Audi A5 Service Bulletins
4,447 manufacturer communications on file.
- April 24, 2013•Document ID: 10210644Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- 37 13 01 2028985
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryThe fault occurs with ATF temperature below 60o C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
Associated Products (18)Associated Documents - April 24, 2013•Document ID: 10123914Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- A371301 2028985-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 37 number 13-97 dated March 4, 2013. Customer may report transmission warning lamp illuminated in instrument cluster. After ignition cycle, the warning message is no longer present. DTC P074100 (Torque Converter Clutch Circuit Performance) or "Stuck Off" is stored in transmission control module (TCM), J217 (address word 03). The fault occurs with ATF temperature below 60o C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
Associated Products (18)Associated Documents - April 22, 2013•Document ID: 10243785Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition33
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (31)Associated Documents - April 19, 2013•Document ID: 10212674Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER; ENGINE
- Mfr Comm. #:
- 28 13 21 2017555
- Date Added:
- May 31, 2022
- Manufacturer:
- AUDI
SummaryKey does not stay or engage in ignition lock
Associated Products (27)Associated Documents - April 19, 2013•Document ID: 10210622Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 28 13 21 2017555
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryIt is possible that objects have been inserted into the ignition lock, which causes the slide of the ignition lock to become stuck in the rear part of the lock (S-contact position). The stuck slide is not allowed to return to the starting point (0-position).
Associated Products (27)Associated Documents - April 19, 2013•Document ID: 10123929Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- A851316 2033596-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummaryThe fresh air blower is inoperative. DTCs may be stored in the heating and air conditioning electronics control module (address word 08). Malfunctions of the fresh air blower could be caused by a faulty printed circuit board in the fresh air blower control module and the carbon brushes bind in the brush holder and, as a consequence, lose contact with the motor commutator of the fresh air blower.
Associated Products (13)Associated Documents - April 19, 2013•Document ID: 10123911Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- A281321 2017555-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 28 number 12-19 dated May 1, 2012. The master key with remote control does not engage or stay in the ignition lock. On vehicles without Advanced Key, the remote keys are inoperable. Keyless unlocking/locking using the door handle and keyless opening of the trunk lid using the trunk handle are inoperable. The vehicle cannot be started with the Start/Stop button. The remote keys are inoperable. The message "ignition lock faulty" may appear in the instrument cluster driver information display. DTC 00166 (Access/Start Authorization Switch -E415- Incorrect Signal) may be stored in Comfort System Central Control Module J393 (address word 46). It is possible that objects have been inserted into the ignition lock, which causes the slide of the ignition lock to become stuck in the rear part of the lock (S-contact position). The stuck slide is not allowed to return to the starting point (0-position).
Associated Products (27)Associated Documents - April 15, 2013•Document ID: 10228363Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 01138620336301
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryBecause there are a number of different misfire faults (unrelated to ignition coil operation) that could cause the MIL to illuminate, proper Guided Fault Finding (GFF) misfire diagnosis must be followed before any ignition coils are replaced.
Associated Products (48)Associated Documents - April 15, 2013•Document ID: 10225042Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRICAL SYSTEM:IGNITION
- Mfr Comm. #:
- 01138620336301
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryBecause there are a number of different misfire faults (unrelated to ignition coil operation) that could cause the MIL to illuminate, proper Guided Fault Finding (GFF) misfire diagnosis must be followed before any ignition coils are replaced.
Associated Products (48)Associated Documents - April 15, 2013•Document ID: 10222015Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 01138620336301
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryBecause there are a number of different misfire faults (unrelated to ignition coil operation) that could cause the MIL to illuminate, proper Guided Fault Finding (GFF) misfire diagnosis must be followed before any ignition coils are replaced.
Associated Products (48)Associated Documents - April 15, 2013•Document ID: 10216657Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 133620334911
- Date Added:
- August 1, 2022
- Manufacturer:
- AUDI
SummaryCustomer may report coolant leaking from the engine area. The leak can be traced to the connection of the water pump and the hose leading to the heater core (Figure 1). The seal ring is not the cause of the leak.
Associated Products (20)Associated Documents - April 15, 2013•Document ID: 10123905Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A191336 2033491-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummaryCustomer may report coolant leaking from the engine area. The leak can be traced to the connection of the water pump and the hose leading to the heater core. The seal ring is not the cause of the leak.
Associated Products (20)Associated Documents - April 15, 2013•Document ID: 10123904Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; ENGINE
- Mfr Comm. #:
- A011386 2033630-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummaryMIL on. Rough idle. DTCs are stored in the Engine Control Module (ECM), J623 (address word 01). Engine may have reduced performance without significant loss of power or stalling. Because there are a number of different misfire faults (unrelated to ignition coil operation) that could cause the MIL to illuminate, proper Guided Fault Finding (GFF) misfire diagnosis must be followed before any ignition coils are replaced.
Associated Products (48)Associated Documents - April 9, 2013•Document ID: 10212696Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 37 13 00 2032812
- Date Added:
- May 31, 2022
- Manufacturer:
- AUDI
SummaryHesitation concerns, Harsh downshifts when braking or harsh 1-2 upshifts.
Associated Products (6)Associated Documents - April 9, 2013•Document ID: 10210643Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- 37 13 00 2032812
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryFurther transmission control module (TCM), J217, software calibration needed to improve shift concerns. Further engine control module (ECM), J623, software calibration needed to improve hesitation.
Associated Products (6)Associated Documents - April 9, 2013•Document ID: 10066835Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- 2032812/2
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (6)Associated Documents - April 9, 2013•Document ID: 10123913Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A371300 2032812-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 37 number 13-83 dated January 31, 2013. Hesitation concerns, harsh downshifts when braking, or harsh 1-2 upshifts. Further transmission control module (TCM), J217, software calibration needed to improve shift concerns. Further engine control module (ECM), J623, software calibration needed to improve hesitation.
Associated Products (6)Associated Documents - April 9, 2013•Document ID: 10051750Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:MANUAL TRANSMISSION
- Mfr Comm. #:
- TSB-37-13-83
- Date Added:
- April 9, 2013
- Manufacturer:
- AUDI
SummaryAUDI: WHEN BRAKING, WOULD HAVE HARSH DOWNSHIFTS AND HESITATION CONCERNS AND ALSO UPSHIFTS 1-2 ARE HARSH. CALIBRATION OF SOFTWARE TO IMPROVE SHIFT CONCERNS AND HESITATION. MODELS 2011-12 A4, A4 AVANT, A5, A5 CABRIOLET, Q5. *PE UPDATED 7/1/13. *PE
Associated Products (6)Associated Documents - April 5, 2013•Document ID: 10212666Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL:CRUISE CONTROL; EQUIPMENT
- Mfr Comm. #:
- 27 13 17 2033524
- Date Added:
- May 31, 2022
- Manufacturer:
- AUDI
SummaryCruise control sporadically does not work, set button jams
Associated Products (10)Associated Documents - April 5, 2013•Document ID: 10210614Service Bulletin/Repair InstructionsPARKING BRAKE
- Mfr Comm. #:
- 27 13 17 2033524
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryIncorrect tolerances of cruise control ?Set? button. Cruise control deactivates sporadically or cannot be activated. A new set speed cannot be saved. ?Set? button on cruise control stalk does not work.
Associated Products (10)Associated Documents