Audi S4 Service Bulletins
2,734 manufacturer communications on file.
- June 21, 2013•Document ID: 10123591Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- A011309 2014753-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 00 number 10-01 dated February 5, 2010. Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. Engine runs rough after cold start. Excessive engine cranking time. Hesitations while driving. Rough engine idle. Reduced engine performance. Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire (example: P0300, P030x) and / or lean fuel system (example: P0171, P0174, P1128, P1130, P1136, P1138) in the engine control module (ECM). Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.
Associated Products (165)Associated Documents - June 20, 2013•Document ID: 10216662Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 134120253033
- Date Added:
- August 1, 2022
- Manufacturer:
- AUDI
SummaryDiscontinuation and mixing of Audi-approved engine coolants.
Associated Products (74)Associated Documents - June 20, 2013•Document ID: 10123587Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A191341 2025303-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 19 number 13-35 dated March 25, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Associated Products (168)Associated Documents - June 19, 2013•Document ID: 10123559Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- A911387 2024683-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 10-68 dated October 26, 2010. The MMI control knob joystick is loose or has fallen off. Only vehicles with navigation and without MMI touch are affected.
Associated Products (49)Associated Documents - June 18, 2013•Document ID: 10228311Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01130620339195
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryOne of the vacuum actuators on intake runner bank 1 or bank 2 is defective.
Associated Products (6)Associated Documents - June 18, 2013•Document ID: 10224990Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 01130620339195
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryOne of the vacuum actuators on intake runner bank 1 or bank 2 is defective.
Associated Products (6)Associated Documents - June 18, 2013•Document ID: 10221963Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01130620339195
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryOne of the vacuum actuators on intake runner bank 1 or bank 2 is defective.
Associated Products (6)Associated Documents - June 18, 2013•Document ID: 10212686Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 35 13 12 2028085
- Date Added:
- May 31, 2022
- Manufacturer:
- AUDI
Summaryleaks from transmission.
Associated Products (11)Associated Documents - June 18, 2013•Document ID: 10210634Service Bulletin/Repair InstructionsSTRUCTURE; EQUIPMENT:MECHANICAL
- Mfr Comm. #:
- 35 13 12 2028085
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryCustomer may report that there is oil leaking under the vehicle. There are a number of possible sources for the leak, including: Leaking from the oil pan seal (Figure 1). Crack in the oil pan (Figure 2). Leak between gearbox housing and intermediate housing (Figure 3).
Associated Products (11)Associated Documents - June 18, 2013•Document ID: 10065640Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 2033919/5
- Date Added:
- May 19, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (6)Associated Documents - June 18, 2013•Document ID: 10123594Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A011306 2033919-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 13-05 dated June 7, 2013. MIL on. DTCs are stored in the engine control module. There may be slight power reduction at high RPMs. One of the vacuum actuators on intake runner bank 1 or bank 2 is defective.
Associated Products (6)Associated Documents - June 18, 2013•Document ID: 10123580Service Bulletin/Repair InstructionsSTEERING:GEAR BOX (OTHER THAN RACK AND PINION)
- Mfr Comm. #:
- A351312 2028085-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 35 number 13-09 dated April 1, 2013. Customer may report that there is oil leaking under the vehicle. Leaking from the oil pan seal. Crack in the oil pan. Leak between gearbox housing and intermediate housing. The source of the leak may be confused with o-ring of drain plug.
Associated Products (11)Associated Documents - June 18, 2013•Document ID: 10052668Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- TSB-01-13-06
- Date Added:
- August 30, 2013
- Manufacturer:
- AUDI
SummaryAUDI: ON SOME VEHICLES, THERE IS A DEFECT PERTAINING TO INTAKE RUNNER BANK 1 OR BANK 2 FROM ONE OF THE VACUUM ACTUATORS. MODELS 2013 A6, A7, S4, S5, S5 CABRIO, AUDI Q7, AUDI Q5. *PE
Associated Products (6)Associated Documents - June 17, 2013•Document ID: 10212704Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 37 13 08 2034163
- Date Added:
- May 31, 2022
- Manufacturer:
- AUDI
SummaryCustomer may report that the transmission does not work correctly.
Associated Products (10)Associated Documents - June 17, 2013•Document ID: 10210651Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- 37 13 08 2034163
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummarySoftware error in the transmission control module. Customer may report that the transmission does not work correctly. ? Shortly after a cold start, the following message appears in the instrument cluster display: ?Gearbox Malfunction! Journey can be continued?. The gearbox is in limp mode until the key is cycled. ? The issue is very sporadic and cannot be reproduced with a test drive. ? DTC P17E1 (Gear positioner 2 mechanical malfunction) with DFCC 9473 is stored in the transmission control module, J743 (address word 02). ? The DFCC is the 4-6 digit code that is typically listed before the fault code (Figure 1).
Associated Products (10)Associated Documents - June 17, 2013•Document ID: 10066843Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 2034163/1
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (10)Associated Documents - June 17, 2013•Document ID: 10251014Service Bulletin/Repair InstructionsSUSPENSION; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC)
- Mfr Comm. #:
- 43131920341621
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummaryReplaced adaptive damping suspension control module cannot be coded
Associated Products (15)Associated Documents - June 17, 2013•Document ID: 10123579Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- A371308 2034163-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummaryCustomer may report that the transmission does not work correctly. Shortly after a cold start, the following message appears in the instrument cluster display: ?Gearbox Malfunction! Journey can be continued?. The gearbox is in limp mode until the key is cycled. The issue is very sporadic and cannot be reproduced with a test drive. DTC P17E1 (Gear positioner 2 mechanical malfunction) with DFCC 9473 is stored in the transmission control module, J743 (address word 02). The DFCC is the 4-6 digit code that is typically listed before the fault code. Software error in the transmission control module.
Associated Products (10)Associated Documents - June 17, 2013•Document ID: 10123577Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- A431319 2034162-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummaryThe adaptive damping suspension control module, J250, cannot be coded via SVM spec/actual after it has been replaced. A new generation of the adaptive damping suspension control module, J250, was placed into production. The new generation control module must be coded and parameterized using an SVM code, which is listed in the attached ETKA Parts Bulletin, 9-119. This parts bulletin can be found in the ETKA Remarks for the part number.
Associated Products (15)Associated Documents - June 17, 2013•Document ID: 10052520Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB-37-13-08
- Date Added:
- August 9, 2013
- Manufacturer:
- AUDI
SummaryAUDI: SOME VEHICLE MAY EXPERIENCE GEARBOX LIMP MODE. THE ISSUE CANNOT BE REPRODUCED ITH A TEST DRIVE, IT IS INTERMITTENT. DTC P17E1 AND DFCC 9473 ARE STORED IN THE TRANSMISSION MODULE. *JS
Associated Products (10)Associated Documents