Bentley Bentayga Service Bulletins
847 manufacturer communications on file.
- October 28, 2021•Document ID: 10203034Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2064680/2
- Date Added:
- November 5, 2021
- Manufacturer:
- BENTLEY
SummaryCustomer statement: High voltage system warning within the DIP. Workshop findings: DTC P060600 with symptom code 29313 is evident within address 51 - Electric drive Control unit (DTC cannot be cleared). Technical background: DTC P060600 with symptom code 29313 relates to an Active discharge counter error within address 51 (DTC cannot be cleared) In the event the symptoms are as described, conduct the instructions within the Measure section to completion noting the following: IMPORTANT: There are separate SVM codes and MUST be strictly applied as instructed: -4V051SW01 (MUST BE APPLIED FIRST) -4V0EDU01 (MUST BE APPLIED SECOND)
Associated Products (2)Associated Documents - October 18, 2021•Document ID: 10203044Service Bulletin/Repair InstructionsSTRUCTURE; SUSPENSION
- Mfr Comm. #:
- 2064779/1
- Date Added:
- November 5, 2021
- Manufacturer:
- BENTLEY
SummaryCustomer statement: Creaking/squeak noise from the front suspension. Workshop findings: Defective upper inner lever bush. Technical background Verify that the customer complaint matches the sound file within the Bentley Hub Reference TPI Transaction number 2064779/-. The noise present in the sound file is caused by defective upper inner lever bush/bushes, the noise can appear in the following possible scenario. -When the vehicle is moved with steering input over uneven surfaces (for e.g. a ramp or speed bump). If the customer complaint occurs in any of the above circumstances and the noise can be clearly assigned to the noise within the sound file Refer to the instructions within the Measure section of this TPI. VERY IMPORTANT NOTE FOR HYBRID VEHICLES: -Hybrid vehicles use a High voltage system and MUST only be worked on by suitably qualified personnel. -Please ensure all guidelines within the repair manual are strictly followed before and whilst conducting any work on vehicles with a High voltage system
Associated Products (2)Associated Documents - October 18, 2021•Document ID: 10203041Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2064776/1
- Date Added:
- November 5, 2021
- Manufacturer:
- BENTLEY
SummaryCustomer statement / workshop findings -Engine misfiring -Engine running rough (not refined) -Engine misfire DTCs evident -Engine management light illuminated within the DIP -Knocking noise from the cylinder head (NOTE: The noise can be evident on either bank) IMPORTANT: The symptoms described are typically evident during early life stages of vehicle use (between 100Km and 250Km)
Associated Products (4)Associated Documents - October 18, 2021•Document ID: 10202974Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 2051562/8
- Date Added:
- November 4, 2021
- Manufacturer:
- BENTLEY
Summary12 Volt - Battery condition checks. Customer statement / workshop findings: 12 Volt Battery test instruction Technical background: For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the Measure section of this TPI
Associated Products (4)Associated Documents - October 8, 2021•Document ID: 10202975Service Bulletin/Repair InstructionsFORWARD COLLISION AVOIDANCE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2064648/1
- Date Added:
- November 4, 2021
- Manufacturer:
- BENTLEY
SummaryACC Unavailable-Traffic Assist Failure-Safeguard Failure-Radar Malfunction Warning DIP - Numerous DTCs within 0013. Customer statement: One or numerous of the following issues are evident: - ACC Failure - Traffic Assist Failure - Safeguard Failure - Radar Malfunction Workshop findings One or a combination of the following DTCs and symptom codes are evident within address 0013 -B200FF0 with Symptom code 1367 or 1313 - Internal Malfunction
Associated Products (2)Associated Documents - October 4, 2021•Document ID: 10203243Service Bulletin/Repair InstructionsSUSPENSION; STEERING; SERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 2052853/7
- Date Added:
- November 6, 2021
- Manufacturer:
- BENTLEY
SummaryClicking noises from the left and/or right front corner(s). Condition: Clicking noises from the left and/or right front corner(s) Technical Background: In order to accurately diagnose and repair customer reported clicking noises from the front corner(s) the Measure section of this TPI consists of three individual sections, each section describes the symptom and the remedy which should be applied Symptoms and descriptions regarding clicking noises can appear to be very similar when described, where possible the customer should demonstrate the reported symptom to enable correct diagnosis
Associated Products (2)Associated Documents - October 4, 2021•Document ID: 10203240Service Bulletin/Repair InstructionsSEAT BELTS
- Mfr Comm. #:
- 2058411/4
- Date Added:
- November 6, 2021
- Manufacturer:
- BENTLEY
SummarySeat belt buckle stop button - Missing, Condition: Seat belt buckle stop button missing Technical Background: The seat belt buckle stop button should be evident as shown in Figure 1. Should the seatbelt be as shown in Figure 2 (Buckle stop button missing OR broken/loose) - Refer to the Measure section of this TPI
Associated Products (4)Associated Documents - October 4, 2021•Document ID: 10203229Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 2064680/1
- Date Added:
- November 6, 2021
- Manufacturer:
- BENTLEY
SummaryDTC P060600 evident within address 51 - Electric drive Control unit. Customer statement / workshop findings: High voltage system warning within the DIP Workshop findings: Power Electronics DTC P060600 evident within address 51 - Electric drive Control unit (DTC cannot be cleared) Technical background: DTC P060600 relates to an Active discharge counter error within address 51 (DTC cannot be cleared) In the event the symptoms are as described, conduct the instructions within the Measure section to completion noting the following: IMPORTANT: There are separate SVM codes and MUST be strictly applied as instructed - 4V051SW01 (MUST BE APPLIED FIRST) - 4V0EDU01 (MUST BE APPLIED SECOND)
Associated Products (2)Associated Documents - October 4, 2021•Document ID: 10203221Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; SUSPENSION
- Mfr Comm. #:
- 2064579/1
- Date Added:
- November 5, 2021
- Manufacturer:
- BENTLEY
SummaryBentayga - DTC C11C613 - Air suspension warning displayed in Driver Instrument Panel. Customer statement / workshop findings: Air suspension system warning displayed in the Driver Instrument Panel (DIP) Workshop findings DTC C11C613 (Symptom Code 3145826) - Valve for rapid filling of air suspension Open circuit stored in the Chassis control unit (Address 74) Technical background: In the event that the afore mentioned symptom(s) are evident please refer to the instructions within the Measure section of this TPI.
Associated Products (1)Associated Documents - October 4, 2021•Document ID: 10203042Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 2064582/1
- Date Added:
- November 5, 2021
- Manufacturer:
- BENTLEY
SummaryVehicle sitting low on one or more corners when static with no relevant DTCs stored. Customer statement / workshop findings - Vehicle sitting low on one or more corners when static - No relevant DTCs are evident Technical background: Refer to the Measure section of this TPI. Measure: 1) Confirm there are no DTCs indicating a fault with the air suspension system or associated systems 2) Refer to the instructions within TPI 2053492/- to confirm that no air leaks or issues relating to the air springs are evident.
Associated Products (4)Associated Documents - October 4, 2021•Document ID: 10203037Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; PARKING BRAKE; SERVICE BRAKES, ELECTRIC
- Mfr Comm. #:
- 2064519/1
- Date Added:
- November 5, 2021
- Manufacturer:
- BENTLEY
SummaryDTC's C10BCF6 - 160000 and/or C12E2F2 with symptom code 59744 stored in address 0003 - Parking brake warning in DIP. Customer statement: Parking brake warning light evident within the DIP (See example shown in Figure 1) Workshop findings: C10BCF6 - 160000 - Left parking brake motor Engine speed implausible OR C12E2F2 - 159744 - Right parking brake motor Engine speed implausible.
Associated Products (4)Associated Documents - October 4, 2021•Document ID: 10202972Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- 2061582/5
- Date Added:
- November 4, 2021
- Manufacturer:
- BENTLEY
SummaryDriver/Passenger door/s creak on close. Customer statement / workshop findings: Driver and/or Passenger door creak during the Close function Technical background: Ensure the fault is as described within the Customer statement, refer to the video on the Bentley Hub referencing TPI 2061582/- In the event the symptom is as shown the instructions within the Measure section should be followed.
Associated Products (2)Associated Documents - September 15, 2021•Document ID: 10202117Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STRUCTURE; EQUIPMENT
- Mfr Comm. #:
- 2064460/1
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryCustomer statement / workshop findings: Rear side window blind/s do not operate from the individual switches and/or from the drivers door master switches. Technical background: The following most common failure modes should be considered before proceeding with the instructions within the Measure section -Rear blind/s do not operate following a CAN bus sleep -Rear blind/s do not operate if the switch operation is a prolonged hold instead of a Press and release operation -Rear blind/s do not operate following the loss of control module basic settings -Rear blind/s will also not operate if the Child Lock is on -Rear blind/s will cease to operate if there are repeated operations of the blind sufficient to trigger a fail safe mode (usually between 10 to 15 operations in a very short period) -As instructed within the owners handbook, the rear blind/swill not operate if window is in the lowered position -The blind will also not operate in extreme cold temperature for example -10 degrees Celsius or 14 degrees, Fahrenheit. VERY IMPORTANT: In the event that all the previous recommendations have been checked/confirmed and the issue is still evident, the operative should conduct a software parameter update to all four door control modules 0042, 0052, 00BB, 00BC to restore the functionality of the rear blinds.
Associated Products (1)Associated Documents - September 15, 2021•Document ID: 10202115Service Bulletin/Repair InstructionsSTRUCTURE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2064469/1
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryBentayga - Rear Window Blinds Do Not Fully Retract. Customer statement / workshop findings: Rear window blind/s do not fully retract (Jammed)
Associated Products (2)Associated Documents - September 15, 2021•Document ID: 10202113Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EXTERIOR LIGHTING
- Mfr Comm. #:
- 2054599/8
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryCustomer statement / workshop findings: Headlamp operation issues Technical background: DTCs evident within the left light control unit (Diagnostic address D6) and/or the right light control unit (Diagnostic address D7) There are numerous static and intermittent DTCs which maybe evident within the previously mentioned control units, ensure all steps within the Measure section are strictly adhered to New Flying Spur (20 - 22 M/Y) and Bentayga (21 - 22 M/Y). In the event that DTCs C119813 Low beam light bulb open circuit or C1198FA Low beam light bulb short circuit are evident in D6 and/or D7. Please refer to and conduct the instructions within the following TPIs New Flying spur - TPI 2063777/- Bentayga applicable to 21 and 22 M/Y only - 2064497/-. For any other issues please refer to the instructions within the Measure section of this TPI.
Associated Products (4)Associated Documents - September 15, 2021•Document ID: 10202112Service Bulletin/Repair InstructionsLANE DEPARTURE; STEERING:STEERING CONTROL MODULE; ELECTRICAL SYSTEM; STEERING; EQUIPMENT ADAPTIVE/MOBILITY:VEHICLE CONTROLS:STEERING
- Mfr Comm. #:
- 2063855/2
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryCustomer statement: Lane Assist and/or Traffic Assist are not functional. Workshop findings: DTC-B17B801- Steering Wheel Touch Recognition Control Module evident within address 0019 And/or DTCB17B804 -Steering Wheel Touch Recognition Control Module electrical error- evident within address 0019 And/or DTC U112300 with symptom Code 1123220 within address 00A5. Technical background PLEASE NOTE: Should the affected vehicle be post the following listed VINs -Bentayga - SJAA514V3MC036546 -New Continental GT/C and New Flying Spur - SCBB15ZG1MC088177 The operative MUST raise a DISS query and await feedback before conducting any further work. For all vehicles up to and including the afore mentioned VINs the operative should conduct the instructions within the Measure section.
Associated Products (2)Associated Documents - September 15, 2021•Document ID: 10202111Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EXTERIOR LIGHTING
- Mfr Comm. #:
- 2064497/1
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryBentayga - DTC for Low Beam Light Bulb Open or Short Circuit DTCs C119813 Low beam light bulb open circuit or C1198FA Low beam light bulb short circuit evident in D6 and/or D7. Customer statement: Head lamp low beam not functioning and/or warning within the DIP. Workshop findings: DTCs C119813 Low beam light bulb open circuit active/static and/or C1198FA Low beam light bulb short circuit active/static logged within diagnostic address D6 (light control left) and/or D7 (light control right). Technical background: The DTCs once triggered are unable to be cleared, with the DTCs logged the Headlamp low beam will not operate. In the event the symptoms are as described, conduct the instructions within the Measure section to completion noting the following: -The update to address D6 Must be done first followed by the update to address D. -Regardless of the DTC which is evident or the address in which the DTC/DTCs are evident, both SVM codes MUST be applied. IMPORTANT: There are separate SVM codes for each diagnostic address D6 (light control left) - 4V0D6BA01 (MUST BE APPLIED FIRST). D7 (light control right) - 4V0D7BA01 (MUST BE APPLIED SECOND).
Associated Products (2)Associated Documents - September 15, 2021•Document ID: 10201904Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 2064482/1
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryAudible creak from the lower/central A Post when opening and/or closing the front door/s. Customer statement / workshop findings: Audible creak coming from the lower/central A Post in the vicinity of the check strap fixing point during the opening and/or closing of the driver/passenger door. Technical background: To confirm the issue is as described within the Customer statement refer to the video on the Bentley Hub referencing TPI2064482/-. In the event that the noise is as shown within the video the instructions within the Measure section should be followed.
Associated Products (2)Associated Documents - September 15, 2021•Document ID: 10201900Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EXTERIOR LIGHTING; EXTERIOR LIGHTING:TAIL LIGHTS:SWITCH
- Mfr Comm. #:
- 2063070/2
- Date Added:
- October 7, 2021
- Manufacturer:
- BENTLEY
SummaryBentayga -Auxiliary tail lights in bumper operating instead of main tail lights when not intended. Customer statement / workshop findings: The auxiliary tail lamps in the rear bumper are illuminated instead of the main tail lamps with the tailgate closed, there is no fault with the main tail lamps. Technical background: The auxiliary tail lamps are designed to illuminate under two scenarios: -When the tailgate is open and when there is a fault with the main tail lamp. -If the tailgate is closed and diagnosis has proven, byway of no DTCs, that the main tail lamps are not faulty, then the Rear lid closed sensor (G525) switch must be checked for locational and electrical integrity.
Associated Products (1)Associated Documents - September 10, 2021•Document ID: 10201982Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT; STRUCTURE
- Mfr Comm. #:
- 2062075/2
- Date Added:
- October 6, 2021
- Manufacturer:
- BENTLEY
SummaryOwner's Handbook - Incorrect roof console image shown - Garage Door Opener (GDO) Condition: The Owners Handbook is showing an incorrect roof console image, highlighting the Garage Door Opener (GDO) programming switches for Bentayga 21MY vehicle derivatives NOTE: The (GDO) is an optional feature
Associated Products (2)Associated Documents