Audi S4 Service Bulletins
2,734 manufacturer communications on file.
- December 20, 2013•Document ID: 10221995Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01134820330015
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryUnder certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
Associated Products (15)Associated Documents - December 20, 2013•Document ID: 10121402Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A011349 2035454-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 13-35 dated October 8, 2013. During reset of the service reminder, the message ?AIR system - action required - observe test plan? appears on the ODIS tester. MIL is not illuminated. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction. The ODIS tester can identify the state of the restriction, and will request that the system is cleaned in order to prevent the MIL from illuminating.
Associated Products (17)Associated Documents - December 20, 2013•Document ID: 10121401Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- A011348 2033001-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 13-37 dated October 10, 2013. MIL on. DTCs are stored in the engine control module. Mileage is greater than 15,000 miles. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
Associated Products (15)Associated Documents - December 17, 2013•Document ID: 10127809Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- PDI-2014 ALL MOD
- Date Added:
- February 5, 2018
- Manufacturer:
- AUDI
SummaryThis document contains the Audi vehicle detail report. DO NOT use accessories (radio, etc.) while performing detail, as this can discharge the battery. Refer to TSB 2009967 for Detailer responsibilities, specific use of chemicals, and for part numbers to order materials. Only operate power convertible top with engine running to conserve battery power (A5/S5 Cab, R8 ONLY) DO NOT allow convertible top to remain in a partially opened or partially closed position for longer than 5 minutes. This will cause the top to stop functioning and will require service (A5/S5 Cab, R8 ONLY) DO NOT treat vehicle parts painted with matte finish paint using polishing materials or hard wax. NEVER use protective wax. It can destroy the matte finish effect. Only use a microfiber cloth for cleaning (R8 ONLY). This document is in Spanish.
Associated Products (19)Associated Documents - December 17, 2013•Document ID: 10121453Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- PDI-2014 ALL MOD
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the Audi vehicle condition checklist. This document is in Spanish.
Associated Products (15)Associated Documents - December 12, 2013•Document ID: 10121460Service Bulletin/Repair InstructionsTIRES; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Reference-Audi M
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the Audi normal load condition tire pressure table. This document is in Spanish.
Associated Products (19)Associated Documents - December 12, 2013•Document ID: 10121442Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- PDI-2014 A4 TECH
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the Audi technician report checklist. All items must be completed prior to customer delivery by an Audi technician. Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests. Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection. This document is in Spanish.
Associated Products (3)Associated Documents - December 12, 2013•Document ID: 10121441Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- PDI-2014 A4 DELI
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the Audi delivery report checklist. This document is in Spanish.
Associated Products (3)Associated Documents - December 9, 2013•Document ID: 10251027Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- 44134620103345
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummaryTightening wheel bolts
Associated Products (257)Associated Documents - December 9, 2013•Document ID: 10121408Service Bulletin/Repair InstructionsWHEELS; WHEELS:LUGS/NUTS/BOLTS/STUDS
- Mfr Comm. #:
- A441346 2010334-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 44 number 12-32 dated August 2, 2012. Wheel bolt requires torque adjustment. Torque sticks, torque extension bars, and impact guns/wrenches are not approved by Audi of America, Inc., and should not be used to apply torque to wheel bolts. Always use a calibrated torque wrench to attain the correct wheel bolt torque and follow the proper wheel tightening procedure as outlined in Elsa. Proper use of a calibrated torque wrench ensures that all wheel bolts are tightened equally and reduces the chances of repeat repairs. Using methods other than a calibrated torque wrench to attain correct wheel bolt torque may lead to problems.
Associated Products (168)Associated Documents - December 9, 2013•Document ID: 10054859Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- TSB-44-13-46
- Date Added:
- March 6, 2014
- Manufacturer:
- AUDI
SummaryAUDI: ON CERTAIN VEHICLES, USE CALIBRATED TORQUE WRENCH AND NOT TORQUE STICKS, TORQUE EXTENSION BARS AND IMPACT GUNS/WRENCHES NOT APPROVED FOR USAGE ON WHEEL BOLTS BY MANUFACTURER, THAT CAN CAUSE DAMAGE TO BRAKE, STEERING WHEEL, HUB. MODEL 1995-2014 ALL. *PE
Associated Products (201)Associated Documents - December 6, 2013•Document ID: 10243819Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Detail
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Vehicle Detail Report
Associated Products (24)Associated Documents - December 6, 2013•Document ID: 10121440Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- PDI - 2015 All A
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the Audi vehicle detail report. DO NOT use accessories (radio, etc.) while performing detail, as this can discharge the battery. Refer to TSB 2009967 for Detailer responsibilities, specific use of chemicals, and for part numbers to order materials. Only operate power convertible top with engine running to conserve battery power (A5/S5 Cab, R8 ONLY) DO NOT allow convertible top to remain in a partially opened or partially closed position for longer than 5 minutes. This will cause the top to stop functioning and will require service (A5/S5 Cab, R8 ONLY) DO NOT treat vehicle parts painted with matte finish paint using polishing materials or hard wax. NEVER use protective wax. It can destroy the matte finish effect. Only use a microfiber cloth for cleaning (R8 ONLY).
Associated Products (19)Associated Documents - December 6, 2013•Document ID: 10053944Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SB-48326
- Date Added:
- December 6, 2013
- Manufacturer:
- AUDI
SummaryAUDI: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. INFORMATION PROVIDED REGARDING WARRANTY EXTENSION ON CARBON BUILDUP REMOVAL, ENGINE CYLINDER HEAD SECONDARY AIR PORTS. MODELS 2009-2012. NO MODEL PROVIDED. *PE
Associated Products (68)Associated Documents - December 5, 2013•Document ID: 10228340Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
- Mfr Comm. #:
- 01134520314584
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryUnder extreme driving conditions (such short-distance, stop-and-go driving), high crankcase pressure can cause the DTCs to appear.
Associated Products (12)Associated Documents - December 5, 2013•Document ID: 10226449Service Bulletin/Repair InstructionsLANE DEPARTURE
- Mfr Comm. #:
- 96138020305834
- Date Added:
- November 21, 2022
- Manufacturer:
- AUDI
SummaryFalse warning by lane change assistant (Audi Side Assist)
Associated Products (6)Associated Documents - December 5, 2013•Document ID: 10225019Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
- Mfr Comm. #:
- 01134520314584
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryUnder extreme driving conditions (such short-distance, stop-and-go driving), high crankcase pressure can cause the DTCs to appear.
Associated Products (12)Associated Documents - December 5, 2013•Document ID: 10221992Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
- Mfr Comm. #:
- 01134520314584
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryUnder extreme driving conditions (such short-distance, stop-and-go driving), high crankcase pressure can cause the DTCs to appear.
Associated Products (12)Associated Documents - December 5, 2013•Document ID: 10068753Service Bulletin/Repair InstructionsLANE DEPARTURE: ASSIST
- Mfr Comm. #:
- 2030583/4
- Date Added:
- June 2, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (6)Associated Documents - December 5, 2013•Document ID: 10121422Service Bulletin/Repair InstructionsLANE DEPARTURE: BLIND SPOT DETECTION; LANE DEPARTURE: ASSIST
- Mfr Comm. #:
- A961380 2030583-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 96 number 13-76 dated September 23, 2013. Customer complains that Audi Side Assist is providing false warnings (no vehicle is present). Concern may or may not be duplicated. No DTCs are present in the Audi Side Assist system. This condition occurs due to an incorrect hardware set created by the supplier.
Associated Products (6)Associated Documents