Service Bulletin

2022-2023 Jeep Wrangler 3.6L Engine Ticking Noise TSB

An abnormal engine ticking noise in 2022-2023 Jeep, RAM, and Dodge vehicles equipped with the 3.6L engine may be caused by a manufacturing issue with the INTAKE Hydraulic Lash Adjusters. This technical service bulletin (NHTSA ID 10247902) provides diagnostic and repair guidance.

ByAhmet Topcu — Founder & Editor-in-Chief2023 Jeep Wrangler
2023 Jeep Wrangler — Jeep Wrangler engine ticking noise
Editorial illustration generated for this article.
10247902TSBmanufacturer_communication3.6L engine ticking noiseabnormal ticking noisevalvetrain noiseINTAKE Hydraulic Lash AdjustersINTAKE HLAHydraulic Lash Adjusterplunger to stick
Jeep Gladiator
2022–2023
Jeep Grand Cherokee
2022–2023
Jeep Wrangler
2022
Dodge Durango
2022
Ram 1500
2022–2023

Symptoms of the Jeep Wrangler Engine Ticking Noise

Owners of 2022-2023 Jeep Wrangler, Gladiator, Grand Cherokee, RAM 1500, and Dodge Durango vehicles equipped with the 3.6L engine may notice an abnormal ticking noise. This valvetrain noise can occur at various engine speeds, whether at low or high RPMs, and regardless of engine temperature.

Understanding the Cause

This persistent engine ticking noise is often attributed to a manufacturing issue affecting the INTAKE Hydraulic Lash Adjusters (HLAs). Specifically, the plunger within these adjusters may stick, leading to the characteristic valvetrain noise.

Diagnosis and Repair

Before considering a full engine replacement, technicians are advised to thoroughly inspect the INTAKE Hydraulic Lash Adjusters. The key diagnostic step is to check if any INTAKE HLAs are

Frequently Asked Questions

What is the primary cause of the 3.6L engine ticking noise?
The primary cause of the 3.6L engine ticking noise, as identified in manufacturer communication NHTSA ID 10247902, is a manufacturing issue with the INTAKE Hydraulic Lash Adjusters (HLAs) where the plunger may stick.
Will a check engine light or DTC appear for this issue?
No, the manufacturer communication explicitly states that there are no Diagnostic Trouble Codes (DTCs) present with this specific engine ticking noise issue.
What is the recommended repair for the Jeep Wrangler engine ticking noise?
The recommended repair involves checking if the INTAKE Hydraulic Lash Adjusters are collapsed. If a collapsed INTAKE HLA is found, all INTAKE HLAs on the affected cylinder head should be replaced.
Which vehicles are affected by this 3.6L engine ticking noise TSB?
This technical service bulletin (NHTSA ID 10247902) applies to 2022-2023 Jeep Wrangler, Jeep Gladiator, Jeep Grand Cherokee, RAM 1500, and 2022 Dodge Durango models equipped with the 3.6L engine.

Related Articles

2023 Jeep Wrangler Problems: Recalls & Service Bulletins

The 2023 Jeep Wrangler faces a significant recall for its defrost system, potentially reducing driver visibility. Owners may also encounter engine misfire DTCs, heated steering wheel issues, and various other concerns addressed by numerous service bulletins. This guide details known problems and…

2023 Jeep Wrangler Misfire DTCs PCM Software Update

A Technical Service Bulletin (TSB 18-048-26) addresses Malfunction Indicator Lamp (MIL) illumination and various misfire Diagnostic Trouble Codes (DTCs) in 2023 Jeep Wrangler vehicles. Symptoms include rough idle, engine miss, and noisy valvetrain, all caused by PCM software. The fix involves…

2023 Jeep Wrangler PCM Update for MIL & Misfire DTCs

Jeep has released TSB 18-046-26 for 2023 Wrangler models experiencing Malfunction Indicator Lamp (MIL) illumination, various misfire DTCs (P0300-P0306), rough idle, or a "Service Transmission" message. The fix involves a Powertrain Control Module (PCM) software update to improve engine performance…

2023 Jeep Wrangler Heated Steering Wheel Not Working TSB 08-120-26

Owners of 2023 Jeep Wrangler vehicles may experience a heated steering wheel that does not get hot enough or fails to work. Technical Service Bulletin (TSB) 08-120-26 provides a software update for the Comfort Seat Wheel Module (CSWM) to resolve this issue.

2023 Jeep Wrangler Heated Steering Wheel Not Working TSB

Owners of 2023 Jeep Wrangler vehicles with heated steering wheels may experience the steering wheel not heating up sufficiently or not working at all. Technical Service Bulletin (TSB) 08-120-26 provides a software update for the Comfort Seat Wheel Module (CSWM) to resolve this issue.

Comments

Be the first to comment.

Leave a comment

Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.

Verifying you are human...