2023-2024 Audi Gateway Control Module Service Action 90X4
Audi has initiated Service Action 90X4 to address potential issues with the gateway control module in various 2023-2024 models. This service action involves replacing the module free of charge to owners, ensuring proper vehicle communication and functionality.

Also applies to
- Audi A4
- 2024
- Audi A4 allroad
- 2024
- Audi A5
- 2024
- Audi A6
- 2023–2024
- Audi A6 allroad
- 2024
- Audi A7
- 2024
- Audi e-tron GT
- 2023–2024
- Audi Q5
- 2024
- Audi Q7
- 2024
- Audi Q8
- 2023
- Audi RS 5
- 2024
- Audi RS 6 Avant
- 2024
- Audi RS 7
- 2024
- Audi RS e-tron GT
- 2023–2024
- Audi RS Q8
- 2024
- Audi S4
- 2024
- Audi S5
- 2024
- Audi S6
- 2024
- Audi S7
- 2024
- Audi S8
- 2024
- Audi SQ5
- 2024
- Audi SQ7
- 2023–2024
- Audi SQ8
- 2023–2024
▸ Show 17 more▾ Show fewer
Audi has issued Service Action 90X4, a proactive measure to replace the gateway control module in a range of 2023-2024 vehicles. This action ensures the continued optimal performance and communication within the vehicle's complex electronic systems. Owners of affected vehicles will have this repair performed free of charge by authorized Audi dealers.
The gateway control module, often referred to as the INTERFACE (Gateway control module) or J533, is a central component in modern Audi vehicles. It acts as a communication hub, allowing different control units and systems to exchange data. A properly functioning gateway module is critical for the seamless operation of various vehicle features, from infotainment to driver assistance systems.
What's Being Addressed
Service Action 90X4 specifically targets the replacement of the gateway control module. While the document does not specify a particular fault or symptom, this is a proactive service action by Audi to prevent potential future issues. The replacement ensures that the vehicle's data bus system operates correctly and reliably.
Important Warnings for Owners and Dealers
Audi has provided several critical warnings regarding Service Action 90X4:
- Expiration Date: This service action is available free of charge only until May 21, 2029. Any work performed after this date will incur normal costs.
- Inventory Vehicles: Dealers must ensure that every affected inventory vehicle has this campaign completed before delivery to consumers.
- Pre-existing Conditions: Diagnosis and repair of any pre-existing conditions in the vehicle are not covered under this campaign.
- Other Open Actions: If your vehicle has other open service actions or recalls, your dealer should inform you so that all necessary work can be completed during the same workshop visit.
- Safety Recalls: All Safety Recalls must be completed prior to completing this campaign.
- Protective Cover: Vehicles equipped with a protective cover over the gateway MUST have a new cover installed during replacement. Failure to do so can result in future damage to the gateway.
- Incorrect Installation: Improper installation of the protective cover can lead to future damage.
- Wash/Loaner: Dealers should
Gallery
15 images
Frequently Asked Questions
- What is the purpose of Audi Service Action 90X4?
- Audi Service Action 90X4 is a proactive measure to replace the gateway control module in certain 2023-2024 Audi models, including the Audi Q8 gateway control module. This ensures proper communication between the vehicle's electronic systems and prevents potential future issues.
- Will I be charged for the gateway control module replacement?
- No, the replacement of the gateway control module under Service Action 90X4 will be performed at no cost to the owner. However, this free service is only available until May 21, 2029. Work performed after this date may incur normal charges.
- How long does the gateway control module replacement take?
- The actual replacement work is estimated to take up to three hours. However, your dealer may require additional time for preparation and to accommodate their workshop schedule. It is recommended to contact your dealer to schedule an appointment.
- What critical steps are involved in the repair process?
- The repair involves several critical steps, including ensuring all safety recalls are completed first, installing a new protective cover if the vehicle was equipped with one, and performing a mandatory 'bus sleep' procedure after the new module is installed and basic settings for the '0015 – Basic setting inertial sensor' are completed. Failure to follow these steps can lead to further damage or malfunctions.
- How can I check if my Audi is affected by Service Action 90X4?
- You can check if your vehicle is affected by visiting www.audiusa.com and using the Recall/Service Campaign Lookup tool. Enter your Vehicle Identification Number (VIN) to determine if Service Action 90X4 applies to your Audi.
Related Articles
2023-2025 Audi MMI Emergency Call Fault Software Update
Audi has released Technical Service Bulletin 2079680/3 to address MMI function problems and 'Emergency call fault' messages in 2023-2025 Audi Q7, Q8, A6, A7, A8, and other models. A software update is available.
2024-2025 Audi Bluetooth / Smartphone Interface Connection Issue
Audi has identified a software issue causing slow Bluetooth and smartphone interface connections in certain 2024-2025 models. A solution is expected by Q2 2026, and component replacement is not recommended as it will not resolve the problem.
2024-2025 Audi MIB3: No Tiles in Main Menu, Phone Controls Not Working
This Technical Service Bulletin (TSB 2080958/2) addresses an issue in 2024-2025 Audi vehicles equipped with the MIB3 infotainment system where owners may find 'no tiles in main menu' or encounter a phone menu with 'controls are not working'. A software update is available.
2024-2025 Audi MMI Connectivity and Infotainment TSB
Audi Technical Service Bulletin 2079416/4 provides an overview of customer service packages for MLB and MQB vehicles with MIB3 systems, addressing common infotainment and connectivity complaints in 2024-2025 Audi models. Learn about diagnostic steps and related software updates.
2021-2025 Audi Q8/SQ8/RS Q8 Window Reversal TSB
If your 2021-2025 Audi Q8, SQ8, or RS Q8 window opens again after attempting to close it, Technical Service Bulletin 2080696/1 details a software issue. This TSB addresses the diagnostic trouble code B148754 related to the window regulator and provides a software update.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.