2025 Tesla Cybertruck Illegible Emission Label TSB

Why this matters

While not a safety issue, the Vehicle Emission Control Information label is a crucial component for regulatory compliance and provides important technical specifications about your vehicle's emissions system. An illegible label could lead to complications during vehicle inspections, resale, or if specific emission-related information is needed for service or registration. Ensuring this label is clear and readable is important for maintaining your vehicle's documentation and compliance.

Symptoms

The primary symptom addressed by this service bulletin is an "illegible Vehicle Emission Control Information label" on certain 2025 Tesla Cybertruck vehicles. This means the text printed on the label is unclear, faded, or otherwise unreadable.

Diagnosis / trigger conditions

According to Tesla Service Bulletin SB-25-19-001, if this bulletin is applicable to your 2025 Tesla Cybertruck, the correction should be performed without any need for prior inspection. This indicates that the issue is a known manufacturing defect affecting a specific batch of labels.

Repair procedure summary

The repair involves a straightforward process to replace the existing illegible label with a new, clearly printed one. Here's a summary of the steps a technician will follow:

1. The powergate of the Tesla Cybertruck is opened to access the location of the Vehicle Emission Control Information label.
2. Masking tape is carefully applied around the edges of the existing label. This helps ensure the new label is installed precisely in the correct position.
3. A plastic trim tool is used to gently peel off the old, illegible label from the powergate. This tool helps prevent damage to the vehicle's surface during removal.
4. Any remaining adhesive residue or label fragments are thoroughly cleaned from the area using an alcohol wipe (IPA wipes). The surface is then allowed to dry completely to ensure proper adhesion for the new label.
5. The new Vehicle Emission Control Information label (part number 2462927-00-C) is then installed onto the cleaned surface on the powergate. The technician will press the label firmly to ensure it adheres properly.
6. Finally, the masking tape is removed, completing the replacement of the Tesla Cybertruck emission label.

Required tools or parts

To perform this correction, specific parts and shop supplies are required:

• Part Number: 2462927-00-C
  • Description: LABEL- VEHICLE EMISSION CONTROL INFORMATION
  • Quantity: 1
• Shop Supplies: IPA wipes

The correction time for this procedure is designated as S012519001, estimated at 0.06 hours.

Owner action

If you own a 2025 Tesla Cybertruck and suspect your Vehicle Emission Control Information label might be illegible, or if you are notified by Tesla, you should contact a Tesla service center to schedule an appointment. Since this is addressed by a campaign bulletin, the replacement of the Tesla Cybertruck emission label will be performed free of charge. The service center will verify your vehicle's applicability to Service Bulletin SB-25-19-001 and proceed with the label replacement.

Source: NHTSA ID 11017592