2021 Audi A5/S5/RS 5 Pre-Delivery Inspection Checklist
This document outlines the comprehensive Pre-Delivery Inspection (PDI) for 2021 Audi A5, S5, and RS 5 models, ensuring vehicles meet Audi's quality standards before customer delivery. It also includes critical information regarding the Audi Phone Box.

También aplica a
- Audi RS 5
- 2021
- Audi S5
- 2021
Audi's Pre-Delivery Inspection (PDI) is a crucial step to ensure every new vehicle meets stringent quality standards before it reaches the customer. For the 2021 Audi A5, S5, and RS 5 models, this involves a detailed checklist covering numerous vehicle systems and features. This comprehensive inspection ensures that all components are functioning correctly and that the vehicle is prepared for optimal performance and safety.
The 2021 Audi A5 Pre-Delivery Inspection process is performed by a certified Audi technician and includes checks ranging from basic functionality to advanced technological systems. The goal is to provide a seamless and high-quality ownership experience right from the start.
Key Inspection Areas for 2021 Audi A5, S5, RS 5
The PDI for the 2021 Audi A5, S5, and RS 5 covers a wide array of checks, ensuring every aspect of the vehicle is in perfect condition. These checks are categorized to ensure thoroughness and adherence to Audi's quality standards.
Vehicle Preparation
This section includes verifying open campaigns and updates, ensuring the Audi phone box customer registration form is present, and adding the serial number, FCC ID, and model from Elsa (if equipped). Technicians also perform any open campaigns and diagnostic work, and install the front license plate carrier if necessary. Specific guidance is provided in TSB 2051720 for phone box registration.
Interior and Exterior Checks
Inside the vehicle, technicians verify the operation of all seat belts, windows, locks, mirrors, interior lights, and climate control. They also check heated and ventilated seats, power outlets, the glove compartment, panoramic sunroof, and the Passenger Occupant Detection System. For the exterior, checks include all key buttons and features, and a thorough inspection for any damage like dings, dents, or scratches, which must be reported and repaired.
Lighting, Windshield, and Trunk
Exterior lighting functions are tested, and windshield washers are checked for correct aim. In the trunk, the operation of the trunk itself and the emergency release handle are verified. Technicians also ensure the wheel bolt cover removal tool is in the PDI kit, the tool kit is securely installed, and the spare tire pressure and battery clamp torque are correct.
Vehicle Settings and Infotainment
Critical settings are configured, including verifying MMI® touch operation, setting the time source to "GPS" with auto daylight savings, and configuring language and measurement units. The Speech Dialog System is checked, and parking aid settings like "Entertain. Fad." and "Music volume while parking" are adjusted. Navigation dealership location is set, and Manual Speed Warning is turned off. For Media / Radio / SAT, checks include aux input, SD card slot function, HD Radio status, and confirming SiriusXM is active and operational.
On-Hoist Inspection and Driving Performance
During the on-hoist inspection, transport suspension blocks are removed, and the steering, boots, brake system, hoses, tires, and wheels are checked for damage. Technicians look for fluid leaks and loose components, install wheel locks and bolt covers, and set tire pressures. Driving performance checks include horn operation, electronic parking brake, engine Start-Stop System functionality, engine performance, transmission operation, braking, steering/tire alignment, and checking for squeaks, rattles, or wind noise. Radio reception in AM/FM/SiriusXM® bands is also verified.
Convertible Functionality and Driver Assistance
For convertible models, the operation of the power folding top and the presence of manual closing tools are verified. Driver assistance systems such as cruise control, ACC with Stop & Go, Audi side assist, Audi active lane assist, parking system, and Head-up display functionality are all checked. Navigation is activated, and directions are followed back to the dealership.
Post-Road Test Inspection and Audi connect®
After a road test, the SOS button and Roadside assistance button LED status are checked. It's important to note that it may take up to 20 minutes for the emergency call system to activate after transport mode deactivation, and the vehicle cannot be delivered until this function is successfully activated. Fault memory is interrogated, and the Diagnostic Log is uploaded. Service intervals, engine oil level, and all fluid levels are verified and topped off as needed. Finally, the yellow tire pressure tag is installed on the steering wheel, and a showroom charger is applied to maintain battery charge. For Audi connect® (USA ONLY), technicians turn on the Wi-Fi® hotspot and enable satellite map view for navigation.
Important Audi Phone Box Information
The Audi Phone Box is subject to specific Federal Communications Commission (FCC) requirements. Owners of 2021 Audi A5, S5, and RS 5 models equipped with this feature must be aware of the following critical information:
- "This is a CONSUMER device."
- "BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent." Most wireless providers consent to the use of signal boosters, but some may not. If unsure, contact your service provider.
- "You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person."
- "You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider."
- "WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device."
These warnings are crucial for proper and legal operation of the Audi Phone Box. Further details regarding phone box registration can be found in TSB 2051720.
Ensuring a Perfect Delivery
Upon completion of all PDI tasks, the certified Audi technician signs off, certifying that all operations have been completed in accordance with Audi Procedures and Quality Standards. This ensures that the 2021 Audi A5 Pre-Delivery Inspection process has been fully met, guaranteeing a "Perfect Delivery" for the customer.
NHTSA ID: 10180048
Frequently Asked Questions
- What is the purpose of the PDI for my 2021 Audi A5?
- The Pre-Delivery Inspection (PDI) for your 2021 Audi A5, S5, or RS 5 is a comprehensive checklist performed by a certified Audi technician to ensure all vehicle systems, settings, and features are correctly prepared and meet Audi's quality standards before customer delivery. This includes checks on everything from interior functions to driver assistance systems.
- What should I know about the Audi Phone Box in my 2021 Audi S5?
- If your 2021 Audi S5 is equipped with the Audi Phone Box, it is considered a "CONSUMER device." You "MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent" before use. There are also specific requirements for antenna installation and warnings about potential inaccuracies in E911 location information, as detailed in TSB 2051720.
- Does the 2021 Audi A5 Pre-Delivery Inspection cover infotainment systems like MMI touch and SiriusXM?
- Yes, the 2021 Audi A5 Pre-Delivery Inspection includes detailed checks for infotainment systems. This involves verifying the operation of MMI® touch, setting the time source and daylight savings, and confirming that SiriusXM is active and in an active state, allowing channels to be scrolled and music to be heard.
- Are there any specific warnings for owners related to the PDI or vehicle delivery?
- Yes, for safety and proper functionality, the PDI document states that the vehicle "cannot be delivered to the customer if the emergency call function has not been successfully activated." This system may take up to 20 minutes to activate after transport mode deactivation, and its LED must turn green.
Related Articles
2021-2026 Audi Cracking/Creaking Noises During Load Changes TSB
Audi has issued Technical Service Bulletin 2062633/6 to address cracking and creaking noises that may occur in 2021-2026 Audi models during vehicle load changes or severe body torsion. This TSB outlines a repair for a loose bonded joint in the subframe connection.
2020-2021 Audi MIB3 Favorites, Destinations Deleted TSB
This Technical Service Bulletin (TSB) 2079619/1 addresses a software issue in 2020-2021 Audi A4, A5, S4, S5, and RS5 models where the MIB3 system sporadically deletes last destinations, favorites, and home addresses. A software update is required to resolve this problem.
2021-2025 Audi Cracking/Creaking Noises TSB 2062633/4
Audi has issued TSB 2062633/4 to address cracking/creaking noises in 2021-2025 models. This noise, often heard during load changes or body torsion, originates from a loose bonded joint in the subframe. The TSB outlines a repair procedure involving a modified longitudinal member and cavity sealing.
2021-2025 Audi A4/A5 Engine Coolant Temperature Sensor TSB
This Technical Service Bulletin (2078939/1) from Audi addresses a specific diagnostic trouble code, P218500, related to the Engine Coolant Temperature Sensor 2 Circuit High. Owners may notice the exhaust emissions warning lamp (MIL) illuminating on the instrument cluster.
2021-2026 Audi Camera Part Return Notice SM 15-2025
Audi's Special Notice SM 15-2025 instructs dealers to return specific camera part numbers that are not "generation 03S" by March 18, 2025, to ensure customers receive correct parts.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.