Bentley Flying Spur Service Bulletins
974 manufacturer communications on file.
- October 4, 2021•Document ID: 10203240Service Bulletin/Repair InstructionsSEAT BELTS
- Mfr Comm. #:
- 2058411/4
- Date Added:
- November 6, 2021
- Manufacturer:
- BENTLEY
SummarySeat belt buckle stop button - Missing, Condition: Seat belt buckle stop button missing Technical Background: The seat belt buckle stop button should be evident as shown in Figure 1. Should the seatbelt be as shown in Figure 2 (Buckle stop button missing OR broken/loose) - Refer to the Measure section of this TPI
Associated Products (4)Associated Documents - October 4, 2021•Document ID: 10203239Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; SEAT BELTS
- Mfr Comm. #:
- 2052349/7
- Date Added:
- November 6, 2021
- Manufacturer:
- BENTLEY
SummaryFront seatbelt - Diagnostic Trouble Codes Condition: Diagnostic Trouble Codes (DTCs) evident in Address: 0015 System name: 15 - Airbag Control Module B130474: Left front seat belt tensioner control module Actuator deviated B130574: Right front seat belt tensioner control module Actuator deviated The DTCs can be evident if the occupant uses a dummy seat belt buckle, the occupant may use the dummy seat belt buckle to prevent a warning light or audible warnings Technical Background: Dummy seat belt buckles of any description MUST NOT be used under any circumstances, Figure 1 shows an example of a dummy seat belt buckle - B130474 and/or B130574
Associated Products (2)Associated Documents - October 4, 2021•Document ID: 10203225Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2053348/5
- Date Added:
- November 6, 2021
- Manufacturer:
- BENTLEY
SummaryW12 Engine management light on - Turbocharger speed sensor DTCs stored. Customer statement / workshop findings; - The engine management light is on. Workshop findings: The customer statement can be reproduced. Either of the following DTCs are stored in address 01 Engine Control Module 1 or address 11 Engine Control Module 2 - P257900: Turbocharger Speed Sensor A - Circuit Range/Performance Or - P259400: Turbocharger Speed Sensor B - Circuit Range/Performance Or - P259500: Turbocharger Speed Sensor B - Circuit low
Associated Products (2)Associated Documents - October 4, 2021•Document ID: 10203220Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 2064555/1
- Date Added:
- November 5, 2021
- Manufacturer:
- BENTLEY
SummaryUnusual air suspension behaviour when the vehicle is static. Customer statement / workshop findings Unusual air suspension behaviour when the vehicle is static for example: - Air suspension raising and lowering without request NOTE: Customer complaints regarding hard suspension when driving the vehicle may also be received Technical background. To confirm the issue is as described within the Customer statement refer to the video on the Bentley Hub referencing TPI 2064555/- In the event that the issue is as shown within the video the instructions within the Measure section should be followed
Associated Products (2)Associated Documents - October 4, 2021•Document ID: 10203207Service Bulletin/Repair InstructionsPOWER TRAIN; STRUCTURE
- Mfr Comm. #:
- 2064477/2
- Date Added:
- November 5, 2021
- Manufacturer:
- BENTLEY
SummaryKnock/clunk noise from the rear of the vehicle (Rear axle). Customer statement / workshop findings: Knock/clunking noise heard from the rear of the vehicle when changing direction at low speed Technical background: Ensure the fault is as described within the Customer statement Refer to the videos on the Bentley Hub referencing TPI 2064477/- In the event the knock/clunk is as shown within the videos the instructions within the Measure section should be followed noting the following: Video number 4 for TPI 2064477/- (on the Bentley Hub) specifically relates to the symptom described within step 3 of the Measure section (Heatshield in contact with the rear differential)
Associated Products (2)Associated Documents - October 4, 2021•Document ID: 10203042Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 2064582/1
- Date Added:
- November 5, 2021
- Manufacturer:
- BENTLEY
SummaryVehicle sitting low on one or more corners when static with no relevant DTCs stored. Customer statement / workshop findings - Vehicle sitting low on one or more corners when static - No relevant DTCs are evident Technical background: Refer to the Measure section of this TPI. Measure: 1) Confirm there are no DTCs indicating a fault with the air suspension system or associated systems 2) Refer to the instructions within TPI 2053492/- to confirm that no air leaks or issues relating to the air springs are evident.
Associated Products (4)Associated Documents - October 4, 2021•Document ID: 10203037Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; PARKING BRAKE; SERVICE BRAKES, ELECTRIC
- Mfr Comm. #:
- 2064519/1
- Date Added:
- November 5, 2021
- Manufacturer:
- BENTLEY
SummaryDTC's C10BCF6 - 160000 and/or C12E2F2 with symptom code 59744 stored in address 0003 - Parking brake warning in DIP. Customer statement: Parking brake warning light evident within the DIP (See example shown in Figure 1) Workshop findings: C10BCF6 - 160000 - Left parking brake motor Engine speed implausible OR C12E2F2 - 159744 - Right parking brake motor Engine speed implausible.
Associated Products (4)Associated Documents - October 4, 2021•Document ID: 10202973Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STRUCTURE; STRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- 2061605/3
- Date Added:
- November 4, 2021
- Manufacturer:
- BENTLEY
SummaryDriver/Passenger door creak on close. Customer statement / workshop findings: Driver or Passenger door creak during close Technical background: Ensure the fault is as described within the Customer statement, refer to the video on the Bentley Hub referencing TPI 2061605/- In the event the symptom is as shown the instructions within the Measure section should be followed.
Associated Products (2)Associated Documents - September 29, 2021•Document ID: 10202141Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; POWER TRAIN
- Mfr Comm. #:
- 2064350/1
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryTransmission control module update during PDI(SC21/34). Technical background: Software updates are available and should be applied to the following control unit: Transmission (address 02).
Associated Products (1)Associated Documents - September 15, 2021•Document ID: 10202119Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 2064477/1
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryCustomer statement / workshop findings: Knock/clunking noise heard from the rear of the vehicle when changing direction at low speed. Technical background Ensure the fault is as described within the Customer statement. Refer to the videos on the Bentley Hub referencing TPI2064477/-. In the event the knock/clunk is as shown within the videos the instructions within the Measure section should be followed.
Associated Products (2)Associated Documents - September 15, 2021•Document ID: 10202113Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EXTERIOR LIGHTING
- Mfr Comm. #:
- 2054599/8
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryCustomer statement / workshop findings: Headlamp operation issues Technical background: DTCs evident within the left light control unit (Diagnostic address D6) and/or the right light control unit (Diagnostic address D7) There are numerous static and intermittent DTCs which maybe evident within the previously mentioned control units, ensure all steps within the Measure section are strictly adhered to New Flying Spur (20 - 22 M/Y) and Bentayga (21 - 22 M/Y). In the event that DTCs C119813 Low beam light bulb open circuit or C1198FA Low beam light bulb short circuit are evident in D6 and/or D7. Please refer to and conduct the instructions within the following TPIs New Flying spur - TPI 2063777/- Bentayga applicable to 21 and 22 M/Y only - 2064497/-. For any other issues please refer to the instructions within the Measure section of this TPI.
Associated Products (4)Associated Documents - September 15, 2021•Document ID: 10202112Service Bulletin/Repair InstructionsLANE DEPARTURE; STEERING:STEERING CONTROL MODULE; ELECTRICAL SYSTEM; STEERING; EQUIPMENT ADAPTIVE/MOBILITY:VEHICLE CONTROLS:STEERING
- Mfr Comm. #:
- 2063855/2
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryCustomer statement: Lane Assist and/or Traffic Assist are not functional. Workshop findings: DTC-B17B801- Steering Wheel Touch Recognition Control Module evident within address 0019 And/or DTCB17B804 -Steering Wheel Touch Recognition Control Module electrical error- evident within address 0019 And/or DTC U112300 with symptom Code 1123220 within address 00A5. Technical background PLEASE NOTE: Should the affected vehicle be post the following listed VINs -Bentayga - SJAA514V3MC036546 -New Continental GT/C and New Flying Spur - SCBB15ZG1MC088177 The operative MUST raise a DISS query and await feedback before conducting any further work. For all vehicles up to and including the afore mentioned VINs the operative should conduct the instructions within the Measure section.
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10202144Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2055036/4
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryMy Bentley - Connected services. Customer statement / workshop findings: Complaints relating to My Bentley connected services. Technical background: Most queries and complaints regarding My Bentley connected services can be resolved by contacting My Bentley Support rather than raising a DISS technical query.
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10202103Service Bulletin/Repair InstructionsSEAT BELTS; ENGINE
- Mfr Comm. #:
- 2059489/2
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryNew Cont GT & GTC V8 - Start-Stop System Inhibit - Driver's Seat Belt Start/Stop system inhibit - Drivers seatbelt unfastened. Customer statement / workshop findings: The Start/Stop system functions with the drivers seat belt not fastened although the Owners handbook states that the drivers seat belt must be fastened for the Start/Stop system to function. Technical background On all 202 0model year vehicles specified with a V8 engine, the Start/Stop system will function with the drivers seat belt not fastened although the Owners handbook states the drivers seat belt must be fastened for the Start/Stop system to work, the system in this scenario is functioning correctly. Due to a change to one of the system inhibits, the 2021 model year Owners handbooks will be updated to confirm the Start/Stop system will work with the seat belt unfastened.
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10202099Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; LANE DEPARTURE: BLIND SPOT DETECTION; LANE DEPARTURE
- Mfr Comm. #:
- 2062884/3
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryNew Continental GT, GTC, New Flying Spur - Blind spot monitors not functional DTCC1114F3 logged in address 003C or 00CF. Customer statement: Blind spot monitors (Wing mirror illuminations) are not functional in conjunction with sporadic Bentley assist warnings present in the DIP. Workshop findings: Master or slave rear radars are not fitted correctly (unclipped or poorly installed). Diagnostic Trouble Code (DTC) C1114F3 - Lane change assistance control module restricted view, logged with address 003C or 00CF. Technical background: As per the Workshop findings section, the operative should review the Theory of operation chapter for the Rear radar. Production change: All VINs post SCBCX13S4MC086559 are to specification.
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10202086Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; SUSPENSION
- Mfr Comm. #:
- 2062873/2
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryNew Continental GT, GTC, New Flying Spur - Suspension Warning Lamp DTCs C134911 and/or C134B11 evident in address 74. Customer statement / workshop findings: Suspension warning lamp illuminated on Driver Instrument Panel (DIP) appeared when changing the Drive dynamics mode using the rotary switch on the front centre console: For example - When changing from Bentley to Sport mode. Diagnostic Trouble Codes (DTCs) C134911 and/or C134B11 Valve 1 for auxiliary volume 2Short circuit to Ground (GND) evident within address 0074. Technical background: The issue is a result of the incorrect operation of the front air spring damper (right and/or left) between the internal chambers 1 and 2.
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201986Service Bulletin/Repair InstructionsPARKING BRAKE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2063029/2
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryEPB fault warning within the DIP - DTCs stored in address 03 - C100C01 and C1246F9. Customer statement / workshop findings: EPB fault warning within the DIP with one or both DTCs as listed below: C100C01: Electro-mechanical parking brake button electrical error And/or C1246F9: Electromechanical parking brake Button interruption.
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201985Service Bulletin/Repair InstructionsSTRUCTURE; EQUIPMENT
- Mfr Comm. #:
- 2061343/2
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryRear center armrest lid - Poor magnetic retention. Customer statement / workshop findings: Rear center armrest lid has poor magnetic retention to the main armrest, this can lead to a crease in the leather. Technical background: Rear center armrest lid has poor magnetic retention to the main armrest.
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201977Service Bulletin/Repair InstructionsSTRUCTURE; LATCHES/LOCKS/LINKAGES; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2060645/3
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryNew Flying Spur - Boot open/close function inoperative Customer statement / workshop findings: Boot operational issues for example: - The boot does not open or close as expected Technical background: NOTE: The operative MUST submit the following information to a new DISS query or an existing query relating to boot operational issues - Completed check list - Images of the vehicle condition - In particular the boot area (Ensure license plate and VIN details are not visible) - Video of the failure NOTE: Please capture the rear of the vehicle for at least one open/close operation (when possible) before zooming or moving in closer to the issue, the video MUST be recorded in a quiet environment - Battery health - Print out of the results
Associated Products (2)Associated Documents - September 10, 2021•Document ID: 10201973Service Bulletin/Repair InstructionsEQUIPMENT; WHEELS; STEERING; SUSPENSION; SERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 2060446/5
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryClicking noise from the front wheels when conducting a static lock to lock steering manoeuvre Customer statement / workshop findings: Clicking noise from the front wheels whilst performing a static lock to lock steering manoeuvre Technical background: Verify that the customer complaint matches the video within the Bentley Hub Reference TPI Transaction number 2060446/- The operative MUST ensure that all similar symptom TPIs are checked to ensure the fault is exactly as described
Associated Products (2)Associated Documents