2010-2026 Audi FMC Software Update Guide

Background on Software Updates

Audi Technical Service Bulletin (TSB) 2047812/8, released on October 7, 2025, provides crucial information for dealerships regarding vehicle software updates. It explains the transition from the decommissioned SD Creator system to the new Flash Media Center (FMC).

This change ensures that Audi vehicles from model years 2010 to 2026 can receive necessary software updates. These updates are vital for maintaining and improving the functionality of the driver information system (DIS), multi-function display (MFI), and multimedia interface (MMI).

Repair Procedure Summary

This TSB focuses on the procedural changes for dealerships to perform Audi FMC software updates. The core of the bulletin is to guide technicians on setting up and utilizing the new Flash Media Center (FMC) system. This system replaces the older SD Creator, which has been decommissioned.

Technicians must use a VAS tester equipped with ODIS Service at the dealership. For specific hardware like the 6150A, an external USB-to-SD card reader is required due to the internal slot's slow read rate. Valid MirrorServer Certificates are also essential for the VAS tester to function correctly with ODIS Service.

Software update files are downloaded onto a blank USB or SD card, with each update requiring a separate card. The specific part number for the software update can be found in the TSB itself or within the ETKA system.

Required Tools and Equipment

To perform Audi FMC software updates effectively, technicians need specific tools and resources:

• ODIS Service with VAS Tester: The primary diagnostic tool for running the FMC software.
• USB-to-SD Card Reader: Necessary when using a 6150A VAS tester, as its internal SD card slot is too slow for FMC operations. Ensure the adapter is at least USB 2.0 compliant.
• Valid MirrorServer Certificate: Must be installed and current on the VAS tester.
• Blank USB or SD Card: With sufficient capacity for downloading software update files. Each update requires a dedicated card.
• Software Update Part Number: This number, found in the TSB or ETKA, identifies the specific software to be installed.

Dealership IT administrators may need to assist with the installation and setup of the FMC. References such as AOS-25-50 SD Creator Decommissioned and AOS-25-48 Flash Media Creator (FMC) for D3 Edgebox provide further guidance.

Owner Information

This Technical Service Bulletin primarily concerns the internal processes for Audi dealerships. As an owner, you will not directly interact with the Flash Media Center (FMC) system. However, this ensures that your vehicle can receive the latest software updates for its information, navigation, communication, and entertainment systems.

If you experience any issues with your vehicle's DIS, MFI, or MMI functionality, or if you believe a software update is needed, please contact your authorized Audi dealership. They are equipped with the necessary tools and information, including the new FMC system, to diagnose and address any software-related concerns.

Source: NHTSA ID 11025264