivate.
Associated Products (20)Associated Documents - April 1, 2019•Document ID: 10160267Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD WIPER/WASHER
- Mfr Comm. #:
- B612315
- Date Added:
- May 20, 2019
- Manufacturer:
- BMW
SummaryThe Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full This Service Information bulletin supersedes SI B61 23 15 dated April 2016.
Associated Products (108)Associated Documents - April 1, 2019•Document ID: 10160259Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE
- Mfr Comm. #:
- B511419
- Date Added:
- May 20, 2019
- Manufacturer:
- BMW
SummaryKIDNEY GRILL(S) LOOSE. One or both kidney grills may be loose.
Associated Products (9)Associated Documents - April 1, 2019•Document ID: 10160258Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES:DOORS:LATCH
- Mfr Comm. #:
- B511319
- Date Added:
- May 20, 2019
- Manufacturer:
- BMW
SummaryDOOR LATCHING COMPLAINTS IN COLD WEATHER. Below freezing temperatures: One or more doors (front or rear) may not open or After opening they may not correctly latch. A leaking seal on the outer Bowden release cable may allow water to enter the cable sheathing and freeze.
Associated Products (17)Associated Documents - April 1, 2019•Document ID: 10160252Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; STEERING
- Mfr Comm. #:
- B170118
- Date Added:
- May 20, 2019
- Manufacturer:
- BMW
SummaryHEATER HOSE IS CONTACTING THE STEERING SHAFT This Service Information bulletin replaces SI B17 01 18 dated April 2018.
Associated Products (16)Associated Documents - April 1, 2019•Document ID: 10160251Service Bulletin/Repair InstructionsFUEL SYSTEM, DIESEL
- Mfr Comm. #:
- B161018
- Date Added:
- May 20, 2019
- Manufacturer:
- BMW
SummaryDIESEL ENGINE REDUCED POWER OUTPUT This Service Information bulletin replaces SI B16 10 18 dated November 2018.
Associated Products (2)Associated Documents - April 1, 2019•Document ID: 10160246Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- B110118
- Date Added:
- May 20, 2019
- Manufacturer:
- BMW
SummaryN63T - CCM "LOW OIL LEVEL" NOT DISPLAYED. Drivetrain Malfunction Warning is illuminated and DME fault code 1C4002 (Engine oil level: too low) is stored. Customer complains that Check Control Message (Low Oil level") has never been displayed. The engine oil level measurement test works correctly and shows low oil level when checked under Vehicle Status tab in CID. Instrument cluster software error.
Associated Products (39)Associated Documents - January 1, 2019•Document ID: 10153776Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B661918
- Date Added:
- February 25, 2019
- Manufacturer:
- BMW
SummaryFAULT CODE 804417 CAUSED BY THE REMOTE KEY. When a short test is performed as part of a workshop visit for an unrelated situation.
Associated Products (26)Associated Documents - December 1, 2018•Document ID: 10153709Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; EQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- B641218
- Date Added:
- February 25, 2019
- Manufacturer:
- BMW
SummaryHEATING IN EDRIVE IS NOT AVAILABLE. No heater output in eDrive mode.
Associated Products (14)Associated Documents - November 1, 2018•Document ID: 10152677Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- B661618
- Date Added:
- January 7, 2019
- Manufacturer:
- BMW
SummaryCOMFORT ACCESS AND PASSIVE GO DO NOT WORK AFTER REPLACING A REMOTE KEY. Note: This situation only affects the listed vehicles with a factory I-level lower than 18-03-XXX. After teaching in a new replacement radio remote key (aka radio-operated key), Comfort Access keyless entry and Passive Go (aka Convenience Starting) are no longer possible. However, it is possible to start the engine by holding the new key to the ring antenna at the right side of the steering column. CAUSE Software error in the remote key, and/or the Display Key where applicable.
Associated Products (16)Associated Documents - November 1, 2018•Document ID: 10152675Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- B660218
- Date Added:
- January 7, 2019
- Manufacturer:
- BMW
SummaryRADIO REMOTE SPORADICALLY INOPERATIVE. INFORMATION All required parts can be found in the Electronic Parts Catalog.
Associated Products (15)Associated Documents - November 1, 2018•Document ID: 10152670Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B520518
- Date Added:
- January 7, 2019
- Manufacturer:
- BMW
SummarySEAT MEMORY SWITCH SPORADICALLY NOT FUNCTIONING. Selecting one of the saved seat positions (via the memory seat position switch on the door panel), fails to work. A saved seat position cannot be retrieved. The memory function works again after a terminal change or backrest width adjustment. Note: Manual seat adjustment using the button for forward/back seat adjustment still works. Software error in the seat module.
Associated Products (18)Associated Documents - November 1, 2018•Document ID: 10152661Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B161018
- Date Added:
- January 7, 2019
- Manufacturer:
- BMW
SummaryDIESEL FAULTS FOR METERING QUANTITY (SCR03). The Malfunction Indicator Lamp (MIL) is illuminated and the following faults are stored in the Selective Catalyst Reduction (SCR03) Module * 805291 - Metering quantity deviation, metered quantity according to delivery volumes is too high. * 8052E3 - Metering quantity deviation, metered quantity too high, sum error. * 8052E5 - Metering interruption to diagnose a metering quantity deviation (metered quantity too high). A software calibration error in the SCR03 module.
Associated Products (7)Associated Documents - November 1, 2018•Document ID: 10152660Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- B160818
- Date Added:
- January 7, 2019
- Manufacturer:
- BMW
SummarySERVICE ACTION: CHECK AND, IF NECESSARY, REPLACE THE FUEL DELIVERY UNIT. The fuel delivery unit (in-tank fuel pump) may be the incorrect part installed for the Model/Market.
Associated Products (15)Associated Documents - November 1, 2018•Document ID: 10152657Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B111918
- Date Added:
- January 7, 2019
- Manufacturer:
- BMW
SummaryA Delivery Stop has been issued (effective November 16, 2018) on Model Year 2019 BMW 5 Series, 7 Series and X5 SAV vehicles that have been produced between June 29, 2018 ? September 10, 2018. The issue involves the oil-to-water heat exchanger which can start to leak. Approximately 285 vehicles are affected by this delivery stop.
Associated Products (15)Associated Documents - October 1, 2018•Document ID: 10149564Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- B110113
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryN63 AND N63T ENGINE: ENGINE OIL CONSUMPTION, ENGINE OIL TOP-UPS AND REFILL CAPACITY. Customers with one of the vehicles above may complain that the engine's oil consumption is "too high," resulting in engine oil top-ups and workshop visits to address the issue before the vehicle displays an engine oil service as being "due." When the vehicle's engine oil drops to the minimum level, a message will display in the vehicle advising the driver to "add 1 quart of engine oil." After topping up and continued operation, the "add engine oil" message may display again before an engine oil service is required and performed. CAUSE Engines that are fitted with a turbocharger, as part of their normal operation, will consume engine oil at a higher rate than a naturally aspirated engine (non-turbocharged engine). In this case, a "turbocharged" engine could require topping up of the engine oil more frequently.
Associated Products (107)Associated Documents - October 1, 2018•Document ID: 10149548Service Bulletin/Repair InstructionsAIR BAGS; ELECTRICAL SYSTEM; SEAT BELTS
- Mfr Comm. #:
- B720417
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryFALSE WARNINGS THAT THE FRONT PASSENGER SEAT IS OCCUPIED WITHOUT THE SEAT BELT BUCKLED. Acoustic and visual warnings indicate that the front passenger seat is occupied and the seat belt is not fastened, when the seat is actually unoccupied. If the situation is currently present, sit in the seat and move the seat to a different position then the POL (Passenger Occupancy Light) light will function correctly. In some cases the Air bag Warning Light was illuminated. Advanced Crash Safety Module (ACSM) fault "930A1C - Front passenger seat occupancy detection transmitting fault (moisture)" is stored. 1. Electronics (for example smart phones or laptops) are connected to the USB charging port or cigarette lighter and placed on the seat. 2. The seat was wet (e.g. very high humidity, spilled liquids or rain). 3. Faulty plug connection to Evaluation Electronics CIS (Capacitive Interior Sensing). 4. Excessive spacing between seat mat sensor signal wires and their grounding shield sleeve. * Drying the seat mat due to moisture. * If there is no moisture, secure loose cables and install 2 cable ties * If the 2 cables ties are already installed properly, replace the seat mat * Statement added to SI - do not replace the CIS electronics or the ACSM module for this siutation.
Associated Products (17)Associated Documents - October 1, 2018•Document ID: 10149487Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B170418
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryDELIVERY STOP. LOW TEMPERATURE COOLANT SYSTEM.A Delivery Stop has been issued (effective October 16, 2018) on Model Year 2019 BMW 5 and 7 Series vehicles that have been produced from September 13-14, 2018. There is a possibility that the affected vehicles do not have the correct amount of coolant in the low-temperature coolant system. Approximately 3 vehicles are affected by this delivery stop that have already been delivered to dealers. Affected vehicles show the campaign as ?Open? when checked either in Warranty Vehicle Inquiry, AIR or ISPA Next and identified with the description: STOP013433 B170418 Delivery Stop: Low Temperature Coolant System. The bulletin will be updated with more information when it becomes available.
Associated Products (15)Associated Documents