BMW R nineT Service Bulletins (2017)
85 manufacturer communications on file.
- March 18, 2024•Document ID: 10252047Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- MC330224
- Date Added:
- April 1, 2024
- Manufacturer:
- BMW
SummaryAfter close inspection of the manufacturing process, there is a weld seam at the hollow shaft and crown wheel connection in the rear drive that is not to specification in a few rear drives. Depending on riding habit, this can lead to slipping and loss of propulsion over time.
Associated Products (8)Associated Documents - January 11, 2024•Document ID: 10249027Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B611305
- Date Added:
- February 1, 2024
- Manufacturer:
- BMW
SummaryThe electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle âÂÂdischarged batteryâ complaints.
Associated Products (1018)Associated Documents - November 8, 2022•Document ID: 10228448Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- MC000222
- Date Added:
- January 3, 2023
- Manufacturer:
- BMW
SummaryBMW Motorrad is aware of a number of cases in which the screw connections of the Paralever link and/or the rear brake caliper have loosened in customer vehicles while driving.
Associated Products (82)2023 BMW R 1250 GS2023 BMW R 1250 GS Adventure2023 BMW R 1250 R2023 BMW R 1250 RS2023 BMW R 1250 RT2023 BMW R nineT2022 BMW R 1250 GS2022 BMW R 1250 GS Adventure2022 BMW R 1250 RT2021 BMW R 1250 GS2021 BMW R 1250 GS Adventure2021 BMW R 1250 R2021 BMW R 1250 RS2021 BMW R 1250 RT2021 BMW R nineT2020 BMW R 1250 GS2020 BMW R 1250 GS Adventure2020 BMW R 1250 R2020 BMW R 1250 RS2020 BMW R 1250 RT+ 62 moreAssociated Documents - September 20, 2021•Document ID: 10204667Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- MC000521
- Date Added:
- December 13, 2021
- Manufacturer:
- BMW
SummaryOne of the following situations can occur when connecting to BN2000 motorcycles: 1. The installed control units cannot be found when reading out with ISTA. 2. Control units initially communicate after connecting to the vehicle, but communication later stops.
Associated Products (74)2021 BMW R nineT2021 BMW S 1000 RR2020 BMW R nineT2020 BMW S 1000 RR2019 BMW F 800 GS2019 BMW R nineT2018 BMW C 6502018 BMW F 800 GS2018 BMW R nineT2017 BMW C 6502017 BMW F 800 GS2017 BMW F 800 GT2017 BMW F 800 R2017 BMW R 1200 GS2017 BMW R nineT2017 BMW S 1000 RR2016 BMW C 6502016 BMW F 800 GS2016 BMW F 800 GT2016 BMW F 800 R+ 54 moreAssociated Documents - July 13, 2021•Document ID: 10201170Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- MC610821
- Date Added:
- September 7, 2021
- Manufacturer:
- BMW
SummaryWhen diagnosing fault codes (0x3A13D7, 0x3A13D9), technicians erroneously condemn the electronic throttle grip, which analyses show is rarely the culprit.
Associated Products (138)2021 BMW F 750 GS2021 BMW F 850 GS2021 BMW F 900 R2021 BMW F 900 XR2021 BMW K 1600 B2021 BMW K 1600 GT2021 BMW K 1600 GTL2021 BMW M 1000 RR2021 BMW R 1250 GS2021 BMW R 1250 GS Adventure2021 BMW R 1250 R2021 BMW R 1250 RS2021 BMW R 1250 RT2021 BMW R 182021 BMW R 18 Classic2021 BMW R nineT2021 BMW S 1000 R2021 BMW S 1000 RR2021 BMW S 1000 XR2020 BMW F 750 GS+ 118 moreAssociated Documents - May 5, 2021•Document ID: 10200494Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- MC110521
- Date Added:
- August 23, 2021
- Manufacturer:
- BMW
SummaryDuring quality analysis, an issue was identified with a small group of sixteen (16) motorcycles that mayaffect crankshaft bearing wear.
Associated Products (8)Associated Documents - April 1, 2019•Document ID: 10160232Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- MC3600118
- Date Added:
- May 20, 2019
- Manufacturer:
- BMW
SummaryDuring the course of quality analysis, it was determined by BMW Motorrad that in the production period from February 2018 to end of June 2018, cross-spoked wheels with reduced spoke tension have been produced.
Associated Products (22)2019 BMW R 1200 GS2019 BMW R nineT2018 BMW R 1200 GS2018 BMW R nineT2017 BMW R 1200 GS2017 BMW R nineT2016 BMW R 1200 GS2016 BMW R nineT2015 BMW R 1200 GS2015 BMW R nineT2014 BMW R 1200 GS2014 BMW R nineT2013 BMW R 1200 GS2012 BMW R 1200 GS2011 BMW R 1200 GS2010 BMW R 1200 GS2009 BMW R 1200 GS2008 BMW R 1200 GS2007 BMW R 1200 GS2006 BMW R 1200 GS+ 2 moreAssociated Documents - October 1, 2018•Document ID: 10149548Service Bulletin/Repair InstructionsAIR BAGS; ELECTRICAL SYSTEM; SEAT BELTS
- Mfr Comm. #:
- B720417
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryFALSE WARNINGS THAT THE FRONT PASSENGER SEAT IS OCCUPIED WITHOUT THE SEAT BELT BUCKLED. Acoustic and visual warnings indicate that the front passenger seat is occupied and the seat belt is not fastened, when the seat is actually unoccupied. If the situation is currently present, sit in the seat and move the seat to a different position then the POL (Passenger Occupancy Light) light will function correctly. In some cases the Air bag Warning Light was illuminated. Advanced Crash Safety Module (ACSM) fault "930A1C - Front passenger seat occupancy detection transmitting fault (moisture)" is stored. 1. Electronics (for example smart phones or laptops) are connected to the USB charging port or cigarette lighter and placed on the seat. 2. The seat was wet (e.g. very high humidity, spilled liquids or rain). 3. Faulty plug connection to Evaluation Electronics CIS (Capacitive Interior Sensing). 4. Excessive spacing between seat mat sensor signal wires and their grounding shield sleeve. * Drying the seat mat due to moisture. * If there is no moisture, secure loose cables and install 2 cable ties * If the 2 cables ties are already installed properly, replace the seat mat * Statement added to SI - do not replace the CIS electronics or the ACSM module for this siutation.
Associated Products (17)Associated Documents - October 1, 2018•Document ID: 10149487Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B170418
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryDELIVERY STOP. LOW TEMPERATURE COOLANT SYSTEM.A Delivery Stop has been issued (effective October 16, 2018) on Model Year 2019 BMW 5 and 7 Series vehicles that have been produced from September 13-14, 2018. There is a possibility that the affected vehicles do not have the correct amount of coolant in the low-temperature coolant system. Approximately 3 vehicles are affected by this delivery stop that have already been delivered to dealers. Affected vehicles show the campaign as ?Open? when checked either in Warranty Vehicle Inquiry, AIR or ISPA Next and identified with the description: STOP013433 B170418 Delivery Stop: Low Temperature Coolant System. The bulletin will be updated with more information when it becomes available.
Associated Products (15)Associated Documents - September 1, 2018•Document ID: 10150897Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; LANE DEPARTURE
- Mfr Comm. #:
- B661917
- Date Added:
- December 10, 2018
- Manufacturer:
- BMW
Summary?SERVICE ACTION: CHECK AND REPLACE LANE CHANGE WARNING SENSOR. The Lane Change Warning sensor may have been produced with faulty components. This may lead to a failure of the Lane Change Warning system (SWW). Lane Change Warning sensor hardware defect.
Associated Products (8)Associated Documents - September 1, 2018•Document ID: 10149961Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- B111117
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
Summary?ENGINE LEAK DIAGNOSIS ON TURBOCHARGED V8 ENGINES. When diagnosing an engine oil leak or a coolant leak on turbocharged V8 engines it is necessary to use a borescope to identify if the source of the leak is from under the turbochargers. Engine oil or coolant leaking from the bell housing area or the front timing chain cover area may be caused by the turbocharger itself, a turbocharger oil/coolant feed line or turbocharger oil/coolant return line. Do not remove the transmission and do not dissemble the engine before performing this inspection. If necessary, use engine oil leakage detection dye.
Associated Products (114)Associated Documents - May 1, 2018•Document ID: 10143557Service Bulletin/Repair InstructionsSTRUCTURE; STRUCTURE:FRAME AND MEMBERS
- Mfr Comm. #:
- B540907
- Date Added:
- August 6, 2018
- Manufacturer:
- BMW
SummaryRETRACTABLE HARDTOP STATUS REQUEST SUPPLEMENT
Associated Products (9)Associated Documents - September 1, 2017•Document ID: 10146771Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL:CRUISE CONTROL
- Mfr Comm. #:
- B661117
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummaryACC (ACTIVE CRUISE CONTROL): CANNOT DELETE FAULT CODE 022126. ACC fault code 022126 does not delete from ACC control unit fault code memory. May occur in combination with under-voltage fault codes: * BDC 0x80402F - Battery deeply discharged * BE6: 0x801405 - Under-voltage detected Insufficient control unit software.
Associated Products (9)Associated Documents - September 1, 2017•Document ID: 10146769Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- B650414
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary"AIRBAG WARNING LIGHT: ACSM FC 930A60 OR 930A1C SEAT OCCUPANCY DETECTION. According to the customer, the airbag warning light was on, but it may not be on when the vehicle arrives in the workshop. 1. ACSM fault code ""930A60 - Seat occupancy detection, front passenger; malfunction"" is stored. The fault may or may not currently be present. Or 2. ACSM fault code ""930A1C - Front passenger seat occupancy detection transmitting fault (moisture)"" is stored. The fault may or may not currently be present. The front passenger seat occupancy mat consists of a seat occupancy mat with a capacitive sensor system. This means a front passenger is detected by measuring the resistance of the human body. The fault is set when moisture is detected on the mat itself."
Associated Products (154)Associated Documents - September 1, 2017•Document ID: 10146766Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B620717
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummaryINSTRUMENT CLUSTER REMAINS DARK & DOES NOT START UP This Service Information bulletin replaces SI B62 07 17 dated May 2017 What's New: Changed affected production dates & options Procedure wording Changed I-level of software. G12 (7 Series) G30 (5 Series Sedan) Vehicles produced up to 3/1/2017. The instrument cluster (KOMBI) display does not appear when the vehicle is started. Software in the instrument cluster incorrectly initiates the safety mode causing the cluster display to remain dark.
Associated Products (9)Associated Documents - September 1, 2017•Document ID: 10146758Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- B340517
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummaryTICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED. Ticking noise coming from front wheel while cornering without brakes applied; noticeable at low speeds. Vehicle must be moving. Microscopic slippage of contact surface interface between inner brake disc and wheel bearing flange on vehicles equipped with lightweight brake disc.
Associated Products (20)Associated Documents - September 1, 2017•Document ID: 10146756Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- B240516
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary"""TRANSMISSION OVERHEAT WARNING"" MESSAGE IS DISPLAYED. Check Control Message ""Transmission overheating warning"" is displayed. One or more of the following fault codes are stored in the transmission control unit (EGS): * 4209A1 - Temperature sensors: Hot operation 1 with possible adaptation of shift program * 4209A2 - Temperature sensors: Hot operation 2 with torque reduction * 4209A3 - Temperature sensors: Hot operation A faulty transmission oil cooler thermostat."
Associated Products (2)Associated Documents - August 1, 2017•Document ID: 10146684Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B621017
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummaryERRONEOUS SERVICE INCLUSIVE CBS DISPLAY. After pre-delivery check or after instrument cluster exchange, BMW Service Inclusive is displayed although the vehicle does not feature the optional Service Inclusive coverage. Instrument Cluster display error
Associated Products (71)Associated Documents - August 1, 2017•Document ID: 10146683Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B613417
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
Summary"SERVICE ACTION: PROGRAM CONTROL UNITS (GWS). After the engine start-up, gear (Drive or Reverse) cannot be selected. Message ""No drive position change possible"" is displayed in the CC display. Gear can be selected only after vehicle goes through the sleep cycle. Unfavorable GWS gear shifter software"
Associated Products (8)Associated Documents - August 1, 2017•Document ID: 10146679Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- B512717
- Date Added:
- November 5, 2018
- Manufacturer:
- BMW
SummaryREAR WINDOW ROLLER SUNBLIND DOES NOT DEPLOY. Rear roller sunblind will not deploy properly on one or both sides. Connection points to slider or roller are broken.
Associated Products (2)Associated Documents