Bentley Flying Spur Service Bulletins
974 manufacturer communications on file.
- September 3, 2021•Document ID: 10201854Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2051511/6
- Date Added:
- October 5, 2021
- Manufacturer:
- BENTLEY
SummaryMood lighting. Customer statement / workshop findings: Mood lighting strip fixed on one colour regardless of which colour scheme is selected or not illuminated at all Technical background: Refer to the Measure section of this TPI.
Associated Products (2)Associated Documents - September 3, 2021•Document ID: 10201851Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2051187/6
- Date Added:
- October 5, 2021
- Manufacturer:
- BENTLEY
SummaryPoor Engine Running Complaints (Misfires) Petrol Engines Only. Customer statement / workshop findings: Poor engine running, reduced power, engine warning lamp illuminated. Technical background: Technical Product Information (TPI) to assist Retailers when diagnosing poor engine running or misfire. Measure: The following TPI should be carried out sequentially to ensure the root cause and analysis of the concern are identified without unnecessary work or repetitive actions taking place.
Associated Products (4)Associated Documents - September 3, 2021•Document ID: 10201809Service Bulletin/Repair InstructionsSTEERING; SUSPENSION
- Mfr Comm. #:
- 2056407/3
- Date Added:
- October 4, 2021
- Manufacturer:
- BENTLEY
SummaryRunning gear - Noise identification. Customer statement: Noise complaint from the suspension and/or steering Workshop findings: The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system
Associated Products (4)Associated Documents - August 30, 2021•Document ID: 10201162Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; SUSPENSION
- Mfr Comm. #:
- 2064338/1
- Date Added:
- September 8, 2021
- Manufacturer:
- BENTLEY
SummaryWarning light illuminated within the DIP - DTC C103711 - Evident within Address 74. Customer statement / workshop findings: Air suspension warning light within the DIP Workshop findings: The DTC shown below is evident within address 74 - C103711 - Right rear level control system sensor Short circuit to Ground Technical background: Previous instances have highlighted the following after inspection: - Broken wires - Kinked wiring - Loose Rear Right Height sensor G77connection - Defective Rear Right Height sensor G77 Measure: Conduct the following checks: - Rear Right Height sensor (G77) connection Visual and pull check - Referring to Figure 1 - Perform a wiring integrity check between sensor (G77) and J775
Associated Products (1)Associated Documents - August 30, 2021•Document ID: 10201161Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2062184/2
- Date Added:
- September 8, 2021
- Manufacturer:
- BENTLEY
SummaryElectronic Parking Brake (EPB) functionality issues. Customer statement / workshop findings: The following issues could be evident during PDI or found whilst in service - Electronic Parking Brake (EPB) found not operating to specification - EPB may not hold the car effectively - Parking brake components showing signs of wear - Parking brake warning light may also be evident within the DIP (See example shown in Figure 1). Measure: Carry out a full inspection of the (Electronic Parking Brake EPB) system including the following components: - Right and left hand (EPB) Actuators - Right and left hand rear brake shoes (EPB)
Associated Products (1)Associated Documents - August 30, 2021•Document ID: 10201078Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; SUSPENSION
- Mfr Comm. #:
- 2064358/1
- Date Added:
- September 4, 2021
- Manufacturer:
- BENTLEY
SummaryNew Continental GT, GTC, New Flying Spur - Air suspension Warning Lamp - Combination of DTCs evident within address 74. Customer statement: Air suspension warning lamp illuminated within the Driver Instrument Panel (DIP) Workshop findings: Combination or multiple DTCs see the examples shown below of current known faults. Technical background: Broken, damaged, dislodged and disconnected air suspension air spring connectors have been evident result in open circuit DTCs
Associated Products (2)Associated Documents - August 9, 2021•Document ID: 10201079Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 2064200/1
- Date Added:
- September 4, 2021
- Manufacturer:
- BENTLEY
SummaryBrake pedal - Groan/Creak noise can be heard during brake pedal operation. Customer statement / workshop findings: Groaning/creaking noise heard from the brake pedal during light application, in particular when the vehicle is at operating temperature. Technical background: Refer to the video on the Bentley Hub referencing TPI 2064200/- In the event the noise is the same as shown within the video, the operative should raise a non technical DISS query ensuring a clear video of the issue is attached, the operative should then carry out the instructions within the Measure section of this TPI.
Associated Products (1)Associated Documents - July 29, 2021•Document ID: 10200073Service Bulletin/Repair InstructionsTIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; WHEELS
- Mfr Comm. #:
- 2061999/1
- Date Added:
- August 7, 2021
- Manufacturer:
- BENTLEY
SummaryTyre Presssure Monitoring System - Transmitter replacement - 433 MHz (SC 21/25). Technical background Incorrect coding within the Tyre Pressure Monitoring System (TPMS) transmitters The incorrect coding prevents the TPMS control unit from determining the rotational direction of the transmitters Remedy Replacement of all four TPMS transmitters - Front left - Front right - Rear left - Rear right
Associated Products (3)Associated Documents - July 23, 2021•Document ID: 10200066Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2061536/2
- Date Added:
- August 7, 2021
- Manufacturer:
- BENTLEY
SummaryInfotainment screen stalls at Initialising. Customer statement / workshop findings Upon start-up of the Infotainment system, the home screen appears stuck in the Initialising procedure when this scenario is evident a spinning wheel is visible. Technical background: The issue occurs when the Infotainment system is shut down with the Home menu screen displayed. The Infotainment will start up on this screen the next time the vehicle is started A technical DISS query should be raised by the retailer to highlight the issue described is evident.
Associated Products (1)Associated Documents - July 23, 2021•Document ID: 10200064Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2061537/2
- Date Added:
- August 7, 2021
- Manufacturer:
- BENTLEY
SummaryInfotainment home screen - Loading messages visible on start up in multiple tiles. Customer statement / workshop findings: Upon start-up of the Home screen, loading messages can be seen in some or all of the tiles. Technical background: A delay when loading tiles is normal, this is due to the amount of external data that is required to load each individual tile, including multiple pages of external data that can be associated with each individual tile. Some tiles will naturally take longer to load than others. For example, APPS, NAVIGATION and MEDIA are likely to have a greater delay in loading than other tiles this is due to the amount of external data required to display the relevant information.
Associated Products (1)Associated Documents - July 15, 2021•Document ID: 10200068Service Bulletin/Repair InstructionsSUSPENSION; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2062259/2
- Date Added:
- August 7, 2021
- Manufacturer:
- BENTLEY
SummaryAir suspension warning light within the DIP - DTCs P089200 - C104707 - C103B13 - Evident within Address 74. Customer statement / workshop findings: Air suspension warning light within the DIP Workshop findings: One or a combination of the DTCs shown below are evident within address 74 - P089200 - Symptom Code 3145792 - TCM Power Relay Sense Circuit Intermittent (Level Control Valves Open Circuit) - C103B13 - 3145909 - Solenoid for level control system Open circuit - C104707 - 3211279 - Level control valves mechanical malfunction Technical background: Refer to the Measure section of this TPI.
Associated Products (1)Associated Documents - July 15, 2021•Document ID: 10200067Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 2061171/6
- Date Added:
- August 7, 2021
- Manufacturer:
- BENTLEY
SummaryNew Continental GT/GTC and New Flying Spur - V8 Kovomo - Fuel Pressure Regulation. Customer statement / workshop findings: Check Engine Lamp illuminated within the Driver Instrument Panel (DIP) with one or multiple DTCs as detailed below: - P310B00 Low Fuel Pressure Regulation with symptom code 2636 - P014800 Fuel Deliver Error - P019100 Fuel Rail pressure Sensor A Circuit Range/Performance - Misfire DTCs There may be multiple DTCs and symptoms present due to fuel pressure regulation or fuel supply issues Technical background: In the event the customer complaint relates to the following: - Customer experienced poor start up - proceed with the remaining instructions.
Associated Products (1)Associated Documents - July 15, 2021•Document ID: 10200063Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2063953/1
- Date Added:
- August 7, 2021
- Manufacturer:
- BENTLEY
SummaryACC Unavailable - Warning within the DIP - Numerous DTCs within address 003. Customer statement - ACC Unavailable - Warning within the DIP. Technical background In the event the symptom and one or more of the afore mentioned DTCs are evident, the operative should refer to the instructions within the Measure section of this TPI The DTCs refer to the Electronic stability control unit -J104-
Associated Products (1)Associated Documents - July 15, 2021•Document ID: 10200043Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2063954/1
- Date Added:
- August 6, 2021
- Manufacturer:
- BENTLEY
SummaryEngine warning light illuminated within the DIP during acceleration - DTC P029900 evident - W12 TSI only Customer statement: Engine warning light and max engine speed 4000 rpm warning evident within the DIP during acceleration - Warning on DIP first appears when accelerating (During boost) Workshop findings: DTC P029900 evident within the engine control unit/s Technical background: One of the turbochargers may not be achieving full boost, the issue can be related to a poor connection between the applicable boost pressure valve vacuum solenoid and the signal wire to the applicable Engine Control Module (ECM) leading to a lack of vacuum supplied to the waste- gate when under load In the event the afore mentioned symptoms are evident the operative should refer to the instructions within the Measure section of this TPI in conjunction with Rep.Gr 21 - Boost pressure valve vacuum solenoid (to assist identifying the component location)
Associated Products (2)Associated Documents - July 6, 2021•Document ID: 10200042Service Bulletin/Repair InstructionsFORWARD COLLISION AVOIDANCE; ELECTRICAL SYSTEM; STEERING
- Mfr Comm. #:
- 2063855/1
- Date Added:
- August 6, 2021
- Manufacturer:
- BENTLEY
SummaryDTC B17B801 - Steering Wheel Touch Recognition Control Module electrical error - evident within address 0019 Customer statement: Lane Assist and/or Traffic Assist are not functional Workshop findings: DTC - B17B801 - Steering Wheel Touch Recognition Control Module electrical error evident within address 0019
Associated Products (2)Associated Documents - July 1, 2021•Document ID: 10200070Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 2061171/5
- Date Added:
- August 7, 2021
- Manufacturer:
- BENTLEY
SummaryNew Continental GT/GTC and New Flying Spur - V8 Kovomo - Fuel Pressure Regulation. Customer statement / workshop findings: Check Engine Lamp illuminated within the Driver Instrument Panel (DIP) with one or multiple DTCs as detailed below: - P310B00 Low Fuel Pressure Regulation with symptom code 2636 - P014800 Fuel Deliver Error - P019100 Fuel Rail pressure Sensor A Circuit Range/Performance - Misfire DTCs There may be multiple DTCs and symptoms present due to fuel pressure regulation or fuel supply issues Technical background In the event the customer complaint relates to the following: - Customer experienced poor start up - proceed with the remaining instructions
Associated Products (1)Associated Documents - July 1, 2021•Document ID: 10200069Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2063678/1
- Date Added:
- August 7, 2021
- Manufacturer:
- BENTLEY
SummaryP245000 - EVAP System Switching Valve A Performance/Stuck Open DTC logged - V8 Kovomo. Customer Statement: Emission control system warning light illuminated within the DIP. Workshop findings: DTC P245000 - EVAP System Switching Valve A Performance/Stuck Open - With symptom code 11952 Technical background: Refer to the Measure section of this TPI
Associated Products (1)Associated Documents - July 1, 2021•Document ID: 10200039Service Bulletin/Repair InstructionsSTRUCTURE; LATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- 2061605/2
- Date Added:
- August 6, 2021
- Manufacturer:
- BENTLEY
SummaryDriver/Passenger door creak on close - 21 Model YearCustomer statement / workshop findings Driver or Passenger door creak during the Close function Technical background: VERY IMPORTANT: Refer to the vehicle repair history to check and confirm any previous work done regarding door latch replacement noting the following: - Only replace the door latch which is exhibiting the symptom Figure 1 shows and example of the door latch
Associated Products (1)Associated Documents - June 25, 2021•Document ID: 10198671Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EXTERIOR LIGHTING
- Mfr Comm. #:
- 2063777/1
- Date Added:
- July 2, 2021
- Manufacturer:
- BENTLEY
SummaryDTCs C119813 Low beam light bulb open circuit or C1198FA Low beam light bulb short circuit evident in D6 and/or D7. Customer statement: Headlamp low beam not functioning and/or warning within the DIP Workshop findings: DTCs C119813 Low beam light bulb open circuit active/static and/or C1198FA Low beam light bulb short circuit active/static logged within diagnostic address D6 (light control left) and/or D7 (light control right) Technical background The DTCs once triggered are unable to be cleared, with the DTCs logged the Headlamp low beam will not operate. In the event the symptoms are as described, conduct the instructions within the Measure section to completion noting the following: - The update to address D6 Must be done first followed by the update to address D7 - Regardless of the DTC which is evident or the address in which the DTC/DTCs are evident, both SVM codes MUST be applied
Associated Products (1)Associated Documents - June 17, 2021•Document ID: 10198717Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2063729/1
- Date Added:
- July 2, 2021
- Manufacturer:
- BENTLEY
SummaryFitment of control modules from donor vehicles for test purposes. Customer statement / workshop findings: Refer to the Technical background section before considering the fitment of control modules from donor vehicles for test purposes Technical background: If an issue is suspected for one of the control modules listed below: - Onboard supply control unit (J519) - Convenience system central control unit (J393) - Data bus diagnostics interface (J533) - Control unit 1 for Information Electronics (J794) - Control unit in dash panel insert (J285) - Emergency call module control unit (J949) The fitment of donor parts from another vehicle is not advisable and only possible if approved from Product Support via an open DISS query. The donor of parts should only be used as a temporary test VERY IMPORTANT: The ODIS replace routine MUST NOT be carried out under any circumstances
Associated Products (3)Associated Documents