CAN-AM Spyder Service Bulletins
234 manufacturer communications on file.
- October 7, 2014•Document ID: 10118138Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- Article 77579
- Date Added:
- September 27, 2017
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST) discussing about BRP having received reports of SE6 1330 engines stalling when shifting from neutral after being restarted. This situation is caused by a software issue. In the event of a client complaining about this situation, a correction procedure is provided.
Associated Products (1)Associated Documents - October 3, 2014•Document ID: 10088501Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
- Mfr Comm. #:
- 2014-7
- Date Added:
- January 12, 2017
- Manufacturer:
- CAN-AM
SummaryARTICLE DISCUSSING WARRANTY BULLETIN 2014-7 FOR UNREGISTERED VEHICLE ONLY ADDRESSING THE PROBLEM OF THE GAS CAP THAT MAY BE IMPOSSIBLE TO REMOVE. THE RATCHING MECHANICAL INSIDE DE GAS CAP CAN FAIL. THE SOLUTION IS TO REPLACE THE GAS CAP DURING PREDELIVERY INSPECTION.
Associated Products (1)Associated Documents - October 3, 2014•Document ID: 10088486Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
- Mfr Comm. #:
- 2014-7
- Date Added:
- January 12, 2017
- Manufacturer:
- CAN-AM
SummaryARTICLE DISCUSSING WARRANTY BULLETIN 2014-7 FOR UNREGISTERED VEHICLE ONLY ADDRESSING THE PROBLEM OF THE GAS CAP THAT MAY BE IMPOSSIBLE TO REMOVE. THE RATCHING MECHANICAL INSIDE DE GAS CAP CAN FAIL. THE SOLUTION IS TO REPLACE THE GAS CAP DURING PREDELIVERY INSPECTION.
Associated Products (1)Associated Documents - September 13, 2014•Document ID: 10118140Service Bulletin/Repair InstructionsPOWER TRAIN:CLUTCH ASSEMBLY
- Mfr Comm. #:
- Posting SE5 Clut
- Date Added:
- September 27, 2017
- Manufacturer:
- CAN-AM
SummaryThis older dealer posting regarding SE5 clutch chatter at take off will now have a reference to the revised version of Article 68498.
Associated Products (1)Associated Documents - September 12, 2014•Document ID: 10088485Service Bulletin/Repair InstructionsENGINE; EQUIPMENT
- Mfr Comm. #:
- ARTICLE 87480
- Date Added:
- January 12, 2017
- Manufacturer:
- CAN-AM
SummaryTECHNICAL SERVICE TIP (TST):INSTRUCTION TO BE FOLLOWED IF A CUSTOMER COMPLAINS OF EXCESSIVE HEAT FELT ON THE LATERAL PANELS IN CERTAIN RIDING CONDITIONS. THE SOLUTION IS TO MAKE SURE THE UNIT HAS THE 2013-9 WARRANTY CAMPAIGN ECM UPDATE PERFORM PRIOR TO THE INSTALLATION OF THESE PANEL AND THE INSTALLATION THE AIR SCOOP PANEL KIT.
Associated Products (1)Associated Documents - September 12, 2014•Document ID: 10056676Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- TST-000087
- Date Added:
- January 31, 2015
- Manufacturer:
- CAN-AM
SummaryBRP MC: IN CERTAIN RIDING CONDITION, EXCESSIVE HEAT IS FELT ON LATERAL PANELS. MODEL 2013 RS/ST. *PE
Associated Products (1)Associated Documents - September 5, 2014•Document ID: 10088484Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD
- Mfr Comm. #:
- ARTICLE 64634
- Date Added:
- January 12, 2017
- Manufacturer:
- CAN-AM
SummaryTECHNICAL SERVICE TIP (TST) THAT ADDRESSES THE ISSUE THAT SOME CUSTOMERS HAVE REPORTED THAT WITH THE INSTALLATION OF THE HIGH WINDSHIELD FOR PAC THAT IN SOME CERTAIN DRIVING CONDITIONS THE WINDSHIELD DROPS. THE SOLUTION IS THE INSTALLATION OF THE HIGH WINDSHIELD REFURBISH KIT.
Associated Products (1)Associated Documents - September 5, 2014•Document ID: 10056672Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD
- Mfr Comm. #:
- TST-219-800
- Date Added:
- January 30, 2015
- Manufacturer:
- CAN-AM
SummaryBRP MC: ON CERTAIN MOTORCYCLES, WHEN RIDING. THE WINDSHIELD WILL DROP AND A HIGH WINDSHIELD REFURBISH KIT IS NOW AVAILABLE TO ADDRESS THIS ISSUE. *PE
Associated Products (1)Associated Documents - August 26, 2014•Document ID: 10057375Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 000034361
- Date Added:
- May 22, 2015
- Manufacturer:
- CAN-AM
SummaryBRP ROADSTER : COMPLAINTS REGARDING INTERMITTENT DPS ASSISTANCE OR NO ASSISTANCE AT ALL. *LJ
Associated Products (1)Associated Documents - August 18, 2014•Document ID: 10056027Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- BRP-51492
- Date Added:
- August 18, 2014
- Manufacturer:
- CAN-AM
SummaryBRP MC: WHEN BRAKE PEDAL IS RESTING ON HUMP STOP, THE BRAKE LIGHT REMAINS ON, CAUSING DRAINAGE TO THE BATTERY. MODEL 2013 ROADSTER. *PE
Associated Products (1)Associated Documents - July 18, 2014•Document ID: 10088483Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD
- Mfr Comm. #:
- 2014-6
- Date Added:
- January 12, 2017
- Manufacturer:
- CAN-AM
SummaryWARRANTY BULLETIN 2014-6 CONCERNING THE PROBLEM OF ONE OR MORE OF THE SCREWS HOLDING THE WINDSHIELD ASSEMBLY MAY BRAKE. THE SOLUTION IS TO REPLACE THE WINDSHIELD ASSEMBLY SLEEVES AND SCREWS AS DESCRIBED IN THE PROCEDURE.
Associated Products (1)Associated Documents - July 18, 2014•Document ID: 10088482Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP; VISIBILITY:WINDSHIELD
- Mfr Comm. #:
- BULLETIN 2014-5
- Date Added:
- January 12, 2017
- Manufacturer:
- CAN-AM
SummaryWARRANTY BULLETIN 2014-5 THAT ADDRESSED THE FOLLOWING PROBLEMS: A) ONE OR MORE OF THE SCREWS HOLDING THE WINDSHIELD ASSEMBLY MAY BRAKE. THE SOLUTION IS TO REPLACE THE WINDSHIELD ASSEMBLY SLEEVES AND SCREWS AS DESCRIBED IN THE PROCEDURE; B) THE RATCHETING MECHANISM INSIDE THE GAS CAP CAN FAIL. THE SOLUTION IS TO REPLACE THE GAS CAP.
Associated Products (1)Associated Documents - June 4, 2014•Document ID: 10084725Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- BULLETIN 2014-3
- Date Added:
- November 23, 2016
- Manufacturer:
- CAN-AM
SummaryWARRANTY PAC BULLETIN 2014-3 ADDRESSING A POSSIBLE LIMP HOME MODE TRIGGERED BY CB WHILE TRANSMITTING DUE TO INCORRECTLY SHIELDED CAN WIRES IN ENTERTAINMENT AND CB HARNESS. BRP SUGGEST TO RETURN ALL AFFECTED KITS IF IN DEALER'S INVENTORY OR REPLACE ENTERTAINMENT HARNESS AND CB COMMUNICATION KIT IF IT IS INSTALLED ON VEHICLES AND ONLY ON VEHICLES THAT EXPERIENCE THE PROBLEM.
Associated Products (2)Associated Documents - May 29, 2014•Document ID: 10084724Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:IGNITION:SWITCH; EXTERIOR LIGHTING:TURN SIGNAL
- Mfr Comm. #:
- 2014-2 -RV2
- Date Added:
- November 23, 2016
- Manufacturer:
- CAN-AM
SummaryREVISION 2 OF WARRANTY BULLETIN 2014-2 ADRESSING TWO PROBLEMS: A) POSSIBLE DEFFECTIVE IGNITION SWITCH. THE FAILURE MAY INCLUDE UNABLE TO TURN KEY IN IGNITION SWITCH OR UNABLE TO REMOVE KEY FROM IGNITION SWITCH. NEW PROCEDURE FO THE REPLACEMENT OF THE IGNITION SWITCH IS DESCRIBED; B) FAST FLASHER BLINK RATE. THE MULTIFUNCTION GAUGE CLUSTER REQUIRES RE-CALIBRATION.
Associated Products (1)Associated Documents - May 29, 2014•Document ID: 10055933Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:TURN SIGNAL:FLASHER UNIT; ELECTRICAL SYSTEM:IGNITION:SWITCH
- Mfr Comm. #:
- WB-2014-2
- Date Added:
- August 6, 2014
- Manufacturer:
- CAN-AM
SummaryBRP MC: MOTORCYCLE EXPERIENCING A DEFECTIVE IGNITION KEY, RATE OF FAST FLASHER BLINK, THE COVER OF SEAT AND/OR FRONT STORAGE FAILS TO OPEN. *PE
Associated Products (1)Associated Documents - April 12, 2014•Document ID: 10186274Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- D109338
- Date Added:
- February 1, 2021
- Manufacturer:
- CAN-AM
SummaryTrailer module may fail.
Associated Products (13)Associated Documents - April 9, 2014•Document ID: 10084702Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:BRAKE LIGHTS
- Mfr Comm. #:
- ARTICLE 51492
- Date Added:
- November 23, 2016
- Manufacturer:
- CAN-AM
SummaryTECHNICAL SERVICE TIP (TST): BRP HAS RECEIVED REPORTS CONCERNING THE BRAKE LIGHT STAYING LIT WHEN THE BRAKE PEDAL IS RESTING ON THE BUMP STOP. THIS WILL CAUSE BATTERY DRAINAGE. THERE ARE 2 REASONS THE BRAKE LIGHT SWITCH MAY NOT OPERATE CORRECTLY.THE BRAKE LIGHT SWITCH SUPPORT PLATE IS WARPED OR THE BRAKE LIGHT SWITCH PLUNGER IS DIRTY AND STICKING. THIS REQUIRES THE REPLACEMENT OF THE BRAKE LIGHT SWITCH AND POSSIBLY THE SUPPORT PLATE DEPENDING ON THE PRODUCTION DATE OF THE UNIT.
Associated Products (1)Associated Documents - April 9, 2014•Document ID: 10055108Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT ADAPTIVE/MOBILITY; ENGINE
- Mfr Comm. #:
- SB-2013-0015
- Date Added:
- April 10, 2014
- Manufacturer:
- CAN-AM
SummaryBRP: FRONT FUSE BOXES SEAL ALLOWS WATER TO INFILTRATE; WHEN ENGINE HAS STARTED CAN CAUSE CODE P1614 TO BE TRIGGERED AND HOME LIMP MODE; THE BELT GUARD RETAINING SCREWS ARE NOT SECURED PROPERLY. *PE
Associated Products (2)Associated Documents - April 1, 2014•Document ID: 10084722Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS; ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS
- Mfr Comm. #:
- BULLETIN 2013-9
- Date Added:
- November 23, 2016
- Manufacturer:
- CAN-AM
SummaryREVISON 1 OF WARRANTY BULLETIN 2013-9 ADRESSING 3 PROBLEMS: A) SEAL THE FRONT FUSE BOXES BECAUSE WATER MAY INFILTRATE EITHER OF THE FRONT FUSE BOXES; B) UPDATE ECM SOFTWARE BECAUSE CODE P1614 MAY BE TRIGGERED AND CAUSE A LIMP HOME MODE WHEN STARTING THE ENGINE; C) REPLACE UPPER BELT GUARD RETAINING SCREWS THAT MAY NOT SECURE THE BELT GUARD PROPERLY.
Associated Products (1)Associated Documents - April 1, 2014•Document ID: 10055104Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SB-2013-9
- Date Added:
- April 10, 2014
- Manufacturer:
- CAN-AM
SummaryBRP: ON SOME MOTORCYCLES, THE UPPER BELT GUARDS ARE FALLING OFF DUE TO THE TORX SCREWS BEING SHORT AND NOT ABLE TO REACH NYLON OF NUT. *PE UPDATE SEAL FRONT FUSE BOX & ECM SOFTWARE. 8/18/14. *PE
Associated Products (1)Associated Documents