Bentley Flying Spur Service Bulletins
974 manufacturer communications on file.
- October 21, 2020•Document ID: 10182323Service Bulletin/Repair InstructionsSTRUCTURE; ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- 2060645/2
- Date Added:
- November 6, 2020
- Manufacturer:
- BENTLEY
SummaryNew Flying Spur - Boot open/close function inoperative. Customer statement / workshop findings Boot operational issues for example: The boot does not open or close as expected. Technical background: VERY IMPORTANT: Please ensure all VIN applicable TPIs and VIN applicable Service Campaigns are checked and conducted prior to conducting the instructions within this TPI NOTE: The operative MUST submit the following information to a new DISS query or an existing query relating to boot operational issues Completed check list Images of the vehicle condition - In particular the boot area (Ensure license plate and VIN details are not visible) Video of the failure NOTE: Please capture the rear of the vehicle for at least one open/close operation (when possible) before zooming or moving in closer to the issue, the video MUST be recorded in a quiet environment Battery health - Print out of the results NOTE: Please ensure any other findings or issues relating to the boot are clearly described within the DISS query
Associated Products (1)Associated Documents - October 21, 2020•Document ID: 10182141Service Bulletin/Repair InstructionsSTRUCTURE; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 2051526/5
- Date Added:
- November 4, 2020
- Manufacturer:
- BENTLEY
SummaryRotating screen alignment. Customer statement / workshop findings: The chrome brightware strip on the veneer face fascia panel of the Bentley Rotating Display (BRD) may appear to be misaligned with the chrome strips on the passenger and drivers side fascia panels. In addition, the gapping and fit between the veneer face fascia panel of the BRD and the passenger and drivers side fascia panels may differ from one side to the other. Technical background: The chrome brightware strip is fixed to the veneer face fascia panel with no separate adjustment and as such can appear to be misaligned. The veneer face fascia panel relies on fixed location pins that may be out of tolerance. Rework the veneer face fascia panel to align the chrome brightware strip and/or the gapping between the BRD and the passenger and drivers side fascia panels.
Associated Products (1)Associated Documents - October 21, 2020•Document ID: 10182139Service Bulletin/Repair InstructionsSEAT BELTS; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; AIR BAGS: AIR BAG/RESTRAINT CONTROL MODULE
- Mfr Comm. #:
- 2052349/5
- Date Added:
- November 4, 2020
- Manufacturer:
- BENTLEY
SummaryFront seatbelt - Diagnostic Trouble Codes - B130474 and/or B130574. Customer statement / workshop findings Diagnostic Trouble Codes (DTCs) evident in Address: 0015 System name: 15 - Airbag Control Module B130474: Left front seat belt tensioner control module Actuator deviated B130574: Right front seat belt tensioner control module Actuator deviated The DTCs can be evident if the occupant uses a dummy seat belt buckle, the occupant may use the dummy seat belt buckle to prevent a warning light or audible warnings Technical background Dummy seat belt buckles of any description MUST NOT be used under any circumstances, Figure 1 shows an example of a dummy seat belt buckle
Associated Products (1)Associated Documents - October 21, 2020•Document ID: 10182089Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2051511/5
- Date Added:
- November 3, 2020
- Manufacturer:
- BENTLEY
SummaryMood lighting. Customer statement / workshop findings: Mood lighting strip fixed on one colour regardless of which colour scheme is selected or not illuminated at all. Technical background: Refer to the Measure section of this TPI
Associated Products (1)Associated Documents - October 21, 2020•Document ID: 10182069Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- 2051519/7
- Date Added:
- November 3, 2020
- Manufacturer:
- BENTLEY
SummaryHVAC operation issues/HVAC Motor defect DTCs logged. Customer statement/workshop findings: HVAC operation issue and HVAC motor defect (DTCs) evident within address 08 Climatronic control unit, the DTCs can be static or sporadic, for example: B108D09: Right temperature flap positioning motor - Component defect Technical background: The HVAC motor/s can become jammed causing HVAC operation issues.
Associated Products (2)Associated Documents - October 8, 2020•Document ID: 10182390Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 2058173/2
- Date Added:
- November 7, 2020
- Manufacturer:
- BENTLEY
SummaryElectrical switch replacement guidelines. Customer statement/workshop findings: Electrical switch suspected as defective This TPI is not applicable to suspected faulty control units or any component related to the passive restraint system in particular the airbag system Technical background: Prior to replacing an electrical switch refer to the Measure section of this TPI
Associated Products (2)Associated Documents - September 28, 2020•Document ID: 10180801Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:TV/RADIO/SPEAKERS; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2060823/1
- Date Added:
- October 6, 2020
- Manufacturer:
- BENTLEY
SummaryRadio: Reception complaints. Customer statement / workshop findings: All complaints which are related to radio reception issues Technical background: Complaints about the radio reception can have many causes. The radio reception strength/quality at the vehicle location can be an important issue. To process such complaints as effectively as possible it is important to precisely record the circumstances when a complaint occurs. The attached check list is available for this purpose. Please ensure the instructions within the Measure section are strictly adhered to
Associated Products (2)Associated Documents - August 3, 2020•Document ID: 10179439Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 2052785/5
- Date Added:
- September 5, 2020
- Manufacturer:
- BENTLEY
SummaryBrake noise identification. Customer statement: Noise complaint from the braking system. Workshop findings: The noise can be reproduced and clearly assigned to the braking system. Technical Background: Brake noises can be attributed to many causes. Eight of the most common causes are: 1. Brake discs or pads are close to their wear limit. 2. New brake pads and/or discs have not been properly bedded in after installation. 3. Aftermarket pads or discs are installed. 4. There is debris such as small stones, grit, road salt or sand between the brake disc and pad. 5. Discs are covered in rust. Rust can form when the vehicle has been stationary for long periods of time (Figure 1).
Associated Products (2)Associated Documents - July 8, 2020•Document ID: 10178034Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2028808/4
- Date Added:
- August 5, 2020
- Manufacturer:
- BENTLEY
SummaryEngine oil. Specific oil type and oil consumption reference. Customer statement / workshop findings: Engine oil level requires to:p up between services. Technical background The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering
Associated Products (2)Associated Documents - July 6, 2020•Document ID: 10178041Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2053177/11
- Date Added:
- August 6, 2020
- Manufacturer:
- BENTLEY
SummaryCustomer statement / workshop findings Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. All Vehicle Variants - Spurious DTC List Technical background The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted
Associated Products (2)Associated Documents - July 3, 2020•Document ID: 10178013Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 2056582/3
- Date Added:
- August 5, 2020
- Manufacturer:
- BENTLEY
SummaryInterior trim - Creak and rattle - Noise identification. Customer statement / workshop findings: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work
Associated Products (2)Associated Documents - July 2, 2020•Document ID: 10178031Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 2057841/2
- Date Added:
- August 5, 2020
- Manufacturer:
- BENTLEY
SummaryWindscreen replacement criteria whilst under manufacturers warranty. Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged
Associated Products (2)Associated Documents - May 4, 2020•Document ID: 10176130Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STRUCTURE
- Mfr Comm. #:
- 2058354/2
- Date Added:
- June 4, 2020
- Manufacturer:
- BENTLEY
SummaryNew Flying Spur - Flying "B" Mascot Condition: This Technical Product Information (TPI) Document is designed to give repair guidance and standardised fault reporting for Flying B functionality, poor finish and damage concerns.
Associated Products (1)Associated Documents - February 11, 2020•Document ID: 10171993Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; STRUCTURE
- Mfr Comm. #:
- 2058516/1
- Date Added:
- March 4, 2020
- Manufacturer:
- BENTLEY
SummaryTicking noise from the rear cabin area Customer statement / workshop findings: Ticking noise can be heard from inside the rear of the cabin when sitting in the rear seats Technical background: The noise can be heard when the engine is at operating temperature, after a drive cycle or an extended idle period, the noise is most evident with the armrest lowered with all electrical consumers switched off. The ticking noise occurs when the purge system is in operation, the vibrations emitted from the purge valve are then amplified through the fuel pipes to the rear of the vehicle. This is normal operation and no further investigation work is required as the vehicle is operating to specification. Production change
Associated Products (1)Associated Documents