Infiniti JX35 Service Bulletins
181 manufacturer communications on file.
- November 3, 2016•Document ID: 10119284Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- REVISION 1-PC451
- Date Added:
- October 15, 2017
- Manufacturer:
- INFINITI
Summary2G Telematics Hardware Replacement Client Satisfaction Initiative The announcement from September 2, 2016 has been revised to include: - The telematics upgrade for 2014-15 Q50 is now available. The procedure and part information has been added to this announcement.. - Second page of Service Comm is not VIN specific, service personnel should check vehicle repair history prior to offering clients an opportunity to upgrade - In lieu of repair history, TCU version can be checked on the information screen (see page 2) Please discard previous versions of this announcement.
Associated Products (15)Associated Documents - November 3, 2016•Document ID: 10119259Service Bulletin/Repair InstructionsVISIBILITY
- Mfr Comm. #:
- ITB16-040a
- Date Added:
- October 15, 2017
- Manufacturer:
- INFINITI
Summary2013 JX35 AND 2014-2015 QX60; DOOR MIRROR WILL NOT RETURN TO SET POSITION AFTER SHIFTING FROM REVERSE TO DRIVE This bulletin has been amended. The Title has been modified, and references to Automatic Drive Positioner have been changed to Seat Control Unit. No other changes have been made. Please discard all previous versions.
Associated Products (3)Associated Documents - October 21, 2016•Document ID: 10120577Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- ITB13-035b
- Date Added:
- October 25, 2017
- Manufacturer:
- INFINITI
SummaryCVT FLUID LEVEL CHECK SERVICE INFORMATION This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard all previous versions of this bulletin.
Associated Products (5)Associated Documents - October 20, 2016•Document ID: 10120576Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- ITB12-011g
- Date Added:
- October 25, 2017
- Manufacturer:
- INFINITI
SummaryTELEMATICS SERVICE INFORMATION This bulletin has been amended. Modifications have been made to include 2017 Q50, Q60, Q70, QX60, and QX80 vehicles. No other changes have been made. Please discard all previous versions of this bulletin.
Associated Products (23)2017 Infiniti Q502017 Infiniti Q602017 Infiniti Q702017 Infiniti QX302017 Infiniti QX602017 Infiniti QX802016 Infiniti Q502016 Infiniti Q702016 Infiniti QX602016 Infiniti QX802015 Infiniti Q502015 Infiniti Q702015 Infiniti QX602015 Infiniti QX802014 Infiniti Q502014 Infiniti Q702014 Infiniti QX602014 Infiniti QX802013 Infiniti JX352013 Infiniti M35+ 3 moreAssociated Documents - October 5, 2016•Document ID: 10120581Service Bulletin/Repair InstructionsVISIBILITY
- Mfr Comm. #:
- ITB16-040
- Date Added:
- October 25, 2017
- Manufacturer:
- INFINITI
Summary2013 JX35 AND 2014 ? 2015 QX60; DOOR MIRROR GLASS WILL NOT RETURN AFTER SHIFTING REVERSE TO DRIVE Applies to vehicles equipped with Automatic Drive Positioner IF YOU CONFIRM The door mirror glass (LH and RH) automatic tilt down-up feature does not return the glass to original position after shifting from reverse to drive. ACTION Replace the Automatic Drive Positioner (ADP) Control Unit. - Use the new part listed in the Parts Information. - Refer to the Electronic Service Manual (ESM), section ADP-Automatic Drive Positioner, for replacement information.
Associated Products (5)Associated Documents - September 29, 2016•Document ID: 10091612Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- PC451_PC452 2G T
- Date Added:
- February 14, 2017
- Manufacturer:
- INFINITI
Summary"PC451_PC452 2G TCU UPDATE - MAIL NOTIFICATION THE PURPOSE OF THIS ANNOUNCEMENT IS TO LET FIELD PERSONNEL KNOW THAT THE FIRST 22K OWNER MAILINGS HAVE BEEN SENT OUT TODAY. THIS FIRST MAILING WAS DIRECTED TOWARDS CURRENT INFINITI CONNECTION SUBSCRIBERS OR TRIAL PARTICIPANTS. THE REMAINING OWNER NOTIFICATIONS WILL BE SENT OUT BETWEEN NOW AND DECEMBER 1, 2016. OWNER NOTIFICATION TIMING FOR Q50 OWNERS IS STILL TBD BASED ON PARTS AVAILABILITY TIMING."
Associated Products (9)Associated Documents - September 28, 2016•Document ID: 10091569Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB12-054B
- Date Added:
- February 14, 2017
- Manufacturer:
- INFINITI
SummaryTHIS BULLETIN HAS BEEN AMENDED. THE TITLE AND IF YOU CONFIRM SECTION HAVE BEEN REVISED. NO OTHER CHANGES HAVE BEEN MADE. PLEASE DISCARD PREVIOUS VERSIONS OF THIS BULLETIN.
Associated Products (28)2013 Infiniti FX372013 Infiniti FX502013 Infiniti G372013 Infiniti JX352013 Infiniti M352013 Infiniti M372013 Infiniti M562013 Infiniti QX562012 Infiniti EX352012 Infiniti FX352012 Infiniti FX502012 Infiniti G372012 Infiniti M352012 Infiniti M372012 Infiniti M562012 Infiniti QX562011 Infiniti EX352011 Infiniti FX352011 Infiniti FX502011 Infiniti G37+ 8 moreAssociated Documents - September 2, 2016•Document ID: 10091613Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- PC451_PC452_PC45
- Date Added:
- February 14, 2017
- Manufacturer:
- INFINITI
Summary"2G TELEMATICS HARDWARE REPLACEMENT CLIENT SATISFACTION INITIATIVE ON FEBRUARY 26TH, 2016 INFINITI ANNOUNCED THAT IT WAS SENDING A REMINDER NOTIFICATION TO CLIENTS AFFECTED BY AT&TS PLANNED DISCONTINUATION OF THE 2G CELLULAR NETWORK. IN JUNE 2016, INFINITI COMMUNICATED INSTRUCTIONS TO RETAILERS TO UPDATE NEW VEHICLES IN THEIR INVENTORY WITH 3G COMPATIBLE TELEMATICS CONTROL UNITS. AT THIS TIME, INFINITI IS BEGINNING THE PROCESS OF MAKING 3G COMPATIBLE HARDWARE AVAILABLE TO OWNERS OF AFFECTED VEHICLES AS IDENTIFIED ABOVE. THIS UPGRADE MAY REQUIRE AN OWNER MAKE A CO-PAYMENT IN ORDER TO RECEIVE THE 3G HARDWARE UPDATE. PLEASE REFER TO THE CHART PROVIDED ON PAGE 2 TO DETERMINE IF AN OWNER CO-PAY IS REQUIRED. THIS CLIENT SATISFACTION INITIATIVE INCLUDES BOTH THE HARDWARE UPGRADE AND A COMPLIMENTARY ONE-YEAR SUBSCRIPTION TO INFINITI CONNECTION PLUS TELEMATICS SERVICE; THIS DOES NOT APPLY TO PC454 (SEE PAGE 2 FOR DETAILS). NOTE: VEHICLE ELIGIBILITY WILL BE VIEWED ON THE SECOND PAGE OF SERVICE COMM (EXCEPT PC454). THIS ACTIVITY IS NOT DISPLAYED ON THE MAIN PAGE OF SERVICE COMM BECAUSE IT IS OPTIONAL FOR CLIENTS TO PARTICIPATE."
Associated Products (9)Associated Documents - August 19, 2016•Document ID: 10091427Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- ITB12-011F
- Date Added:
- February 13, 2017
- Manufacturer:
- INFINITI
Summary"TELEMATICS SERVICE INFORMATION VEHICLES EQUIPPED WITH FACTORY NAVIGATION SYSTEM THIS BULLETIN HAS BEEN AMENDED. MODIFICATIONS HAVE BEEN MADE TO INCLUDE QX30. NO OTHER CHANGES HAVE BEEN MADE. PLEASE DISCARD ALL PREVIOUS VERSIONS OF THIS BULLETIN."
Associated Products (17)Associated Documents - July 27, 2016•Document ID: 10091384Service Bulletin/Repair InstructionsENGINE; ELECTRICAL SYSTEM:IGNITION
- Mfr Comm. #:
- ITB14-011C
- Date Added:
- February 13, 2017
- Manufacturer:
- INFINITI
Summary"REMOTE ENGINE START NOT WORKING THIS BULLETIN HAS BEEN AMENDED. CHANGES HAVE BEEN MADE TO ITEMS 4 AND 13 IN THE SUPPLEMENTAL DIAGNOSIS TABLE. NO OTHER CHANGES HAVE BEEN MADE. PLEASE DISCARD PREVIOUS VERSIONS OF THIS BULLETIN. SERVICE INFORMATION IF A CUSTOMER STATES THE REMOTE ENGINE START (RES) FEATURE OF AN APPLIED VEHICLE IS NOT WORKING, MAKE SURE THE SYSTEM IS PROPERLY SET TO OPERATE: -THE IGNITION IS TURNED OFF -THE SHIFT SELECTOR IS IN PARK (P) -THE HOOD/DOORS/TRUNK LID/LIFT GATE ARE COMPLETELY CLOSED -NO OTHER OF THE VEHICLES INTELLIGENT KEYS (I-KEYS) ARE INSIDE, OR WITHIN STARTING RANGE OF, THE VEHICLE -THE I-KEY/KEY FOB (KEY FOB) IS WITHIN THE OPERATING RANGE OF 197 FT OR 60 M IF THE ABOVE CONDITIONS ARE MET, RES SHOULD WORK. 1. POINT THE KEY FOB AT THE VEHICLE. 2. PRESS THE LOCK BUTTON. 3. PRESS AND HOLD THE RES BUTTON WITHIN FIVE (5) SECONDS OF PRESSING THE LOCK BUTTON UNTIL THE TURN SIGNAL LIGHTS TURN ON. WHENEVER AN APPLIED VEHICLE HAS A CONCERN WITH THE REMOTE ENGINE START (RES) FEATURE NOT WORKING PROPERLY, MAKE SURE TO VERIFY THE INCIDENT BEFORE STARTING ANY DIAGNOSIS AND/OR REPLACING PARTS. FOR A BETTER UNDERSTANDING OF THE RES SYSTEM, REFER TO SECTION 3: ""PRE-DRIVING CHECKS AND ADJUSTMENTS > REMOTE ENGINE START OF THE APPLIED VEHICLES OWNERS MANUAL. WHEN DIAGNOSING RES OPERATION, USE THE SUPPLEMENTAL RES SERVICE INFORMATION AND SUPPLEMENTAL DIAGNOSIS TABLE (STARTING ON PAGE 2) IN ADDITION TO THE ESM."
Associated Products (9)Associated Documents - April 29, 2016•Document ID: 10192817Service Bulletin/Repair InstructionsEQUIPMENT; POWER TRAIN
- Mfr Comm. #:
- ITB15012F
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryIF YOU CONFIRM: The customer reports a transmission judder (shake, shudder, single or multiple bumps or vibration) AND One of these DTCs is stored: - P17F0 (CVT_JUDDER (T/M INSPECTION)) - P17F1 (CVT_JUDDER (C/U INSPECTION)) NOTE - If a transmission judder (as described above) is not reported, this bulletin does not apply. - If either P17F0 or P17F1 are not stored, this bulletin does not apply. - ITB15-010, Enhanced Diagnostic Logic For CVT Judder, has reprogramming instructions that may apply. ACTIONS: Perform the SERVICE PROCEDURE, starting on page 3. - Review the Repair Flow Chart on the next page. NOTE: Essential Tool Tech Cam (borescope) J-51951 has been sent to dealers. This tool?s attachments make CVT inspection possible. See this bulletin for further detail.
Associated Products (4)Associated Documents - April 5, 2016•Document ID: 10192792Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:CVT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB15011B
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryIF YOU CONFIRM The customer reports a transmission judder (shake, shudder, single or multiple bumps or vibration). NOTE: A new diagnostic logic has been established to enhance the diagnostic process by storing diagnostic trouble codes (DTCs) on Applied Vehicles. The new DTCs are: P17F1 (CVT_JUDDER [C/U INSPECTION]) P17F0 (CVT_JUDDER [T/M INSPECTION]) ACTION 1. Refer to page 4, step 6 in the SERVICE PROCEDURE to confirm this bulletin applies to the vehicle you are working on. NOTE: The current TCM Part Numbers in this bulletin have been updated. The vehicle you are working on may require reprogramming per this bulletin again. 2. If this bulletin applies, reprogram the TCM (Transmission Control Module See this bulletin for further detail.
Associated Products (3)Associated Documents - April 5, 2016•Document ID: 10075621Service Bulletin/Repair InstructionsENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- ITB15-011B
- Date Added:
- July 7, 2016
- Manufacturer:
- INFINITI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (3)Associated Documents - March 31, 2016•Document ID: 10192789Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:CVT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB13055A
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION The Service Procedure (starting on page 2) in this bulletin contains the steps to perform TCM Calibration Data Write Procedures. These procedures are used when a complete CVT is replaced, or a CVT control valve (valve body) is replaced, or a Transmission Control Module (TCM) is replaced. Please see this bulletin for further information.
Associated Products (4)Associated Documents - March 31, 2016•Document ID: 10075618Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB13-055A
- Date Added:
- July 7, 2016
- Manufacturer:
- INFINITI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (4)Associated Documents - March 29, 2016•Document ID: 10192788Service Bulletin/Repair InstructionsEQUIPMENT; FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
- Mfr Comm. #:
- ITB15021A
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION If the clip for the fuel filler cap tether becomes lost or is detached for any reason, it is no longer necessary to replace the fuel filler cap. The clip or "pin" is now available as a separate service part. NOTE - Do not replace the fuel filler cap if only the pin is needed. See this bulletin for further detail.
Associated Products (52)2016 Infiniti Q502016 Infiniti Q702016 Infiniti QX502016 Infiniti QX602016 Infiniti QX702016 Infiniti QX802015 Infiniti Q502015 Infiniti Q602015 Infiniti Q702015 Infiniti QX502015 Infiniti QX602015 Infiniti QX702015 Infiniti QX802014 Infiniti Q502014 Infiniti Q602014 Infiniti Q702014 Infiniti QX502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX80+ 32 moreAssociated Documents - March 1, 2016•Document ID: 10075622Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- AT15-007E
- Date Added:
- July 7, 2016
- Manufacturer:
- INFINITI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (4)Associated Documents - July 29, 2015•Document ID: 10056785Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL; VEHICLE SPEED CONTROL:CRUISE CONTROL
- Mfr Comm. #:
- ITB-14-051
- Date Added:
- February 20, 2015
- Manufacturer:
- INFINITI
SummaryINFINITI: ON SOME VEHICLES, THE FORWARD COLLISION WARNING (FCW) MALFUNCTION HAS BEEN OR IS ON AND FLUID LEVEL FOR BRAKES IS NORMAL AND THE ABS CONTROL UNIT NEEDS PROGRAMMING, PER SERVICE PROCEDURE. MODEL 2013-14 JX35, QX60, 2014-15 Q50. *PE UPDATED 9/10/15. *PE
Associated Products (5)Associated Documents - March 13, 2015•Document ID: 10192541Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- PC358
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryInfiniti is informing affected clients that their vehicles (non-Hybrid models) are eligible for Continually Variable Transmission (CVT) Transmission Control Module (?TCM?) software programming update to improve CVT service diagnostics
Associated Products (2)Associated Documents - August 18, 2014•Document ID: 10192424Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB13035A
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION Applied vehicles equipped with a CVT have a "cap" that appears to be a fluid level gauge. This "cap" will NOT have a gauge or "dipstick". This is normal. Do NOT replace the "cap" because it is thought to have a "dipstick". The fluid level is not checked from this location. The fluid level for applied vehicles is checked from the oil pan (refer to the appropriate section of the Electronic Service Manual (ESM)). Whenever checking, filling, or topping off a CVT's fluid level of an applied vehicle for any reason, use the procedure outlined in the appropriate section of the ESM. See this bulletin for further detail.
Associated Products (3)Associated Documents