ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH 16-INCH WHEELS, THE FRONT BRAKE DISCS MAY BREAK UNDER SEVERE DRIVING CONDITIONS. THE BREAKAGE CAN OCCUR IN CONDITIONS WHERE THE VEHICLE IS DRIVEN ON A REGULAR BASIS ON EXTREMELY STEEP PAVED DOWN-SLOPES WHILE CONTINUOUSLY APPLYING THE BRAKES.
ON CERTAIN PASSENGER VEHICLES, UNDER AMBIENT TEMPERATURES BELOW -25 DEGREES CELSIUS, MOISTURE CAN FREEZE IN THE FUEL PRESSURE REGULATOR. AS A RESULT, FUEL SYSTEM PRESSURE MAY INCREASE AT THE TIME OF ENGINE START UP, CAUSING FUEL LOSS AT THE FUEL PIPE/FUEL HOSE CONNECTION.
ON CERTAIN SPORT UTILITY VEHICLES, THE ACCELERATOR CABLE CASING CAP THAT IS ATTACHED TO THE VEHICLE FIREWALL CAN CRACK DUE TO EXTENDED EXPOSURE TO FORCES FROM THE ACCELERATOR CABLE AND INSUFFICIENT LONG-TERM DURABILITY OF THE PLASTIC CASING CAP. IF THE CASING CAP BECOMES CRACKED, MOVEMENT OF THE INNER ACCELERATOR CABLE THROUGH THE CAP CAN CAUSE THE INNER ACCELERATOR CABLE TO BECOME FRAYED.
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. UNDER TEMPERATURES BELOW -25 DEGREES, MOISTURE CAN FREEZE IN THE FUEL PRESSURE REGULATOR. FUEL SYSTEM PRESSURE COULD INCREASE AT THE TIME OF ENGINE START UP, CAUSING FUEL LOSS AT THE FUEL PIPE/FUEL HOSE CONNECTION.
EQUIPMENT DESCRIPTION: STEEL REPLACEMENT WHEELS, PART NO. 4310-665D21-27S, USED FOR SPARE PARTS ON 1999-2001 SUZUKI GRAND VITARA AND 2001 SUZUKI GRAND VITARA XL-7 MULTIPURPOSE PASSENGER VEHICLES. THE AFFECTED WHEELS WERE PRODUCED FROM JULY 30 THROUGH SEPTEMBER 20, 2000. THE THICKNESS OF THE STEEL WHEEL INBOARD OF THE AREA WHERE THE WHEEL RIM IS WELDED TO THE WHEEL DISK IS LESS THAN THE DESIGN SPECIFICATION.
TAKATA RECALL WHEN I TRY TO PUT IN DRIVE I HAVE TO PUT IT IN DRIVE TWO FOR IT TO GO ON DRIVE WHEN I GO TO PUT IT IN PARK IT WILL NOT I HAVE TO MESS WITH IT FOR IT TO GO ON PARK IT EITHER STAYS ON DRIVE OR REVERSE
No injuries · No fire · No crash
THE S FRAME OF MY 2000 SUZUKI GRAND VITARA JLS STARTED VIBRATING AND I TOOK IT TO MIKE ALBERT LEASING AND WHEN THEY PUT IT UP ON THE LIFT THE S FRAME ON THE DRIVERS SIDE WAS COMPLETELY RUSTED OUT AND THE WHEEL WAS DETACHED FROM THE FRAME. THEY CALLED SUZUKI AND THEY SAID THAT THE CORROSION WARRANTY HAD EXPIRED THE END OF FEBRUARY 2010 SO THEY WOULD NOT COVER IT. I AM MORE CONCERNED ABOUT OTHER VEHICLES POSSIBLY HAVING THIS PROBLEM AND OTHER PEOPLE NOT BEING AWARE. THE MECHANICS SAID THAT THIS PART COULD NOT HAVE BEEN TREATED WITH ANY ANTI-CORROSION WHEN THE PART WAS FIRST PUT ON THE VEHICLE. IF I HAD DRIVEN THIS ON THE HIGHWAY I COULD HAVE POSSIBLY BEEN KILLED OR KILLED SOMEONE ELSE. I THINK THIS IS A POSSIBLE ACCIDENT WAITING TO HAPPEN. THE PASSENGER SIDE OF THIS PART WAS AND IS COMPLETELY INTACT. I HAVE THE PART AND IT IS UNBELIEVABLE THAT IT RUSTED ALL THE WAY THROUGH. *TR
No injuries · No fire · No crash
TL*THE CONTACT OWNS A 2000 SUZUKI GRAND VITARA. WHILE DEPRESSING THE BRAKE PEDAL AT AN UNKNOWN SPEED, THE VEHICLE DRIFTED TO THE LEFT. THE DEALER STATED THAT THE SWAY BAR FAILED AND THE CROSS MEMBER WAS EXCESSIVELY RUSTED. THE CONTACT BELIEVED THAT THE FAILURE OCCURRED FROM A LACK OF RUST RESISTANCE MATERIAL ON THE VEHICLE. NO REPAIRS HAVE BEEN MADE DUE TO THE COST. THE MANUFACTURER DID NOT PROVIDE ANY ASSISTANCE. THE CONTACT HAS PICTURES OF THE FAILURE. THE FAILURE MILEAGE WAS 100,000.
No injuries · No fire · No crash
TL*THE CONTACT OWNS A 2000 SUZUKI GRAND VITARA. THE CONTACT HAS HAD HER VEHICLE REPAIRED TWICE FOR TWO RECALLS (NHTSA CAMPAIGN ID NUMBERS 01V146000 AND 04V427000); HOWEVER, THE DEFECT STILL OCCURRED. THE MANUFACTURER AND DEALER STATED THAT NOTHING COULD BE DONE BECAUSE THE RECALL HAD ALREADY BEEN SERVICED. THE CONTACT FIRMLY BELIEVES THAT WHEN SHE TOOK THE VEHICLE THE FIRST TWO TIMES TO HAVE THE RECALL WORK PERFORMED, THE DEALER DID NOT RE-ROUTE THE FUEL DELIVERY HOSE WITH THE IMPROVED CLAMP. THE LAST TIME THE VEHICLE FAILED WAS ON DECEMBER 31, 2007. THE VEHICLE WOULD NOT START AND IT WAS TOWED TO A LOCAL MECHANIC. IT WAS DISCOVERED THAT THE VACUUM HOSE WAS NOT INSTALLED PROPERLY AND THE PSI RELIEF WAS EXTREMELY HIGH. AS A RESULT, THE VEHICLE FLOODED. THE MECHANIC PROPERLY REPAIRED THE DEFECT THAT SHOULD HAVE BEEN INSTALLED DURING THE RECALL REPAIR. THE MECHANIC HAS RECORDS AND DIGITAL PICTURES OF THE IMPROPERLY INSTALLED FUEL HOSE. THE CONTACT ALSO STATED THAT WHEN THE VEHICLE WAS TAKEN IN THE FIRST TWO TIMES FOR THE RECALL REPAIR, IT WAS RECOGNIZED THAT THE FUEL HOSE HAD NOT FAILED AT THAT TIME; HOWEVER,THE RECALL STATED THAT IT COULD POTENTIALLY FAIL. SHE RECEIVED THE FIRST RECALL NOTICE IN DECEMBER OF 2001 AND THE SECOND NOTICE IN OCTOBER OF 2004. THE DEALER REPLACED THE DEFECTIVE PART DURING THE SECOND VISIT. THE MANUFACTURER STATED THAT THE ISSUE WAS NO LONGER THEIR RESPONSIBILITY. THE FAILURE MILEAGES WERE 10,170 (AT THE TIME OF THE FIRST NOTICE) AND 25,325 (AT THE TIME OF THE SECOND NOTICE). THE CURRENT MILEAGE WAS 41,643.
No injuries · No fire · No crash
NOISE COMING FROM TIMING COVER. DEALER INDICATED IT WAS TIMING CHAIN TENSIONER. DEALER STATED THIS WAS A COMMON PROBLEM AND THAT THERE IS A TECHNICAL SERVICE BULLETIN (TSB) CONCERNING THIS ISSUE. TOTAL COST TO REMEDY THE SITUATION WAS APPROX $1600. THE ENGINE WOULD NEED TO BE PULLED FROM VEHICLE, OIL PAN, TIMING COVER REMOVED AND THREE CHAINS, AND RELATED TENSIONERS REPLACED (12.5HRS LABOR). THIS PROBLEM SHOULD BE COVERED EITHER IN TOTAL OR PARTIAL BY MANUFACTURER. *NM
No injuries · No fire · No crash