Audi S5 Service Bulletins
3,313 manufacturer communications on file.
- February 18, 2013•Document ID: 10251023Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 44134220225637
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummarySteering wheel shimmy, vibration and/or oscillation
Associated Products (486)2026 Audi S e-tron GT2025 Audi A32025 Audi A42025 Audi A4 allroad2025 Audi A52025 Audi A62025 Audi A6 allroad2025 Audi A72025 Audi A82025 Audi e-tron2025 Audi e-tron GT2025 Audi e-tron Sportback2025 Audi Q32025 Audi Q42025 Audi Q52025 Audi Q5 e2025 Audi Q72025 Audi Q82025 Audi R82025 Audi RS 3+ 466 moreAssociated Documents - February 18, 2013•Document ID: 10250475Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 4413362022563
- Date Added:
- February 20, 2024
- Manufacturer:
- AUDI
SummarySteering wheel shimmy, vibration and/or oscillation
Associated Products (144)Associated Documents - February 18, 2013•Document ID: 10123987Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- A441336 2022563-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 44 number 13-35 dated January 18, 2013. Customer feels vibration from 55 - 80 mph (88 - 128 km/h) in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not result in any handling concerns or loss of vehicle control.
Associated Products (90)Associated Documents - February 14, 2013•Document ID: 10250423Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 0113692028344
- Date Added:
- February 20, 2024
- Manufacturer:
- AUDI
SummaryIdle speed characteristic during cold start
Associated Products (42)Associated Documents - February 14, 2013•Document ID: 10123993Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A551327 2023967-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 55 number 12-24 dated August 7, 2012. "Low Oil Level" message is on in the DIS or MMI. The hood must be open for at least 30 seconds for a reset of this message to be performed. The message is not reset in the DIS/MMI because the hood has not been recognized as being opened due to an inoperative hood contact switch.
Associated Products (17)Associated Documents - February 14, 2013•Document ID: 10123969Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
- Mfr Comm. #:
- A011369 2028344-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 12-57 dated October 29, 2012. Noises/inconsistent engine operation after cold start during the catalyst heating phase. The customer may interpret this engine roughness as misfiring. To comply with the legal requirements on exhaust gas emissions according to the LEV-1 and LEV-2 standards, a high exhaust gas quality must be ensured. The necessary catalyst only operates at a temperature over 300°C (572°F). To achieve this, the catalyst is heated up. The catalyst heating phase is achieved by a late ignition angles and by introducing additional fresh air to the exhaust valves (secondary air system). Late ignition angles make sure that the exhaust gas from the cylinders has a higher temperature. This exhaust gas includes fuel that is un-burnt, and was deliberately injected into great quantities. The secondary air system adds fresh air to the exhaust gas as it leaves the cylinder and the extra fuel is burnt. As a result, the temperatures of the exhaust gas and of the catalyst increase quickly. The afterburning in the exhaust manifold before the catalyst changes the sound characteristic of the engine. This heating-up of the catalyst, including afterburning, is normal and has no effect on the service life of the engine. During this catalyst heating phase, the engine has increased idle speed, may have increased vibrations, and has a different sound characteristic. Depending on conditions, the time of the catalyst heating phase varies.
Associated Products (43)Associated Documents - February 11, 2013•Document ID: 10063881Service Bulletin/Repair InstructionsPOWER TRAIN:MANUAL TRANSMISSION; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SB-2032971/1
- Date Added:
- May 9, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (4)Associated Documents - February 11, 2013•Document ID: 10250463Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 3713902032971
- Date Added:
- February 20, 2024
- Manufacturer:
- AUDI
SummaryTransmission warning message in cluster. Gearbox in limp mode, Fault P17E100 stored in TCM
Associated Products (4)Associated Documents - February 11, 2013•Document ID: 10123980Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- A371390 2032971-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummaryTransmission warning message appears in instrument cluster. The gearbox is in limp mode until key is cycled. Fault P17E100 (DFCC 9473) is stored in transmission control unit. The DFCC is the 4-6 digit code that is typically listed before the fault code. The fault is very sporadic and usually appears after a cold start. Fault is caused by transmission software that is too sensitive.
Associated Products (4)Associated Documents - February 11, 2013•Document ID: 10051783Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- TSB-37-13-90
- Date Added:
- April 11, 2013
- Manufacturer:
- AUDI
SummaryAUDI: PSS 37 TRANSMISSION WARNING MESSAGE IN CLUSTER. GEARBOX IN LIMP MODE, FAULT P17E100 STORED IN TCM. THE FAULT IS SPORADIC AND USUALLY APPEARS AFTER A COLD START. FAULT IS CAUSED BY TRANSMISSION SOFTWARE THAT IS TOO SENSITIVE. *JS
Associated Products (4)Associated Documents - February 5, 2013•Document ID: 10124000Service Bulletin/Repair InstructionsBACK OVER PREVENTION: CAMERA SYSTEM
- Mfr Comm. #:
- A911374 2024323-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 12-61 dated October 1, 2012. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.
Associated Products (112)Associated Documents - January 23, 2013•Document ID: 10216595Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Instruction
- Date Added:
- August 1, 2022
- Manufacturer:
- AUDI
SummaryInstruction.
Associated Products (24)Associated Documents - January 18, 2013•Document ID: 10068199Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- 2032338/1
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (5)Associated Documents - January 18, 2013•Document ID: 10251018Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 44133520225635
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummarySteering wheel shimmy, vibration and/or oscillation
Associated Products (144)Associated Documents - January 17, 2013•Document ID: 10228346Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
- Mfr Comm. #:
- 01136620314583
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryUnder extreme driving conditions, such as a driving profile of mainly short distance (stop and go) driving high crankcase pressure can lead to the above described DTC codes.
Associated Products (13)Associated Documents - January 17, 2013•Document ID: 10225025Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV); ELECTRICAL SYSTEM
- Mfr Comm. #:
- 01136620314583
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryUnder extreme driving conditions, such as a driving profile of mainly short distance (stop and go) driving high crankcase pressure can lead to the above described DTC codes.
Associated Products (13)Associated Documents - January 17, 2013•Document ID: 10221998Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV); ELECTRICAL SYSTEM
- Mfr Comm. #:
- 01136620314583
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryUnder extreme driving conditions, such as a driving profile of mainly short distance (stop and go) driving high crankcase pressure can lead to the above described DTC codes.
Associated Products (13)Associated Documents - January 16, 2013•Document ID: 10226511Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL); UNKNOWN OR OTHER
- Mfr Comm. #:
- 37138120211933
- Date Added:
- November 21, 2022
- Manufacturer:
- AUDI
SummaryHarsh 2-1 shift with automatic gearbox (0B6) - A4, A5
Associated Products (3)Associated Documents - January 16, 2013•Document ID: 10210661Service Bulletin/Repair InstructionsENGINE; STEERING:GEAR BOX (OTHER THAN RACK AND PINION); POWER TRAIN:MANUAL TRANSMISSION
- Mfr Comm. #:
- 37 13 81 2021193
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryBecause of an unfavorable adjustment between engine and gearbox, vehicle can shudder under certain driving conditions when changing from second to first gear.
Associated Products (3)Associated Documents - January 16, 2013•Document ID: 10066853Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 2021193/3
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (3)Associated Documents