Servis Bülteni

2024-2025 Jeep Compass Alternator Wiring Low Torque TSB

Owners of 2024-2025 Jeep Compass vehicles may experience a battery warning light or no-start condition due to a loose alternator B+ cable connection. Technical Service Bulletin 08-181-25 outlines a simple repair to tighten the cable to the correct torque specification, covered under warranty.

Byeditor david chen2024 Jeep Compass
2024 Jeep Compass — manufacturer_communication document image 1
Source: NHTSA manufacturer_communication 11019426
TSB 08-181-25RSU 25-105Failure Code ZYBattery light is illuminated on the Instrument Panel Cluster (IPC)Vehicle does not start due to a depleted batteryLoose alternator cable connectionAlternator B+ cable nutJeep Compass alternator wiringJeep Renegade alternator wiringJeep Commander alternator wiring
Jeep Compass
2025
Jeep Renegade
2024

Owners of certain 2024-2025 Jeep Compass vehicles may encounter issues with their vehicle's charging system, manifesting as a battery warning light or an inability to start. This problem is addressed by Technical Service Bulletin (TSB) 08-181-25, which identifies a specific manufacturing concern related to the alternator wiring.

Symptoms

Owners might observe one or both of the following symptoms, indicating a problem with the Jeep Compass alternator wiring:

  • The battery light is illuminated on the Instrument Panel Cluster (IPC).
  • The vehicle does not start due to a depleted battery.

Cause

The root cause of these symptoms is a loose connection at the alternator B+ cable. This can prevent proper charging of the battery, leading to low voltage conditions.

Repair Procedure Summary

Technical Service Bulletin 08-181-25 outlines a straightforward repair to address the loose alternator cable connection. The procedure involves several steps to ensure the connection is secure and the vehicle's charging system functions correctly. The repair for the Jeep Compass alternator wiring issue is as follows:

  1. The negative battery cable is disconnected and isolated to ensure safety during the repair.
  2. If the vehicle is equipped with an engine cover, it is removed to access the alternator. Detailed instructions for engine cover removal are available in the DealerCONNECT/Service Library.
  3. The alternator B+ cable nut is tightened to the proper torque specification of 10 N·m (8 Ft. Lbs.). Figure 1 in the TSB illustrates the location of this nut.
  4. If removed, the engine cover is reinstalled.
  5. Finally, the negative battery cable is reconnected.

What Owners Should Know

This Technical Service Bulletin (TSB) 08-181-25 has also been released as a Rapid Service Update (RSU) 25-105. All applicable RSU VINs have been loaded into the system. To verify if this service action applies to your specific vehicle, you can use the VIP system or perform a VIN search through DealerCONNECT/Service Library.

All repairs performed under this TSB are reimbursable within the provisions of your vehicle's warranty. It is important to note that after this TSB is applied, it is not necessary to send DID-I or DID-A information.

Owner Action

If you are experiencing the battery light illuminating or your 2024-2025 Jeep Compass is failing to start, it is recommended to contact your authorized Jeep dealership. They can check if your vehicle is covered by TSB 08-181-25 or RSU 25-105 and perform the necessary repair to correct the loose Jeep Compass alternator wiring connection.


Source: NHTSA ID: 11019426

Galeri

2 görsel

Frequently Asked Questions

What are the common symptoms of the alternator wiring issue in my 2024-2025 Jeep Compass?
Owners may notice the battery light illuminated on the Instrument Panel Cluster (IPC) or experience a no-start condition due to a depleted battery. These symptoms are often linked to a loose alternator B+ cable connection.
What is Technical Service Bulletin (TSB) 08-181-25 about?
TSB 08-181-25 addresses a manufacturing concern where the alternator B+ cable nut may be loose, leading to charging system malfunctions. The bulletin provides a repair procedure to tighten this nut to the correct torque specification of 10 N·m (8 Ft. Lbs.).
Is the repair for the loose alternator cable covered under warranty?
Yes, all repairs performed under TSB 08-181-25 are reimbursable within the provisions of your vehicle's warranty. You should contact your dealership to confirm eligibility and schedule service.
Which Jeep and RAM models are affected by the alternator wiring low torque issue?
While the primary focus is on the 2024-2025 Jeep Compass and 2024 Jeep Renegade, the TSB also applies to certain 2024-2026 Jeep Commander and 2024-2026 RAM Rampage vehicles, depending on their specific build dates.

Related Articles

2024 Jeep Compass ACC Module Update TSB 08-161-26

This Technical Service Bulletin (TSB 08-161-26) addresses Malfunction Indicator Lamp (MIL) illumination and Diagnostic Trouble Code C14A4-00 in 2024 Jeep Compass vehicles equipped with Adaptive Cruise Control. The fix involves an ACC module software update.

2024 Jeep Compass ACC Module Update TSB

This technical service bulletin (TSB) addresses issues with the Adaptive Cruise Control (ACC) system in the 2024 Jeep Compass, including diagnostic trouble codes C14A4-00 and C0063-9A, and various warning messages. A software update for the ACC module is available to resolve these concerns.

2022-2025 Jeep Compass Front End Noise TSB

This Technical Service Bulletin (TSB) 19-002-26 addresses a 'front end noise when turning the steering wheel' in 2022-2025 Jeep Compass vehicles. The issue is linked to the tie rod ends, which may require inspection and replacement. This TSB is specifically for the South America market.

2024-2025 Jeep Compass P0115-00 ECT Sensor Malfunction

Jeep Technical Service Bulletin 08-115-26 (also RSU 26-049) details a potential malfunction of the Engine Coolant Temperature (ECT) sensor in 2024-2025 Jeep Compass models. This can lead to a Malfunction Indicator Lamp (MIL) illumination, DTC P0115-00, and an engine overheating warning.

2024-2025 Jeep Compass Park Brake Warning TSB

A manufacturer communication addresses the 'park brake light on' and 'service park brake' messages in 2024-2025 Jeep Compass vehicles, often accompanied by DTCs C10D0, C10ED, or C10CD. The issue is linked to a damaged wiring harness near the TCM bracket.

Yorumlar

İlk yorum sizden olsun.

Yorum bırakın

Yorumlar moderasyondan geçer ve görünmesi biraz zaman alabilir. Sadece adınız ve soyadınızın baş harfi herkese açık olarak gösterilir.

Robot olmadığınız doğrulanıyor...