Ford Bronco Service Bulletins (2022)
274 manufacturer communications on file.
- October 24, 2022•Document ID: 10225509Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- TSB 22-2403
- Date Added:
- November 1, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles may exhibit water leaks located at the A-pillars, overhead console/upfitter switches and/or sun visors. To correct the condition, follow the Service Procedure to diagnose and repair the water leak.
Associated Products (2)Associated Documents - October 18, 2022•Document ID: 10224796Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- TSB 22-2274
- Date Added:
- October 25, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a soft top may exhibit exterior wear on the sides of the top above the B-pillar. This may be due to contact and rubbing between the soft top frame and fabric. To correct the condition, follow the Service Procedure to replace both right and left deflectors attached to the soft top frame and soft top cover.
Associated Products (2)Associated Documents - October 6, 2022•Document ID: 10222788Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- SSM 51120
- Date Added:
- October 11, 2022
- Manufacturer:
- FORD
SummarySome Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
Associated Products (31)2022 Ford Bronco2022 Ford Bronco Sport2022 Ford E-3502022 Ford E-4502022 Ford Edge2022 Ford Escape2022 Ford Expedition2022 Ford Explorer2022 Ford F-1502022 Ford GT2022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Ford Transit2022 Ford Transit Connect2022 Lincoln Aviator2022 Lincoln Corsair2022 Lincoln Nautilus2022 Lincoln Navigator2021 Ford Bronco+ 11 moreAssociated Documents - October 4, 2022•Document ID: 10222787Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- SSM 51118
- Date Added:
- October 11, 2022
- Manufacturer:
- FORD
SummarySome 2022 Bronco vehicles built on 01-Feb-2022 and through 10-Mar-2022 may exhibit rusted fasteners on the front fender trail sights (base part number 9920038). This may be due to a lack of protective e-coating applied to the bolts during the manufacturing process. Replacement of the exterior bodyside grab handle assembly will no longer be required. Trail sight fasteners are now available on their own as SPN: M2DZ-18D654-A. This kit comes with two bolts and two nuts, enough to replace all fasteners on one trail sight assembly. These fasteners work on both the left and right trail sights.
Associated Products (2)Associated Documents - September 29, 2022•Document ID: 10222313Service Bulletin/Repair InstructionsBACK OVER PREVENTION; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
- Mfr Comm. #:
- OTASU3 P2 Bronco
- Date Added:
- October 4, 2022
- Manufacturer:
- FORD
SummarySoftware Update 3 Part 2 for 2021-2022 Model Year Bronco vehicles is now available. Quality Improvements Include: Functionality of rear view camera is improved.
Associated Products (2)Associated Documents - September 20, 2022•Document ID: 10222195Service Bulletin/Repair InstructionsSERVICE BRAKES, AIR:ANTILOCK
- Mfr Comm. #:
- TSB 22-2360
- Date Added:
- September 30, 2022
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 22-2210 to update the expected release date of the revised ABS module software. Customers who neutral (4-wheel flat) tow 2021-2022 Broncos equipped with an electronic brake booster (EBB) may report an inconsistent brake assist when a supplemental braking system has been installed. This may result from supplemental brake system set-up that does not account for the Broncos EBB system entering sleep mode (via the ABS module) after a pre-determined period of time following vehicle shut-down. This functionality is necessary to prevent battery drain. Enhanced software is under development to address this condition when the vehicle enters Neutral Tow mode. The new software is expected to be available in December 2022. Monitor OASIS for updates. Until the software becomes available, customers who meet this criteria may perform the procedures below to address this condition when neutral (4-wheel flat) towing their vehicle.
Associated Products (2)Associated Documents - September 15, 2022•Document ID: 10220384Service Bulletin/Repair InstructionsELECTRONIC STABILITY CONTROL (ESC); SERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- TSB 22-2354
- Date Added:
- September 23, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit an illuminated anti-lock brake system (ABS) indicator and stability-traction control indicator, and diagnostic trouble code (DTC) C1013:09 stored in the ABS module. This may be due to ABS module software. To correct the condition, follow the Service Procedure to update the ABS module software.
Associated Products (2)Associated Documents - September 15, 2022•Document ID: 10220383Service Bulletin/Repair InstructionsPARKING BRAKE
- Mfr Comm. #:
- TSB 22-2353
- Date Added:
- September 23, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit multiple error messages displayed in the IPC followed by automatic engagement of the parking brake immediately after starting the vehicle with the doors removed or after sitting in the vehicle for an extended period of time with the vehicle off. This may be due to the software within the anti-lock brake (ABS) module. To correct the condition, follow the Service Procedure to reprogram the ABS module.
Associated Products (2)Associated Documents - August 31, 2022•Document ID: 10218910Service Bulletin/Repair InstructionsBACK OVER PREVENTION:SOFTWARE
- Mfr Comm. #:
- OTASU3 P1 Bronco
- Date Added:
- September 1, 2022
- Manufacturer:
- FORD
SummarySoftware Update 3 Part 1 for 2021-2022 Model Year Bronco vehicles is now available. Quality Improvements Include: Fix for low power mode rearview camera distortion when the vehicle is shut off and restarted quickly.
Associated Products (2)Associated Documents - August 15, 2022•Document ID: 10218629Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 22-2325
- Date Added:
- August 23, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a stabilizer bar disconnect system may exhibit an illuminated red and/or amber stabilizer bar disconnect indicator and diagnostic trouble code (DTC) C103A:74 stored in the chassis control module (CHCM). This may be due to the software in the CHCM. To correct the condition, follow the Service Procedure to reprogram the CHCM.
Associated Products (2)Associated Documents - August 11, 2022•Document ID: 10217841Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 51014
- Date Added:
- August 15, 2022
- Manufacturer:
- FORD
SummaryThe electronic parts catalog for the 2021-2022 Bronco equipped with a 2.7L GTDI engine had the incorrect engine oil dipstick assigned. This problem only existed for a few months and has since been corrected. The incorrect dipstick that showed in the catalog was SPN: MB3Z-6750-B/F (EPN: MB3E-6750-BB/BC). The 'MB3Z' dipstick (EPN: 'MB3E') is ONLY designed for use on the 2022 Bronco Raptor which is equipped with a 3.0L GTDI engine. The correct engine oil dipstick for the 2021-2022 Bronco 2.7L GTDI engine is SPN: FT4Z-6750-B/C (EPN: FT4E-6750-BF/BG).
Associated Products (2)Associated Documents - August 2, 2022•Document ID: 10218615Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- TSB 22-2306
- Date Added:
- August 23, 2022
- Manufacturer:
- FORD
SummarySome 2022 Bronco vehicles may exhibit a whistle noise below the lower left windshield area at the bottom of the A-pillar. This may be due to a missed body sealer application at the factory. To correct this condition, follow the Service Procedure to reseal the affected body seam.
Associated Products (1)Associated Documents - July 29, 2022•Document ID: 10217028Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 50975
- Date Added:
- August 2, 2022
- Manufacturer:
- FORD
SummarySome 2017-2022 Ford/Lincoln customers may experience a notification in the FordPassÃÂÃÂÃÂî/LincolnWayÃÂÃÂÃÂî app indicating Vehicle Has Entered Deep Sleep Mode. This occurs when the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SOC) drops below 50%. A warning may also set if the telematic control unit (TCU) has received an over the air update. The TCU powers down all communication when in this mode and app features are disabled. Manually start the vehicle to wake if from mode. More information is located in the app under: Account > Help > search 'Deep Sleep' in the entry box. If the condition remains, check the BCM 12v SOC. If the SOC does not change after charging the battery or after BMS reset is performed, continue with normal battery and/or BMS sensor diagnostics.
Associated Products (27)2022 Ford Bronco2022 Ford Bronco Sport2022 Ford Edge2022 Ford Expedition2022 Ford Explorer2022 Ford F-1502022 Ford GT2022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Lincoln Aviator2022 Lincoln Corsair2022 Lincoln Nautilus2022 Lincoln Navigator2021 Ford Bronco2021 Ford Bronco Sport2021 Ford Edge2021 Ford Expedition2021 Ford Explorer2021 Ford F-150+ 7 moreAssociated Documents - July 27, 2022•Document ID: 10216954Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- SSM 50965
- Date Added:
- August 2, 2022
- Manufacturer:
- FORD
SummarySome 2022 Bronco vehicles built on 13-Apr-2022 and through 20-Apr-2022 may exhibit an intermittent turn signal that blinks fast and diagnostics trouble codes (DTCs) B1497 and/or B1498 set within the body control module (BCM). To correct this condition, replace the appropriate left and/or right LED control module that corresponds with the DTCs set in the BCM. Refer to Workshop Manual, Section 417-01.
Associated Products (1)Associated Documents - July 22, 2022•Document ID: 10216465Service Bulletin/Repair InstructionsVISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR
- Mfr Comm. #:
- TSB 22-2297
- Date Added:
- July 28, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with base exterior mirrors (does not have integrated puddle lamps and/or turn signal lamps) may have a whistle noise that originates from the left exterior mirror. This may be due to the design of the exterior mirror cover. To correct this condition, follow the Service Procedure to replace both the left and right exterior mirror covers.
Associated Products (2)Associated Documents - July 22, 2022•Document ID: 10216464Service Bulletin/Repair InstructionsSTRUCTURE:BODY:ROOF AND PILLARS
- Mfr Comm. #:
- TSB 22-2296
- Date Added:
- July 28, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a factory soft top roof may experience excessive wind noise while driving, loose soft top cover, and/or difficulty latching. This may be due incorrect soft top assembly installation, latch striker positioning and/or a failed soft top component. To correct the conditions, follow the Service Procedure to inspect the vehicle and adjust the soft top components as necessary.
Associated Products (2)Associated Documents - July 21, 2022•Document ID: 10216460Service Bulletin/Repair InstructionsSTRUCTURE:BODY:ROOF AND PILLARS
- Mfr Comm. #:
- TSB 22-2288
- Date Added:
- July 28, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a hard top roof may exhibit symptoms from the front roof panels that sit at an uneven height which may result in a poor appearance, excessive wind noise, water leaks and/or difficulty latching. This may be due to incorrect vertical adjustment of the front roof panel latch strikers. To correct this condition, follow the Service Procedure to adjust the front panel latch strikers.
Associated Products (2)Associated Documents - July 20, 2022•Document ID: 10216539Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SSM 50951
- Date Added:
- July 29, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with an EBB may exhibit multiple error messages displayed in the IPC followed by automatic engagement of the parking brake immediately after starting the vehicle with the doors removed or after sitting in the vehicle for an extended period of time with the vehicle off. The issue will resolve itself once the brake pedal is no longer depressed or the parking brake is manually disengaged. This may be due to the software within the anti-lock brake (ABS) module. This issue can be avoided by placing the vehicle in accessory mode for a few seconds before starting the engine. Engineering is working on improved software to correct this condition that will be available in November 2022. No repairs should be made in attempt to correct this condition. Monitor OASIS for updates.
Associated Products (2)Associated Documents - June 29, 2022•Document ID: 10214880Service Bulletin/Repair InstructionsSERVICE BRAKES; BACK OVER PREVENTION:SOFTWARE
- Mfr Comm. #:
- TSB 22-2255
- Date Added:
- July 1, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles built on or before 14-Mar-2022 and equipped with a 2.7L engine may exhibit the inability to disable the traction control system using the traction control on/off switch located on the instrument panel. This may be due to the software within the anti-lock brake system (ABS) module. To correct the condition, follow the Service Procedure and update the ABS software.
Associated Products (2)Associated Documents - June 21, 2022•Document ID: 10214828Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 50871
- Date Added:
- June 30, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles may exhibit a Cross Traffic System/Blind Spot System Fault in instrument panel cluster (IPC). If these symptoms are encountered, inspect the wiring under the rear bumper for chaffing of the 13A409 harness close to connector C4369. If this is determined to be the cause of the issue, refer to Wiring Diagram Cell 005 for wiring repair. If no wiring issues are found, continue with normal diagnostics in Workshop Manual (WSM), Section 419-04.
Associated Products (2)Associated Documents