Genesis GV70 Service Bulletins (2022)
59 manufacturer communications on file.
- November 15, 2023•Document ID: 10245584Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 23-DS-003G
- Date Added:
- November 30, 2023
- Manufacturer:
- GENESIS
SummaryWhen servicing any of the specified vehicles below with the corresponding DTCs, follow the step-by-step procedures in this bulletin. ⢠Electronic-Limited Slip Differential (E-LSD) actuator DTC codes P188213, P188900, or P189600
Associated Products (7)Associated Documents - November 15, 2023•Document ID: 10245583Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 23-DS-002G
- Date Added:
- November 30, 2023
- Manufacturer:
- GENESIS
SummaryWhen servicing any of the specified vehicles below with the corresponding DTCs, follow the step-by-step procedures in this bulletin. ⢠Transfer case actuator DTC codes P196000, P195800, or P195513
Associated Products (4)Associated Documents - October 9, 2023•Document ID: 10244957Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 23-DS-004G-1
- Date Added:
- November 6, 2023
- Manufacturer:
- GENESIS
SummaryCertain GV70 (JK1 and JK1A), GV80 (JX1) and G80 (RG3) vehicles may have a noise condition from the rear differential at certain speeds while accelerating or decelerating. This bulletin describes the procedure to inspect the vehicle for noise and if necessary to tighten the lock nut or if necessary replace the differential.
Associated Products (11)Associated Documents - October 9, 2023•Document ID: 10244956Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 23-FL-006G
- Date Added:
- November 6, 2023
- Manufacturer:
- GENESIS
SummaryNeutral Coasting Mode may not activate under certain conditions when the battery State of Charge (SOC) is less than 75%. This update revises the software logic to be activated regardless of battery SOC.
Associated Products (7)Associated Documents - September 12, 2023•Document ID: 10243320Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 23-ST-004G-1
- Date Added:
- October 2, 2023
- Manufacturer:
- GENESIS
SummaryThis bulletin describes the procedure to inspect the steering universal joint dust cover for noise, and if necessary, apply grease on certain Genesis vehicles.
Associated Products (13)Associated Documents - August 30, 2023•Document ID: 10241898Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 23-DS-004G
- Date Added:
- September 6, 2023
- Manufacturer:
- GENESIS
SummaryCertain GV70 (JK1 and JK1A), GV80 (JX1) and G80 (RG3) vehicles may have a noise condition from the rear differential at certain speeds while accelerating or decelerating. This bulletin describes the procedure to inspect the vehicle for noise and if necessary to tighten the lock nut or if necessary replace the differential.
Associated Products (8)Associated Documents - June 20, 2023•Document ID: 10238384Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 23-AT-007G
- Date Added:
- July 1, 2023
- Manufacturer:
- GENESIS
SummaryWhen servicing an 8-speed automatic transmission vehicle with a âCheck Engine lightâ and any of the DTCs listed below, follow the Service Procedure and, if necessary, replace the E-module.
Associated Products (13)Associated Documents - April 24, 2023•Document ID: 10235565Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 23-ST-004G
- Date Added:
- May 4, 2023
- Manufacturer:
- GENESIS
SummaryThis bulletin describes the procedure to inspect the steering universal joint dust cover for noise, and if necessary, apply grease on certain Genesis vehicles.
Associated Products (9)Associated Documents - April 24, 2023•Document ID: 10235566Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 23-BD-007H
- Date Added:
- May 4, 2023
- Manufacturer:
- GENESIS
SummaryHyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
Associated Products (52)2026 Hyundai Venue2023 Genesis G702023 Genesis G802023 Genesis G902023 Genesis GV602023 Genesis GV702023 Genesis GV802023 Hyundai Elantra2023 Hyundai Elantra N2023 Hyundai Ioniq 52023 Hyundai Kona2023 Hyundai Nexo2023 Hyundai Palisade2023 Hyundai Santa Cruz2023 Hyundai Santa Fe2023 Hyundai Sonata2023 Hyundai Tucson2023 Hyundai Venue2022 Genesis G702022 Genesis G80+ 32 moreAssociated Documents - April 20, 2023•Document ID: 10235562Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 23-DS-001G-1
- Date Added:
- May 4, 2023
- Manufacturer:
- GENESIS
SummaryWhen servicing any of the specified vehicles below with the corresponding DTCs, follow the step-by-step procedures in this bulletin. ⢠Electronic-Limited Slip Differential (E-LSD) actuator on certain 2022 to 2023MY GV70 (JK1) and 2021 to 2023MY GV80 (JX1) for DTC codes P188213, P188900, or P189600. ⢠Transfer case actuator on certain 2022 to 2023MY GV70 (JK1) for DTC codes P196000, P195800, or P195513.
Associated Products (5)Associated Documents - April 10, 2023•Document ID: 10235347Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 23-DS-001G
- Date Added:
- May 2, 2023
- Manufacturer:
- GENESIS
SummaryWhen servicing any of the specified vehicles below with the corresponding DTCs, follow the step-by-step procedures in this bulletin. ⢠Electronic-Limited Slip Differential (E-LSD) actuator on certain 2022 to 2023MY GV70 (JK1) and 2021 to 2023MY GV80 (JX1) for DTC codes P1882, P1889, or P1896. ⢠Transfer case actuator on certain 2022 to 2023MY GV70 (JK1) for DTC codes P1960, P1958, or P1955.
Associated Products (5)Associated Documents - March 20, 2023•Document ID: 10233543Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 23-AT-001G
- Date Added:
- April 4, 2023
- Manufacturer:
- GENESIS
SummaryWhen servicing a vehicle with a âCheck Engine lightâ and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.
Associated Products (14)Associated Documents - January 30, 2023•Document ID: 10230903Service Bulletin/Repair InstructionsVISIBILITY
- Mfr Comm. #:
- 23-BD-002G
- Date Added:
- February 2, 2023
- Manufacturer:
- GENESIS
SummaryThis bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly.
Associated Products (15)Associated Documents - January 5, 2023•Document ID: 10230914Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 23-01-001G
- Date Added:
- February 2, 2023
- Manufacturer:
- GENESIS
SummaryCertain 2022MY GV70 (JK1) vehicles may exhibit cracks on the side sill body panels. This bulletin outlines the procedures to inspect the side sill body panels and, if necessary, repair the cracks.
Associated Products (1)Associated Documents - June 8, 2022•Document ID: 10253041Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 22-01-053G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryCertain 2022 GV70 (JK1) vehicles may have the driver-side rear suspension coil out of position. This condition could lead to a squeak noise during suspension movement. This bulletin outlines the procedures to inspect the driver-side rear suspension coil position setting and, if necessary, adjust the coil to its correct position.
Associated Products (1)Associated Documents - February 16, 2022•Document ID: 10253054Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 22-FL-001G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides information related to the ECM(Engine Control Module) software update for 3.5L GDI engine equipped vehicles that experience check engine light, no drivability issue, and with either of the following DTC found stored in the ECM: ⢠P2096 - Post Catalyst Fuel Trim - System Too Lean (Bank 1). ⢠P2098 - Post Catalyst Fuel Trim - System Too Lean (Bank 2).
Associated Products (5)Associated Documents - August 17, 2021•Document ID: 10253048Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 21-AT-015G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis TSB provides a procedure to diagnose and repair a transmission for the following Incorrect Ratio DTC (transmission clutch slipping more than 200 rpm in gear).
Associated Products (20)2025 Genesis GV702024 Genesis G702024 Genesis G802024 Genesis G902024 Genesis GV702024 Genesis GV802023 Genesis G702023 Genesis G802023 Genesis G902023 Genesis GV702023 Genesis GV802022 Genesis G702022 Genesis G802022 Genesis G902022 Genesis GV702022 Genesis GV802021 Genesis G702021 Genesis G802021 Genesis G902021 Genesis GV80Associated Documents - February 3, 2021•Document ID: 10253049Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 21-BD-001G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryGenesis applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
Associated Products (22)2025 Genesis GV702024 Genesis G702024 Genesis G802024 Genesis G902024 Genesis GV602024 Genesis GV702024 Genesis GV802023 Genesis G702023 Genesis G802023 Genesis G902023 Genesis GV602023 Genesis GV702023 Genesis GV802022 Genesis G702022 Genesis G802022 Genesis G902022 Genesis GV702022 Genesis GV802021 Genesis G702021 Genesis G80+ 2 moreAssociated Documents - July 27, 2020•Document ID: 10253038Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN
- Mfr Comm. #:
- 21-AT-012G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. ï· Before replacing an automatic transmission (Pages 2~3): Input the data from the new transmission into the TCU using the GDS. ï· Before replacing a TCU (Pages 4~6): Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.
Associated Products (16)Associated Documents