Mazda Mazda3 Service Bulletins
719 manufacturer communications on file.
- October 6, 2022•Document ID: 10225774Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-012-22
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit accumulation of dried coolant (1) around the water pipe (2). This is caused by a gap between the housing and pipe due to a press fitting during the manufacturing process. The accumulated coolant is solidified and plugs the gap in high temperature environment and the seepage is stopped and does not progress. This is normal and does not require a part replacement, clean off the dried coolant from around the pipe with a wire brush.
Associated Products (8)Associated Documents - October 6, 2022•Document ID: 10225747Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-064-22
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummarySome customers may comlpain about an intermittent Beep sound (popping sound) every 1 ~ 2 minutes while driving. This may be cause by a software error in the navigation SD card.
Associated Products (9)Associated Documents - October 5, 2022•Document ID: 10225781Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 09-028-22a
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit the glass run channel of the front door interfering with the rear door garnish. This is caused by the front door glass run channel not being fixed strongly enough to the door for the following situations where the cycles of door operation may result in interference and lead to damage on the rear door garnish. * When the front door glass is closed, the glass run channel may be forced to move to the B pillar side. * During very hot weather, the glass run channel may expand to the B pillar side. To eliminate this concern, the design of the front door glass run channel has been changed to be fixed stronger to the door.
Associated Products (1)Associated Documents - October 4, 2022•Document ID: 10225739Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SA-063-22
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummaryA New Automatic Transmission Fluid (ATF-A7) is being used for the 2023 Mazda3 and CX-30 with cylinder deactivation
Associated Products (2)Associated Documents - October 4, 2022•Document ID: 10225720Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-004-22f
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (13)Associated Documents - October 3, 2022•Document ID: 10225771Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; POWER TRAIN
- Mfr Comm. #:
- 01-011-22
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may have a "OW ENGINE OIL LEVEL" warning message and a CHECK ENGINE light illuminated in the instrument cluster with DTC P250F:00 stored in memory, and the oil level has actually decreased to near low. * DTC P250F:00 - Engine oil level signal: engine oil level low This is caused by an oil consumption increase due to damage of the valve seals on the exhaust side. To eliminate this concern, the design of these valve seals has been modified.
Associated Products (7)Associated Documents - September 29, 2022•Document ID: 10222563Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-061-22
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummaryThe Blind Spot Monitoring (BSM) system can malfunction with the following symptoms if the rear side radar sensors are installed facing the wrong direction. - BSM system indicates vehicle on the opposite side. - i-ACTIVSENSE indicator ring will not turn green - Rear Cross Traffic Alert (RCTA) does not work - Rear side radar sensor
Associated Products (10)Associated Documents - September 28, 2022•Document ID: 10222572Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-030-22a
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the MyMazda App not communicating to the vehicle properly which may result in the condition monitor information is not refreshed or remote door lock/unlock not functioning. This is caused by a failure in communication between the telematics communication unit and the MyMazda App. To correct this issue, the control software of the telematics communication unit has been modified.
Associated Products (9)Associated Documents - September 23, 2022•Document ID: 10222565Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 07-004-22
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain that after accelerating in hot weather, the A/C blows warm air for a longer time than other models. This is caused by improper control software of the PCM not allowing the A/C compressor to resume properly after acceleration. To eliminate this concern, the control software of the PCM has been modified.
Associated Products (2)Associated Documents - September 8, 2022•Document ID: 10222553Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-004-22e
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (9)Associated Documents - September 5, 2022•Document ID: 10222544Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-025-22a
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may experience infotainment door rattle noise. Follow the repair procedure to help determine the cause.
Associated Products (2)Associated Documents - September 5, 2022•Document ID: 10222542Service Bulletin/Repair InstructionsEQUIPMENT; STRUCTURE
- Mfr Comm. #:
- SA-024-22a
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may experience an infotainment sub-woofer rattle noise. Follow the repair procedure to help determine the cause.
Associated Products (2)Associated Documents - September 1, 2022•Document ID: 10222577Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 16-006-22
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA04_12002 or later).
Associated Products (2)Associated Documents - August 25, 2022•Document ID: 10219229Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-004-22d
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (9)Associated Documents - August 25, 2022•Document ID: 10219228Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-017-22b
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain about any of the following: - Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. - Remote function(s) inoperative. - Engine Start / Stop - Door Lock / Unlock - Lights ON / OFF - MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table below. - If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to the Repair Procedure if there is still an issue. - If the reception is good to strong, proceed to the Repair Procedure.
Associated Products (9)Associated Documents - August 24, 2022•Document ID: 10218766Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 16-001-22c
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_12002 or later).
Associated Products (4)Associated Documents - August 23, 2022•Document ID: 10218777Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- SA-059-22
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers will report that their fuel door was stuck closed and would not open to refuel the vehicle. Follow the repair steps below unless the conditions outlined in TSB 09-019/21 - FUEL-FILLER LID PANEL IS DEFORMED are present.
Associated Products (5)Associated Documents - August 23, 2022•Document ID: 10218737Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-034-22
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain about a fuel gauge that fluctuates to a higher level at a stop on inclines, even after a long drive since it was fully refilled. This is caused by improper control software of the body control module (BCM). To eliminate this concern, the control software of the BCM has been modified.
Associated Products (2)Associated Documents - August 17, 2022•Document ID: 10218775Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- SA-057-22
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit a rattle noise from the front suspension when driving over bumps or on a road with a wavy surface
Associated Products (4)Associated Documents - August 17, 2022•Document ID: 10218769Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 16-005-22
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Ver. 7000C0A-NA06_12012 or later).
Associated Products (4)Associated Documents