2021-2022 Nissan Rogue / Pathfinder Automatic Back Door Inoperative
Nissan Technical Bulletin NTB21-081B addresses instances where the automatic (power) back door in 2021-2022 Nissan Rogue and Pathfinder vehicles becomes inoperative. The bulletin provides initial diagnostic steps and crucial warnings regarding recalibration procedures.

Also applies to
- Nissan Pathfinder
- 2022
- Nissan Rogue
- 2022
Owners of 2021-2022 Nissan Rogue and Pathfinder vehicles may experience an "AUTOMATIC BACK DOOR INOPERATIVE" condition, where the power back door fails to open, close, or latch properly. Nissan Technical Bulletin NTB21-081B provides guidance for technicians to diagnose and resolve this issue, starting with a simple check that owners can perform themselves.
Symptoms of an Inoperative Automatic Back Door
The primary symptom is an automatic (power) back door that does not function as expected. This can manifest as the door failing to open, close, or latch correctly. If you are experiencing an issue with your Nissan Rogue automatic back door, this bulletin may apply to your vehicle.
Initial Check: Power Back Door Setting
Before any extensive diagnostics, technicians are instructed to confirm that the "Power Back Door" setting is enabled in the Vehicle Settings menu. This is a crucial first step, as the door will be inoperative if this setting is turned off. Owners can also perform this check:
- Navigate to the Vehicle Information Display.
- Use the scroll dial and buttons on the steering wheel to access the Vehicle Settings menu.
- Locate the "Power Back Door" option and ensure it is set to ON.
If the setting is already ON and the automatic back door remains inoperative, further diagnosis by a qualified technician is required.
Important Warning Regarding Recalibration and DTC B2428-54
Nissan has issued a critical warning regarding the recalibration of the Automatic Back Door Control Unit. Attempting to recalibrate this unit while troubleshooting other components of the Power Back Door (PBD) system—such as the hatch latch, wiring harnesses, control buttons, or touch sensors—can lead to significant problems. This incorrect recalibration can erroneously generate Diagnostic Trouble Code (DTC) B2428-54 PBD CONTROLLER CALIBRATION LOST and may result in the unnecessary replacement of the Automatic Back Door Control Unit.
Recalibration of the Automatic Back Door Control Unit should only be performed if the unit itself, the Automatic Back Door Spindle Unit, or the entire Back Door Assembly has been removed and reinstalled or replaced. This warning helps prevent misdiagnosis and costly, unneeded part replacements for issues related to the Nissan Rogue automatic back door.
Diagnostic Steps for Technicians
If the "Power Back Door" setting is confirmed to be ON and the door is still inoperative, technicians should refer to ASIST (Nissan's service information system) and the Electronic Service Manual (ESM) for detailed diagnostic procedures. The bulletin emphasizes that recalibration is a specific procedure tied to the replacement or removal of certain components, not a general troubleshooting step for an inoperative door.
What Owners Should Do
If your 2021-2022 Nissan Rogue or Pathfinder is experiencing an "AUTOMATIC BACK DOOR INOPERATIVE" condition, first check the "Power Back Door" setting in your vehicle's information display. If the setting is already ON and the issue persists, contact your authorized Nissan dealer. Inform them about Technical Bulletin NTB21-081B, as it provides specific guidance for diagnosing and resolving this issue. This will help ensure your Nissan Rogue automatic back door is properly inspected and repaired.
Bulletin History
This bulletin has undergone several revisions:
- September 7, 2021 (NTB21-081): Original bulletin published.
- February 2, 2022 (NTB21-081A): Added the 2022 model year and additional information.
- February 14, 2022 (NTB21-081B): Revised the list of applied vehicles.
Source: NHTSA ID 10208962
Frequently Asked Questions
- What should I do if my 2021-2022 Nissan Rogue automatic back door is not working?
- First, check the "Power Back Door" setting in your vehicle's information display to ensure it is set to ON. If the setting is already on and the door is still inoperative, contact your Nissan dealer for diagnosis and repair, referencing Technical Bulletin NTB21-081B.
- Can I fix the "AUTOMATIC BACK DOOR INOPERATIVE" issue myself?
- You can check if the "Power Back Door" setting is enabled in your vehicle's settings. If this simple check doesn't resolve the issue, further diagnosis and repair should be performed by a qualified Nissan technician, as incorrect procedures can lead to additional problems.
- What is DTC B2428-54 and how is it related to the power back door?
- DTC B2428-54, or "PBD CONTROLLER CALIBRATION LOST," is an erroneous fault code that can be generated if the Automatic Back Door Control Unit is recalibrated incorrectly. Nissan warns against recalibrating this unit unless specific components (like the unit itself or the back door assembly) have been removed or replaced, to avoid this DTC and unnecessary part replacement.
- Which Nissan models are affected by the automatic back door issue addressed in NTB21-081B?
- This issue primarily affects 2021-2022 Nissan Rogue and 2022 Nissan Pathfinder vehicles, specifically those with SV with Premium Package, SL, and Platinum grades.
Related Articles
2021-2023 Nissan Infotainment Control Unit Replacement TSB
This Technical Service Bulletin (TSB) outlines the essential three-step procedure for replacing the infotainment control unit in various 2021-2023 Nissan models, ensuring Over The Air (OTA) updates and other functions work correctly.
2021-2022 Nissan Rogue Infotainment Issues TSB
Nissan has released a technical service bulletin (TSB) for 2021-2022 Rogue models to resolve various infotainment system issues through a software update. This update also relates to the back-over prevention and electrical systems.
2021-2023 Nissan Rogue Rear Differential Noise TSB
Nissan Technical Service Bulletin NTB10-0291 details the diagnosis and repair for abnormal noise, vibration, or binding feelings originating from the rear differential in 2021-2023 Nissan Rogue and other AWD models. Learn about common causes and the recommended repair procedures.
2021 Nissan Rogue P0780 Shift Error TSB
A Technical Service Bulletin (NTB22-093) has been issued for the 2021 Nissan Rogue (T33) regarding Diagnostic Trouble Code P0780, indicating a "SHIFT ERROR" stored in the Transmission Control Module (TCM). This TSB outlines a reprogramming procedure for the TCM and Shift Control Module (SCM) to…
2021 Nissan Rogue DTC P0780 in TCM TSB Superseded
Nissan Technical Service Bulletin NTB21-023C, concerning diagnostic trouble code P0780 in the Transmission Control Module (TCM) for the 2021 Nissan Rogue, has been superseded by NTB22-093. Owners should refer to the latest bulletin for current repair procedures.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.