Kia Optima Service Bulletins (2013)
299 manufacturer communications on file.
- July 28, 2020•Document ID: 10177739Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SC189_DP
- Date Added:
- August 4, 2020
- Manufacturer:
- KIA
SummaryVoluntary Emissions Service Campaign (SC189) - Dealer Principal Memo - Kia Motors America, Inc. is conducting a Voluntary Emissions Service Campaign to install an Auxiliary Canister Kit to improve evaporative system performance on certain 2011-2015 MY Kia Optima vehicles equipped with the 2.4-liter engine manufactured from August 12, 2010 through July 23, 2015. Kia has become aware of some 2011-2015 MY Optima vehicles that may have been produced with evaporative canisters that can cause the vehicle to release air pollutants that exceed Federal and California emissions standards.
Associated Products (5)Associated Documents - July 1, 2020•Document ID: 10177732Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- PI1803YZ_TSB_R3
- Date Added:
- August 3, 2020
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN - ENGINE REPLACEMENT INSTRUCTIONS FOR DTC P1326 (PI1803Y/Z_Rev3) - This bulletin has been revised to include additional information. This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1803, Rev 10, 03/16/2020) titled "Knock Sensor Detection System - ECU Logic Improvement".
Associated Products (10)Associated Documents - June 9, 2020•Document ID: 10176912Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT
- Mfr Comm. #:
- PI1803YZ_TSB_R2
- Date Added:
- July 6, 2020
- Manufacturer:
- KIA
SummaryTSB: PRODUCT IMPROVEMENT CAMPAIGN: ENGINE REPLACEMENT INSTRUCTIONS FOR DTC P1326 (PI1803Y/Z) - This bulletin has been revised to include additional information. This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1803, Rev 10, 03/16/2020) titled "Knock Sensor Detection System - ECU Logic Improvement". Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below return to the dealer with Diagnostic Trouble Code (DTC) P1326 (Knock Signal Range/Performance).
Associated Products (10)Associated Documents - June 3, 2020•Document ID: 10176918Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:APPLIANCE:AIR CONDITIONER; EQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- TSB_CLI049
- Date Added:
- July 6, 2020
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: PARTIAL REPAIR - ELECTRICAL A/C COMPRESSOR - This bulletin provides information regarding partial repair of the Air Conditioning (A/C) compressor assembly on some 2011MY~ Optima (TF HEV, JF HEV/PHEV/EV), Soul (PS EV) and Niro (DE HEV/PHEV/EV) vehicles.
Associated Products (20)Associated Documents - April 30, 2020•Document ID: 10174518Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- TSB_ENG205_C
- Date Added:
- May 5, 2020
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: SERVICE ACTION: WIRING SIGNAL INTERFERENCE CHECK & ENGINE NOISE INSPECTION (SA379) - CLOSED - SUPERSEDED BY PI1802YZ/1803YZ.
Associated Products (23)2018 Kia Optima2018 Kia Sorento2018 Kia Sportage2017 Kia Optima2017 Kia Sorento2017 Kia Sportage2016 Kia Optima2016 Kia Sorento2016 Kia Sportage2015 Kia Optima2015 Kia Sorento2015 Kia Sportage2014 Kia Optima2014 Kia Sorento2014 Kia Sportage2013 Kia Optima2013 Kia Sorento2013 Kia Sportage2012 Kia Optima2012 Kia Sorento+ 3 moreAssociated Documents - April 24, 2020•Document ID: 10174693Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- TSB_CHA091_R2
- Date Added:
- May 5, 2020
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: STEERING GEAR YOKE PLUG AND ASSEMBLY REPLACEMENT - This bulletin has been revised to include additional information. This bulletin provides the procedure to replace the steering gear box yoke plug and assembly on some models listed below, which may exhibit a ticking noise while turning the steering wheel with the vehicle stopped. This condition is caused by a worn lining on the steering gear box yoke assembly.
Associated Products (12)Associated Documents - April 24, 2020•Document ID: 10174520Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB_TRA046_R1
- Date Added:
- May 5, 2020
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: - TRANSMISSION FLUID APPLICATION GUIDE - This bulletin has been revised to include additional information. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, refer to applicable vehicles on page 2. Refer to the shop manual on KGIS for the specific Kia model for the correct transmission fluid check/fill procedures.
Associated Products (98)Associated Documents - April 9, 2020•Document ID: 10174431Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- PI1803YZ_TSB_R1
- Date Added:
- May 5, 2020
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN: TSB - ENGINE REPLACEMENT INSTRUCTIONS FOR DTC P1326 (PI1803Y/Z) - This bulletin has been revised to include additional information.This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1803, Rev 10, 03/16/2020) titled "Knock Sensor Detection System - ECU Logic Improvement". Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below return to the dealer with Diagnostic Trouble Code (DTC) P1326 (Knock Signal Range/Performance).
Associated Products (11)Associated Documents - April 2, 2020•Document ID: 10174430Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- PI1803WX_TSB_R5C
- Date Added:
- May 5, 2020
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN: TSB - ENGINE REPLACEMENT INSTRUCTIONS FOR DTC P1326 (PI1803W/X) - CLOSED - This bulletin has been superseded by PI1803Y/Z.
Associated Products (10)Associated Documents - March 17, 2020•Document ID: 10173258Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- PI1803Y/Z_TSB
- Date Added:
- April 7, 2020
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN: TSB - ENGINE REPLACEMENT INSTRUCTIONS FOR DTC P1326 (PI1803Y/Z) - This bulletin has been revised to include additional information. This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1803, Rev 10, 03/16/2020) titled "ÂÂKnock Sensor Detection System - ECU Logic Improvement"ÂÂ. Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below return to the dealer with Diagnostic Trouble Code (DTC) P1326 (Knock Signal Range/Performance).
Associated Products (10)Associated Documents - March 17, 2020•Document ID: 10173257Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- PI1803_TSB_R5
- Date Added:
- April 7, 2020
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN: TSB - REV 5 -KNOCK SENSOR DETECTION SYSTEM - ECU LOGIC IMPROVEMENT (PI1803) - This bulletin has been revised to include additional information. This bulletin provides information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS) in order to protect the engine from excessive connecting rod bearing damage.
Associated Products (10)Associated Documents - January 21, 2020•Document ID: 10170778Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- TSB_ELE148
- Date Added:
- February 4, 2020
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: HALOGEN HEAD LAMP LOW BEAM BULB CONNECTOR REPLACEMENT - This bulletin provides information regarding the procedure to repair the bulb connector on some 2010MY~ vehicles listed on the table below, which may exhibit a bulb connector concern. To correct this concern, replace the connector with a new and improved part.
Associated Products (76)2020 Kia Niro2020 Kia Optima2020 Kia Sedona2020 Kia Sportage2020 Kia Stinger2019 Kia Cadenza2019 Kia Niro2019 Kia Optima2019 Kia Sedona2019 Kia Soul2019 Kia Sportage2019 Kia Stinger2018 Kia Cadenza2018 Kia Forte2018 Kia Niro2018 Kia Optima2018 Kia Sedona2018 Kia Soul2018 Kia Sportage2018 Kia Stinger+ 56 moreAssociated Documents - January 10, 2020•Document ID: 10170773Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- TSB_CHA091_R1
- Date Added:
- February 4, 2020
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: STEERING GEAR YOKE PLUG AND ASSEMBLY REPLACEMENT - This bulletin has been revised to include additional information. This bulletin provides the procedure to replace the steering gear box yoke plug and assembly on some models listed below, which may exhibit a ticking noise while turning the steering wheel with the vehicle stopped. This condition is caused by a worn lining on the steering gear box yoke assembly. Follow the procedure outlined in this bulletin to replace the steering gear box yoke plug and assembly with updated parts.
Associated Products (16)Associated Documents - December 4, 2019•Document ID: 10169800Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- PI1803_OWN#3_OPT
- Date Added:
- January 4, 2020
- Manufacturer:
- KIA
SummaryOwner Letter - PRODUCT IMPROVEMENT CAMPAIGN (PI1803) - *** THIRD NOTICE *** - Dear Kia Optima Owner: Kia Motors America, Inc. is conducting an important Product Improvement Campaign to perform a software update on all 2011-2013 MY Optima vehicles equipped with 2.4L Gasoline Direct Injection ("GDI") and 2.0L Turbocharged GDI ("T-GDI") engines, and some 2014 MY Optima vehicles equipped with 2.4L GDI and 2.0L T-GDI engines to protect the engine from excessive connecting rod bearing damage. The update will be done free of charge and will only involve the addition of newly developed computer software for the Engine Control Unit ("ECU").
Associated Products (4)Associated Documents - November 26, 2019•Document ID: 10168850Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING; STEERING
- Mfr Comm. #:
- TSBCHA084_R4
- Date Added:
- December 9, 2019
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: PARTIAL REPAIR OF C-MDPS MOTOR, ECU AND/OR STEERING COLUMN HOUSING - This bulletin has been revised to include additional information.This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU) or Steering Column Housing on some 2010MY~ Kia models listed on page 5 equipped with a Column Motor Driven Power Steering (C-MDPS) unit. Follow the MDPS Flowchart (page 2) along with the MDPS DTC Table (page 3) procedure outlined in this bulletin before replacing the C-MDPS Motor, ECU or Steering Column Housing.
Associated Products (79)Associated Documents - November 7, 2019•Document ID: 10168951Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- PI1803WX_TSB_R5
- Date Added:
- December 9, 2019
- Manufacturer:
- KIA
SummaryTSB: PRODUCT IMPROVEMENT CAMPAIGN PI1803W/X_R5: ENGINE REPLACEMENT INSTRUCTIONS FOR DTC P1326 (PI1803W/X) - This bulletin has been revised to include additional information. This bulletin provides information related to the Technical Service Bulletin previously published in November 2018 (PI1803, Rev 1, 01/02/2018) titled "ÂÂKnock Sensor Detection System - ECU Logic Improvement"ÂÂ. Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below returns to the dealer with Diagnostic Trouble Code ("ÂÂDTC"ÂÂ), P1326.
Associated Products (10)Associated Documents - November 7, 2019•Document ID: 10168949Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- PI1803_TSB_R4
- Date Added:
- December 9, 2019
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN - PRODUCT IMPROVEMENT CAMPAIGN PI1803_TSB_R4: KNOCK SENSOR DETECTION SYSTEM - ECU - LOGIC IMPROVEMENT (PI1803) - This bulletin has been revised to include additional information. This bulletin provides information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS) in order to protect the engine from excessive connecting rod bearing damage.
Associated Products (10)Associated Documents - October 15, 2019•Document ID: 10167301Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- TSBCHA084_R3
- Date Added:
- November 7, 2019
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN TSB084_R3: PARTIAL REPAIR OF C-MDPS MOTOR, ECU AND/OR STEERING COLUMN HOUSING - This bulletin has been revised to include additional information.This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU) or Steering Column Housing on some 2010MY~ Kia models listed on page 5 equipped with a Column Motor Driven Power Steering (C-MDPS) unit.
Associated Products (72)Associated Documents - October 14, 2019•Document ID: 10167214Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- PS616
- Date Added:
- November 7, 2019
- Manufacturer:
- KIA
SummaryPITSTOP: LOWER ENGINE SERVICE COVER BOLT LOCATIONS - This Pitstop provides information on the correct bolt location of the lower engine service cover on 2016-2020MY Optima 2.4L and 2.0L equipped vehicles. The lower engine service cover is secured by seven (7) retaining bolts. Installation of the two (2) long bolts in the incorrect location may cause puncture or damage to the oil pan in the event that the vehicle is bottomed out while driving. If the oil pan is damaged or punctured, the engine oil may leak, possibly causing engine damage. This
Associated Products (10)Associated Documents - October 10, 2019•Document ID: 10167227Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- PI1803_TSB_R3
- Date Added:
- November 7, 2019
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN: KNOCK SENSOR DETECTION SYSTEM - ECU LOGIC IMPROVEMENT (PI1803). This bulletin has been revised to include additional information. This bulletin provides information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS) in order to protect the engine from excessive connecting rod bearing damage
Associated Products (10)Associated Documents