2022 Audi New Vehicle Condition Report Guide

Audi has issued a Vehicle Condition Report, effective March 25, 2021, which serves as a comprehensive pre-delivery inspection (PDI) guide for all 2022 Audi models. This document, identified as NHTSA ID 10189527, outlines critical steps that dealerships must complete within 48 hours (two business days) of receiving a new vehicle. The goal is to ensure every new Audi meets the brand's quality standards and is fully prepared for the customer.

This report is crucial for ensuring the proper setup and initial condition of new vehicles, including the Audi e-tron pre-delivery inspection. It covers everything from removing protective packaging to verifying essential components and setting up vehicle systems correctly.

Initial Vehicle Inspection Checklist

This section details the mandatory checks and procedures for technicians during the initial vehicle inspection:

• Transportation Cover Removal: Technicians must remove the full body cover, if installed, following the guidelines specified in TSB 2009967. This task is explicitly noted as a "two-person task" to ensure safety and prevent damage during removal. After the cover is off, the vehicle must be thoroughly checked for any transportation damage.
• Wheel Cover Removal and Inspection: Any transportation wheel covers must be removed. Following this, a detailed inspection for transportation damage on the wheels and surrounding areas is required.
• Key Verification: All vehicle keys must be accounted for and included with the vehicle. This ensures the customer receives all necessary access devices.
• Audi Connect Vehicle Code Tag: For specific models, including the e-tron, A4, S4, A5, S5, RS 5, A6, S6, A7, S7, A8, Q5, Q7, and Q8, the plastic "Audi connect Vehicle Code Tag" must be verified as included. This tag is essential for activating Audi's connected services.
• Exterior Surface Inspection: A meticulous inspection of all painted surfaces, molding, and glass is required. Any paint defects or damage to the body must be reported immediately, and arrangements for repair should be made as soon as possible to maintain the vehicle's pristine condition.
• Tire Pressure Settings: Tire pressures must be set to the maximum recommended values listed on the B-pillar doorjamb. These values should then be stored in the Car/System menu. However, if the vehicle is a sold unit awaiting customer pickup, the tire pressures should be set to the "Normal Load Condition Tire Pressures" as specified in the chart found on ServiceNet. This distinction is vital for optimal performance and customer satisfaction.
• Battery Performance Test: A battery test must be performed, and the results attached to the report. This confirms the battery's health and readiness for service.
• Fueling Requirements: Except for Q3, e-tron vehicles, and TT models, all new Audi vehicles must be fueled with 91 Octane or higher gasoline. This ensures the engine receives the correct fuel type for its specifications.
• e-tron Charging: For all e-tron (all EV models), vehicles must be charged to greater than 80% capacity. This ensures the electric vehicle is ready for immediate use upon customer delivery, reflecting the specific needs of the Audi e-tron pre-delivery inspection.

Certification of Completion

Upon completing all listed operations, the technician must certify that the vehicle has been prepared in accordance with Audi Procedures and Quality Standards. This final step confirms that the new vehicle has undergone all necessary checks and adjustments, ensuring it meets the high expectations for a new Audi.

This comprehensive checklist ensures that every new Audi, including the 2022 Audi e-tron, receives a thorough pre-delivery inspection, addressing all critical aspects from physical condition to system readiness before it reaches the customer.

NHTSA ID: 10189527