Service Bulletin

2025-2026 Audi Key Fob LED Not Flashing TSB 2076136/2

Audi Technical Service Bulletin 2076136/2 addresses concerns about the key fob LED not flashing when a button is pressed in 2025-2026 Audi A5, A6, Q5, and Q6 models. This TSB clarifies that this behavior is normal under certain conditions and does not indicate a fault, preventing unnecessary…

ByAhmet Topcu — Founder & Editor-in-Chief2026 Audi A6
2026 Audi A6 — Audi key fob LED not flashing
Editorial illustration generated for this article.
Audi key fob LED not flashingkey fob LED does not flash2076136/220761362076136/1Audi A5 key fobAudi S5 key fobAudi Q5 key fobAudi SQ5 key fobAudi A6 key fob
Audi A5
2025–2026
Audi Q5
2025–2026
Audi S5
2025–2026
Audi SQ5
2025–2026

Audi has released Technical Service Bulletin (TSB) 2076136/2 to clarify a common observation among owners of certain 2025-2026 models: the key fob LED not flashing when a button is pressed. This bulletin, a revision of the initial publication 2076136/1 dated November 26, 2024, aims to inform both technicians and customers that this behavior is typically normal and does not require any repair.

This informational TSB applies to a range of 2025-2026 Audi vehicles, including the A5 (FU), S5 (FU), Q5 (GU), Q5 Sportback (GU), SQ5 (GU), SQ5 Sportback (GU), A6 Sportback e-tron (GH), S6 Sportback e-tron (GH), Q6 e-tron (GF), Q6 Sportback e-tron (GF), SQ6 e-tron (GF), SQ6 Sportback e-tron (GF), and A6 (FN) models. If you notice your Audi key fob LED not flashing, this document provides crucial insight.

Understanding Your Audi Key Fob LED

Modern Audi vehicles, particularly those built on the Premium Platform Electric (PPE) and Premium Platform Combustion (PPC) architectures, utilize advanced key fob technology. Unlike older systems where an LED might flash with every button press regardless of vehicle interaction, these newer key fobs are designed to provide feedback only after successful communication with the vehicle has taken place. This design choice is a technical evolution aimed at optimizing system performance and potentially battery life.

The Symptom: "The LED in the key does not flash when a button on the key is pressed."

Owners of affected 2025-2026 Audi models may observe that pressing a button on their remote control key does not always result in the LED indicator flashing. This specific observation is the core concern addressed by Audi TSB 2076136/2. It's a natural reaction for owners to assume this indicates a problem, such as a faulty key or a low battery, especially if they are accustomed to different behavior from previous vehicles.

Why This Is Normal Behavior

Audi's technical background for TSB 2076136/2 explains that the LED in the key fob is designed to flash only after successful communication with the vehicle. Therefore, if the key is not within range of the vehicle, or if there is a temporary communication issue between the key and the vehicle, the LED will not flash. This is not an indication of a malfunction. The TSB explicitly states that if the Audi key fob LED not flashing, it is not necessarily indicative of a faulty key or a drained key battery.

This information may also be presented differently in your vehicle's Owner's Manual, so it's always a good idea to consult that resource for general key fob operation details specific to your model year.

Important Warnings for Owners and Technicians

Audi's TSB 2076136/2 includes critical directives to prevent unnecessary service and costs:

  • "Do not perform any repairs. Any repairs for this concern may be denied."
  • "Instruct the customer that this condition is normal."

These warnings are paramount. They mean that if your 2025-2026 Audi key fob LED not flashing, and this is the only symptom, technicians should not attempt to diagnose or repair the key fob. Attempting repairs for this normal condition could lead to denied warranty claims and unnecessary expenses for the owner. It reinforces that this is expected operational behavior for these advanced key systems.

What Owners Should Know

If you own a 2025-2026 Audi A5, A6, Q5, or Q6 and notice your Audi key fob LED not flashing when you press a button, rest assured that, according to TSB 2076136/2, this is likely normal behavior. There is no repair needed for this specific condition. This TSB is informational only and does not apply to any Audi Warranty claims.

While this TSB clarifies the LED behavior, if you experience other issues with your key fob, such as the vehicle not locking or unlocking, or the car failing to start, then those symptoms would warrant a visit to an authorized Audi service center for diagnosis. However, for the sole observation of the LED not flashing, no action is required.


Source: NHTSA ID: 11029381, Transaction No.: 2076136/2

Frequently Asked Questions

Why is my 2025-2026 Audi key fob LED not flashing?
According to Audi TSB 2076136/2, the LED on your key fob for 2025-2026 Audi A5, A6, Q5, and Q6 models only flashes after successful communication with the vehicle. If the key is out of range or there's a temporary communication issue, the LED will not flash, which is considered normal behavior.
Does a non-flashing key fob LED mean my Audi key is faulty or has a drained battery?
No, not necessarily. Audi Technical Service Bulletin 2076136/2 explicitly states that if the "LED in the key does not flash when a button on the key is pressed," it is not necessarily indicative of a faulty key or a drained key battery for the affected 2025-2026 models.
What should I do if my 2025-2026 Audi key fob LED does not flash?
You should do nothing. Audi TSB 2076136/2 advises that no repairs should be performed for this condition, and customers should be informed that this behavior is normal. This prevents unnecessary service visits and potential costs.
Is the issue of the Audi key fob LED not flashing covered under warranty?
No. Audi TSB 2076136/2 is an informational bulletin and is not applicable to any Audi Warranty. Since the condition is considered normal operation, there is no defect to be covered.

Related Articles

2025-2026 Audi Drive System Fault DTC P119A00 P119B00

Audi has issued Technical Service Bulletin 2081542/1 for 2025-2026 A6, S5, and SQ5 models experiencing a 'Drive system fault' and storing DTCs P119A00 or P119B00. This is a known software issue, and a solution is anticipated by Q2 2026. Owners are advised against component replacement.

2025-2026 Audi Rear Lid Malfunction TSB 2081508/1

Audi has released Technical Service Bulletin (TSB) 2081508/1, a Pending Service Solution (PSS 55), concerning a rear lid malfunction in certain 2025-2026 Audi A5, S5, Q5, SQ5, and A6 models. Owners may experience the rear lid not opening or closing fully, or closing too quickly. This TSB outlines…

2025-2026 Audi Software Update 03.11.00/C Overview

Audi TSB 2081477/1 details the planned introduction dates for the combined software update 03.11.00/C PPE/PPC KD2 for various 2025-2026 Audi models. This informational bulletin outlines new software versions and affected platforms.

2025-2026 Audi Radiator Fan Fault P1A7B00 TSB

Audi has released Technical Service Bulletin 2081427/1 to address a check engine light (MIL) and unusual radiator fan behavior, often accompanied by DTC P1A7B00, in certain 2025-2026 A5, S5, Q5, SQ5, and 2026 A6 models. The fix involves configuring the HCP4 control unit.

2025-2026 Audi Time Changes Automatically While Driving

Audi has issued Technical Service Bulletin 2081404/1 addressing a software issue in 2025-2026 A5, Q5, and A6 models where the vehicle's clock automatically changes by an hour while driving. This TSB explains that a permanent fix is expected by late 2026, and no component replacement is needed.

Comments

Be the first to comment.

Leave a comment

Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.

Verifying you are human...