Servis Bülteni

2021-2026 Jeep/Dodge Suspect Brake Pad Kits Identified

Mopar has issued a Quality Inspection Request (NHTSA ID 11025724) for specific rear and front disc brake pad kits. These kits, identified by part numbers 1BP00270AB, 1BP00308AB, 1BP00328AB, 1BP00400AB, and 1BP00454AB, are considered suspect if packaged before August 22, 2025. This affects…

Byeditor sarah mitchell2026 Jeep Wrangler
2026 Jeep Wrangler — manufacturer_communication document image 1
Source: NHTSA manufacturer_communication 11025724
11025724Quality Inspection Requestsuspect brake padsMopar brake pads1BP00270AB1BP00308AB1BP00328AB1BP00400AB1BP00454ABpackaging date code
Jeep Wrangler
2021–2025
Dodge Challenger
2021–2023
Dodge Charger
2021–2023

Mopar has initiated a Quality Inspection Request, documented under NHTSA ID 11025724, concerning certain rear and front disc brake pad kits. This communication, primarily directed at dealerships, aims to identify and remove potentially suspect parts from the supply chain before they are installed in vehicles. The Jeep Wrangler brake pad issue, along with similar concerns for other Dodge models, highlights Mopar's proactive approach to maintaining product quality.

This request specifies particular brake pad kit part numbers that are considered suspect if their packaging date code indicates they were produced before a critical cutoff date. Dealers are instructed to inspect their inventory and return affected parts to ensure that only compliant components are used for service and new vehicle preparation.

What is a Quality Inspection Request?

A Quality Inspection Request (QIR) is a manufacturer's internal communication to its dealerships or parts distribution network. Unlike a formal safety recall, which directly notifies vehicle owners of a known defect, a QIR is typically a proactive measure to address potential quality concerns with parts before they lead to widespread issues or are installed in vehicles. It serves as an early warning system for the manufacturer to manage inventory and prevent future problems.

In this instance, the QIR for the Jeep Wrangler brake pad issue indicates that Mopar has identified a potential quality deviation in certain brake pad kits. This could relate to manufacturing processes, material specifications, or other factors that might affect the performance or longevity of the brake pads. By issuing this request, Mopar aims to contain any potential problem at the dealer and parts distribution level.

Affected Brake Pad Kits and Identification

The Quality Inspection Request specifically targets several Mopar brake pad kit part numbers. These include:

  • 1BP00270AB
  • 1BP00308AB
  • 1BP00328AB
  • 1BP00400AB
  • 1BP00454AB

To identify whether a specific brake pad kit is suspect, dealers must check the packaging date code. The critical date for these parts is August 22, 2025. Any brake pad kit with one of the listed part numbers that was packaged before this date is considered suspect and must be returned. The packaging date code is typically printed on the part's packaging, often in a YYYY/MM/DD format, as illustrated in the communication.

Why This Matters for Owners

While this communication is internal to Mopar and its dealers, it has direct implications for vehicle owners. Brake pads are a critical safety component, directly impacting a vehicle's stopping power. If suspect brake pads were to be installed, there could be various potential consequences, including:

  • Reduced Braking Performance: The pads might not perform as expected, leading to longer stopping distances or diminished braking effectiveness.
  • Premature Wear: The brake pads could wear out faster than designed, requiring earlier replacement and additional maintenance costs.
  • Increased Noise or Vibration: Faulty pads might cause abnormal noises (squealing, grinding) or vibrations during braking.
  • Uneven Wear: This could lead to damage to other braking components, such as rotors.

For owners of affected vehicles, understanding this Jeep Wrangler brake pad issue is crucial, especially if they have recently had brake service or are considering it. Ensuring that only quality-inspected parts are installed is paramount for vehicle safety and reliability.

Dealer Actions and Inventory Management

Mopar's communication provides clear instructions for dealerships to manage their inventory of these brake pad kits. Dealers are required to:

  1. Check Stock: Immediately inspect all current stock of the specified part numbers.
  2. Identify Suspect Parts: Use the packaging date code to determine if any kits were packaged before August 22, 2025.
  3. Return Suspect Parts: All identified suspect parts must be returned to the facing depot using Return Code 02. The deadline for these returns is December 8, 2025.
  4. Place New Orders: Dealers are instructed to place new orders for replacement brake pad kits to ensure they have compliant parts available for service and new vehicle preparation.
  5. Manage Open Orders: Any open orders for these part numbers that are still in process must also be returned if they fall within the suspect date range.

This rigorous process ensures that the supply chain is purged of potentially problematic components, safeguarding the quality of repairs and new vehicle deliveries. Dealers are also advised that vehicles cannot be delivered until any necessary updates or part replacements using compliant components are completed.

What Owners Should Do

Given that Mopar is NOT notifying consumers directly about this Quality Inspection Request, owners of 2021-2026 Jeep Wrangler, 2021-2023 Dodge Charger, and 2021-2023 Dodge Challenger vehicles should be proactive. If you have recently had your brake pads replaced or are planning to, it is advisable to:

  • Contact Your Dealership: Inquire with your authorized Mopar service center about this Quality Inspection Request (NHTSA ID 11025724) and the specific brake pad part numbers. Ask if your vehicle's brake service involved any of the suspect part numbers.
  • Monitor Brake Performance: Pay close attention to any changes in your vehicle's braking performance, such as unusual noises, vibrations, or reduced stopping power. If you notice any of these symptoms, have your vehicle inspected by a qualified technician immediately.
  • Confirm Part Origin: When having brake service performed, you can request that your dealer confirm the origin and packaging date of any Mopar brake pads being installed.

This proactive approach will help ensure that your vehicle's braking system is equipped with components that meet Mopar's quality standards, mitigating any potential Jeep Wrangler brake pad issue.

Important Warnings

As stated in the manufacturer's communication, Mopar is NOT notifying consumers regarding this Quality Inspection Request. This means vehicle owners will not receive a letter or direct communication about this issue. Owners must proactively inquire with their dealerships if they have concerns or experience any brake-related issues.


Source: NHTSA ID: 11025724

Galeri

4 görsel

Frequently Asked Questions

What is the Mopar Quality Inspection Request for brake pads?
This is an internal communication from Mopar (NHTSA ID 11025724) to dealerships, instructing them to identify and return specific rear and front disc brake pad kits that are considered suspect due to their packaging date. It's a proactive measure to ensure quality before parts are installed in vehicles.
Which brake pad part numbers are affected by this issue?
The affected Mopar brake pad kit part numbers are 1BP00270AB, 1BP00308AB, 1BP00328AB, 1BP00400AB, and 1BP00454AB. These parts are considered suspect if their packaging date code indicates they were packaged before August 22, 2025.
How can I tell if my vehicle has suspect brake pads or is impacted by the Jeep Wrangler brake pad issue?
As an owner, you typically cannot identify this directly. The identification relies on the packaging date code, which is checked by dealerships. If you own a 2021-2026 Jeep Wrangler, 2021-2023 Dodge Charger, or 2021-2023 Dodge Challenger and have had recent brake service, you should contact your dealership and inquire about this Quality Inspection Request (NHTSA ID 11025724) and the part numbers.
What should I do if I suspect my vehicle has these brake pads?
Since Mopar is not notifying consumers, it's important to be proactive. If you have concerns or experience any unusual brake performance, contact your authorized Mopar dealership. Mention the NHTSA ID 11025724 and ask them to check if any suspect brake pad kits were installed on your vehicle.
Is this Quality Inspection Request the same as a recall?
No, this is not a formal safety recall. A Quality Inspection Request is an internal manufacturer action to manage parts inventory and prevent potential issues before they reach consumers. Recalls are typically issued when a safety defect has been identified in vehicles already on the road, and owners are directly notified.

Related Articles

2026 Jeep Wrangler Problems: Recalls, Complaints & TSBs

The 2026 Jeep Wrangler faces a recall for insufficient child seat anchor welds, alongside numerous service bulletins addressing issues like unresponsive power tops, degrading steering alignment, heated steering wheel malfunctions, and driver assistance system errors. This profile details known…

2026 Jeep Wrangler Child Seat Anchor Recall

Chrysler (FCA US, LLC) has issued a recall (NHTSA ID: 26V224000, FCA ID: 27D) for certain 2026 Jeep Wrangler vehicles. The recall addresses insufficient welds on the second-row, right-side child seat tether anchors, which could reduce restraint effectiveness during a crash.

2024-2026 Stellantis UGDO Inoperable TSB 08-134-26

If your 2024-2026 Stellantis vehicle's Universal Garage Door Opener (UGDO) is inoperable or you have questions about its HomeLink® programming, Technical Service Bulletin (TSB) 08-134-26 provides guidance. Learn about DTC B251D1-00 and the recommended steps.

2026 Jeep Wrangler Heated Steering Wheel TSB 08-119-26

A Technical Service Bulletin (TSB 08-119-26) has been issued for the 2026 Jeep Wrangler regarding issues with the heated steering wheel not getting hot enough or not working. The fix involves a software update to the Comfort Seat Wheel Module (CSWM).

2026 Jeep Wrangler DASM Software Update TSB

This TSB, identified as 2026 Jeep Wrangler manufacturer_communication, addresses Driver Assistant System Module (DASM) issues in the 2026 Jeep Wrangler. It covers DTCs like C2206-00 and C2318-49, which can cause warning messages such as 'ACC/FCW Unavailable Service Required'.

Yorumlar

İlk yorum sizden olsun.

Yorum bırakın

Yorumlar moderasyondan geçer ve görünmesi biraz zaman alabilir. Sadece adınız ve soyadınızın baş harfi herkese açık olarak gösterilir.

Robot olmadığınız doğrulanıyor...