
The 2025 Tesla Cybertruck currently has no reported recalls, owner complaints, or federal investigations. However, Tesla has issued several service bulletins addressing issues like halfshaft bolt grinding, door shaking, and illegible emission labels.

Tesla Cybertruck owners may experience a loud grinding noise due to loose halfshaft bolts. Tesla Service Bulletin SB-26-40-001 R1 outlines inspection and replacement procedures for these bolts, and potentially the hub and halfshaft, to resolve the issue.

Tesla has issued Service Bulletin SB-25-10-002 for 2025 Cybertruck vehicles experiencing low-pitched booming, shaking, rattling, or vibrations from the door assemblies and LH side mirror at high speeds. The repair involves applying new adhesive to reinforcement brackets and installing butyl pads.

A service bulletin (SB-25-19-001) has been issued for the 2025 Tesla Cybertruck regarding Vehicle Emission Control Information labels that were printed with illegible text. This non-safety-related condition requires replacement of the label by a Tesla service center.
I am submitting this complaint regarding two serious safety-related failures with my Tesla Cybertruck: a braking-system malfunction and a rear suspension/subframe failure at approximately 12,500 miles. The vehicle previously experienced a significant braking problem that required repair by an authorized Tesla Service Center. The initial repair did not properly resolve the issue, requiring the vehicle to return for additional service. Because the problem involved the braking system, I was concerned about the vehicle's ability to stop safely and predictably, creating a risk of a serious collision. Tesla's service records should document the diagnosis, repairs, and any related fault codes. At approximately 12,500 miles, the vehicle experienced a major failure involving the rear suspension/subframe. The rear suspension separated/dropped in relation to the subframe, causing significant damage. Tesla inspected the vehicle and performed extensive repairs involving the rear subframe, including component/part number 1250562-00-E. This failure created a serious safety risk because the rear suspension/subframe affects vehicle stability, wheel positioning, handling, and control. If this failure had occurred while traveling at highway speed, it could have caused loss of control, a serious collision, injury, or death. Due to the condition of the vehicle, I had it towed rather than driving it. To my knowledge, there was no meaningful advance warning that a major suspension/subframe failure was about to occur. Tesla should have diagnostic logs, photographs, technician findings, repair records, and information concerning the failed components. I also have photographs and service documentation. Having experienced both a braking-system problem and a major suspension/subframe failure at low mileage has caused serious concerns regarding the safety of this vehicle. I am requesting that NHTSA investigate whether similar failures have occurred in other Cybertrucks.
No injuries · No fire · No crash
My 2025 Tesla AWD Cybertruck's rear driver 20" wheel came loose, creating a loud banging noise. The wheel nuts on 2 of the studs worked finger-loose, and one of the studs broke off the hub. The truck had 9000 miles on the odometer. Tesla's service dept blamed me for improperly rotating the tires, but I had never removed or replaced them.
No injuries · No fire · No crash
Interior factory component off-gassing causes a recurring residue film on the internal glass of the forward-facing camera, completely blinding the vehicle's primary safety systems and FSD. Tesla Service refuses to rectify the defect under warranty, calling it standard maintenance, forcing owners to drive with compromised driver-assist features or pay recurring out-of-pocket fees.
No injuries · No fire · No crash
The vehicle's rear structural Giga Casting sustained severe structural failure, exhibiting two distinct cracks following an impact. The vehicle and the damaged casting are fully available for inspection upon request at my current location/service center. The safety risk is extreme. The Giga Casting is a core load-bearing structural component of the vehicle. Cracking in this area severely compromises the vehicle's structural integrity. If the vehicle continues to be driven, any subsequent minor impact or even routine road vibrations could lead to a catastrophic structural collapse, complete loss of vehicle control, or unpredictable battery pack intrusion, putting my life and other road users at severe risk. the structural cracks on the Giga Casting have been inspected and confirmed by the Tesla Service Center and I been told by the technician the casting is very easy to get damaged. When the accident happened the most cybertruck get damaged in the casting
No injuries · No fire · No crash
The contact owns a 2025 Tesla Cybertruck. The contact stated that while pulling into a charging station with the self-driving system activated, the vehicle stopped in front of the payment pole; however, the vehicle inadvertently accelerated through the barrier gate arm, and the arm was fractured. The barrier scratched the passenger’s side bumper. A police report was not filed. There were no injuries sustained. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 13,000.
No injuries · No fire · No crash
Tesla, Inc. (Tesla) is recalling certain 2024-2026 Cybertruck vehicles operating software prior to 2025.38.3. The vehicle controller software may cause the front parking lights to be too bright and exceed the maximum light output, adversely affecting the vision of other drivers. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Tesla, Inc. (Tesla) is recalling certain 2024-2025 Cybertruck vehicles. The light bar can delaminate and detach from the vehicle.