2026 Jeep Wrangler Steering Alignment TSB 19-008-25

Owners of certain 2026 Jeep Wrangler vehicles may notice issues with their steering alignment. This concern is addressed by Technical Service Bulletin (TSB) 19-008-25, which identifies the root cause as potentially unsecured adjustment clamp fasteners on the tie rod and draglink.

Symptoms

The primary symptom reported by customers is "Degrading steering alignment". This can manifest as the vehicle pulling to one side, a loose or vague feeling in the steering, or difficulty maintaining a straight path without constant steering corrections. Over time, poor alignment can also lead to uneven tire wear, reducing tire lifespan and potentially affecting vehicle handling and safety.

Diagnosis and Trigger Conditions

This TSB applies to 2026 Jeep Wrangler vehicles built on or after November 16, 2025 (MDH 1116XX) and on or before November 19, 2025 (MDH 1119XX). To determine if your vehicle is affected, a dealership can check its VIN against the Rapid Service Update (RSU) 25-258 list using the VIP system or a VIN search in DealerCONNECT/Service Library. Even if your VIN is not on the RSU list, if your vehicle exhibits the symptom of "degrading steering alignment", the repair procedure outlined in TSB 19-008-25 should be performed.

Repair Procedure Summary

The repair procedure involves inspecting and, if necessary, tightening the tie rod and draglink adjustment clamp fasteners to the correct specification. Here's a summary of the steps a technician will take:

1. Vehicle Preparation: The vehicle is positioned on a lift according to standard service procedures.
2. Access Fasteners: The front wheels are turned full left to provide access to the draglink adjuster fastener and both tie rod adjustment clamp fasteners.
3. Initial Torque Check: The technician will check the current torque of the draglink adjustment clamp fastener and both tie rod adjustment clamp fasteners. The specified torque is 46 N·m (34 ft lbs.).
4. Tightening (If Needed): If any of the fasteners are not at the specified torque, they will be tightened to 46 N·m (34 ft lbs.). This ensures all critical steering linkage components are securely fastened.
5. Final Steps: After tightening, the vehicle is lowered from the lift.

This process is designed to resolve the issue of 2026 Jeep Wrangler degrading steering alignment by ensuring the steering components are properly secured.

Important Warnings

This bulletin, TSB 19-008-25, is specifically intended for the North America market. All repairs performed under this Technical Service Bulletin are reimbursable within the provisions of your vehicle's warranty.

Owner Action

If you own a 2026 Jeep Wrangler and are experiencing "degrading steering alignment" or have concerns about your vehicle's steering, you should contact your authorized Jeep dealer. They can check if your vehicle's VIN is included in the RSU 25-258 list and perform the necessary inspection and repair. Since this is a warranty-covered repair, there should be no cost to you.

Source: NHTSA ID: 11027240