Ford Ranger Service Bulletins (2021)
112 manufacturer communications on file.
- December 23, 2021•Document ID: 10205694Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- SSM 50375
- Date Added:
- December 27, 2021
- Manufacturer:
- FORD
SummarySome 2016-2021 Ford and Lincoln vehicles equipped with SYNC 3 may exhibit a condition where the navigation voice prompts are inoperative after a SYNC map update. This may be due to an incomplete installation of the SYNC map software. If possible, using the original USB that installed the update, reperform the update and verify the navigation voice prompts have returned. Multiple reboots are expected when this update is being performed. Verify the Installation Is Complete message displays in the touch screen. If the original USB is not available, go to website https://syncnavigation.com/ford/home or https://syncnavigation.com/lincoln/home to download the files once more for the affected vehicle. For further map update support, reference the FAQ section on these websites.
Associated Products (11)Associated Documents - December 20, 2021•Document ID: 10205526Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 21-2357
- Date Added:
- January 1, 2022
- Manufacturer:
- LINCOLN
SummaryThis article supersedes TSB 21-2315 to increase the labor operation time allowances. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang and 2019-2021 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit a harsh engagement/harsh shift/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to incompatibility of the adaptive calibration to adapt to hardware wear-in over time. To correct the condition, follow the Service Procedure steps to overhaul the main control valve body and/or perform an adaptive learning drive cycle.
Associated Products (4)Associated Documents - December 14, 2021•Document ID: 10205482Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- SSM 50346
- Date Added:
- December 26, 2021
- Manufacturer:
- LINCOLN
SummarySome 2018-2021 Ford and Lincoln vehicles may exhibit inoperative remote features via the Ford Pass/Lincoln Way mobile app, incomplete user authorization, no modem electronic serial number (ESN) displayed or DTCs U2100 and/or B156D in the telematics control unit (TCU). These symptoms may persist even after performing a TCU software update and/or replacement. To correct this condition, start a new session with the latest version of the appropriate diagnostic scan tool and perform a PMI on the TCU. If issues persist, open a hotline assistance request and include the IDS version (if applicable) used to perform the PMI and the Authorization Status PID value in the TCU datalogger. For claiming use causal part 14G229 and applicable labor times in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (9)Associated Documents - December 1, 2021•Document ID: 10205528Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 21-2423
- Date Added:
- January 1, 2022
- Manufacturer:
- FORD
SummarySome 2018-2021 Expedition/Navigator, 2018-2020 F-150/Mustang and 2019-2021 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P163E stored in the powertrain control module (PCM) or transmission control module (TCM) after replacing the main control valve body. This may be due to software incompatibility between the replacement main control valve body solenoid strategy file and the PCM/TCM software. To correct this condition, follow the Service Procedure to obtain a new main control valve body with a new strategy number.
Associated Products (4)Associated Documents - November 23, 2021•Document ID: 10204040Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 50306
- Date Added:
- December 7, 2021
- Manufacturer:
- FORD
SummarySome 2018-2021 EcoSport, Expedition, Navigator; 2019-2021 Ranger; 2020-2021 Escape, Corsair, Explorer, Transit; 2021 Bronco, Bronco Sport, Edge, Nautilus, F-150, Mustang; 2019-2022 Transit Connect; 2020-2022 Aviator, F-Super Duty; and 2022 Maverick vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0496, P0456, P0455, P04F0, and/or P0451. Ford has tested returned EVAP canister purge valves and found them to be fully functional. Prior to replacing the canister purge valve or other EVAP components, perform the following tests using the Ford Diagnosis and Repair System (FDRS) Scan Tool: Full System EVAP Leak Test - FDRS Location: TOOLBOX > PCM > PCM - Evap Emissions System Test and the EVAP Purge Valve Leak Test - FDRS Location: TOOLBOX > PCM > Evap Emission System Toolbox > CPV Check.
Associated Products (23)2022 Ford Bronco Sport2022 Ford Edge2022 Ford Explorer2022 Ford Maverick2022 Ford Transit Connect2022 Lincoln Aviator2022 Lincoln Nautilus2021 Ford Bronco2021 Ford Bronco Sport2021 Ford Ecosport2021 Ford Edge2021 Ford Escape2021 Ford Expedition2021 Ford Explorer2021 Ford F-1502021 Ford Mustang2021 Ford Ranger2021 Ford Transit2021 Ford Transit Connect2021 Lincoln Aviator+ 3 moreAssociated Documents - November 23, 2021•Document ID: 10204039Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- SSM 50305
- Date Added:
- December 7, 2021
- Manufacturer:
- FORD
SummarySome 2019-2021 Ranger vehicles may experience an uneven and/or excessive gap existing between the instrument panel (IP) topper and the center tray/upfitter switch assembly. This may be due to a lack of rigidity in the IP topper not allowing the tray/upfitter switch assembly to latch properly. The following foam block service kits should be used to correct this condition. For vehicles equipped with an IP tray, order service part # KB3Z-2104338-AG, which includes a new IP tray and foam blocks. For vehicles equipped with the upfitter switch assembly, order service part # KB3Z-2104338-A, which only includes the foam blocks. If a new upfitter switch assembly is required, this must be ordered separately. Follow the installation instructions included with each kit to install the foam blocks and repair the vehicle.
Associated Products (1)Associated Documents - November 22, 2021•Document ID: 10203657Service Bulletin/Repair InstructionsEQUIPMENT; COMMUNICATION; ELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 21-2412
- Date Added:
- December 1, 2021
- Manufacturer:
- FORD
SummarySome 2021 Ranger vehicles equipped with four-wheel drive and built on 06-Apr-2021 and through 26-Jul-2021 may experience a controller area network (CAN) communication issue that will set one or more communication fault diagnostic trouble codes (DTC). This may be due to an internal hardware fault within the all terrain control module (ATCM)/mode select switch (MSS).
Associated Products (1)Associated Documents - November 19, 2021•Document ID: 10203656Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- TSB 21-2411
- Date Added:
- December 1, 2021
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 21-2342 to update the Issue, Action, and Service Procedure. Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator and 2021 Bronco Sport vehicles with SYNC 3 may experience various SYNC performance related concerns including but not limited to: Sirius audio not functioning properly after a key cycle with active subscription Presets not responding or indicating properly Intermittent audio echo/robotic voice heard during a Bluetooth phone call Wi-Fi connection message pop-up every key cycle Frozen unresponsive touchscreen Solid blue screen when moving forward at speeds above 16 km/h (10 mph) (2019 vehicles only) Rear parking aid camera remains on the screen at speeds below 16 km/h (10 mph) (2019 vehicles only) Inoperative infotainment applications Poor/no AppLink function Apple CarPlay not launching on connection or a black screen when connected Voice prompts that skip or have short pauses while directions are being provided
Associated Products (11)Associated Documents - November 17, 2021•Document ID: 10204036Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SSM 50296
- Date Added:
- December 7, 2021
- Manufacturer:
- FORD
SummarySome 2021 Ranger and Bronco vehicles built on 15-Jun-2021 and through 15-Aug-2021 may exhibit an illuminated anti-lock brake system (ABS) warning indicator lamp with diagnostic trouble codes (DTC) C003A, C0036, C0037, and/or C0039 stored in the ABS control module. This may be due to damage or movement of the ABS tone ring on the rear axle. Remove the ABS sensor and inspect the rear ABS tone ring for damage or movement from its original position. If movement or damage has occurred, refer to Workshop Manual (WSM), Section 205-02 to complete the service procedure for axle shaft replacement. If no movement has occurred, refer to WSM, Section 206-09 for normal diagnostics.
Associated Products (2)Associated Documents - November 16, 2021•Document ID: 10204034Service Bulletin/Repair InstructionsVISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:CONDENSOR/EVAPORATOR
- Mfr Comm. #:
- SSM 50293
- Date Added:
- December 7, 2021
- Manufacturer:
- FORD
SummarySome 2019-2021 Ranger vehicles built on or before 01-Sep-2021 may experience a lack of air conditioning (A/C) cooling performance condition and/or an A/C compressor engagement concern when using the remote start function (if equipped). This may be due to the software within the front controls interface module (FCIM). To correct the condition, reprogram the FCIM using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 19980 and applicable labor operations in Section 12651D4 of the Service Labor Time Standards (SLTS) Manual. After FCIM programing, check for A/C operation and correct as necessary.
Associated Products (1)Associated Documents - November 9, 2021•Document ID: 10203873Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM:WIRING:POSITION/LIMIT SENSOR/SWITCH
- Mfr Comm. #:
- SSM 50275
- Date Added:
- December 7, 2021
- Manufacturer:
- FORD
SummarySome 2019-2021 Ranger vehicles may experience an uneven and/or excessive gap existing between the instrument panel (IP) topper and the center tray/upfitter switch assembly. This may be due to a lack of rigidity in the IP topper not allowing the tray/upfitter switch assembly to latch properly. The following foam block service kit (SPN: KB3Z-2104338-A) should be used to correct this condition. Follow the installation instructions included with the kit to install the foam blocks into the IP topper and repair the vehicle.
Associated Products (1)Associated Documents - October 15, 2021•Document ID: 10202632Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 50203
- Date Added:
- October 29, 2021
- Manufacturer:
- FORD
SummarySome 2019-2021 Ranger vehicles built on or before 09-Aug-2021 and 2021 Bronco vehicles may experience a loss of power when driving in freezing temperatures with an illuminated malfunction indication lamp (MIL) and/or powertrain malfunction indicator (wrench) lamp with diagnostic trouble codes (DTC) P2111, P2112, and/or P2119. This may be due to water or ice buildup in the intake manifold behind the throttle body. If suspected, remove the throttle body and inspect for the presence of water or ice in the base of the intake manifold. If water or ice is found, replace the intake manifold with part number KB3Z-9424-B and crankcase vent oil separator hose, part number LB5Z-6A664-D. Refer to Workshop Manual (WSM) Sections 303-01 and 303-08. For claiming, use causal part number 9424 and applicable labor times from Section 09 of the Service Labor Times Standard (SLTS) Manual.
Associated Products (2)Associated Documents - October 8, 2021•Document ID: 10202705Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 21-2342
- Date Added:
- November 2, 2021
- Manufacturer:
- FORD
SummarySome 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator and 2021 Bronco Sport vehicles with SYNC 3 may experience various SYNC performance related concerns. To correct the condition, follow the Service Procedure to update the accessory protocol interface module (APIM) software.
Associated Products (11)Associated Documents - October 4, 2021•Document ID: 10202614Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 50171
- Date Added:
- October 29, 2021
- Manufacturer:
- FORD
SummarySome 2019-2021 Edge/Nautilus/Ranger, 2020-2021 Escape/Corsair/Explorer, and 2021 Bronco Sport vehicles equipped with a 2.0L/2.3L EcoBoost may exhibit a lack of power with an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P02AB, P0243, P0299, P1464, P25B3, P25B4, P2AB7, P2AB8 and/or P2AB9. This may be due to an inoperative wastegate actuator, missing wastegate actuator e-clip or non-visible damage to the actuator rod. A lower level service component has been released, K2GZ-9G488-B for Edge/Nautilus/Escape/Corsair/Bronco Sport vehicles and LB5Z-9G488-B for Explorer/Ranger vehicles, for service to replace the actuator, actuator rod and both e-clips. When replacing the wastegate actuator, it is important to replace all parts in the service kit. Turbocharger replacement is not necessary to correct the condition.
Associated Products (7)Associated Documents - September 28, 2021•Document ID: 10201905Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- TSB 21-2315
- Date Added:
- October 5, 2021
- Manufacturer:
- FORD
SummarySome 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang and 2019-2021 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit a harsh engagement/harsh shift/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to incompatibility of the adaptive calibration to adapt to hardware wear-in over time. To correct the condition, follow the Service Procedure steps to overhaul the main control valve body and/or perform an adaptive learning drive cycle.
Associated Products (4)Associated Documents - September 9, 2021•Document ID: 10201620Service Bulletin/Repair InstructionsPOWER TRAIN:MANUAL TRANSMISSION:INTERNAL:DOGS/SYNCHROS; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- TSB 21-2294
- Date Added:
- September 30, 2021
- Manufacturer:
- FORD
SummarySome 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator and 2021 Bronco Sport vehicles with SYNC 3 may experience various SYNC performance related concerns To correct the condition, follow the Service Procedure to update the accessory protocol interface module (APIM) software.
Associated Products (11)Associated Documents - August 27, 2021•Document ID: 10201050Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 50067
- Date Added:
- September 4, 2021
- Manufacturer:
- LINCOLN
SummarySome 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK12 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (12)Associated Documents - August 17, 2021•Document ID: 10201019Service Bulletin/Repair InstructionsPOWER TRAIN:MANUAL TRANSMISSION:INTERNAL:DOGS/SYNCHROS
- Mfr Comm. #:
- SSM 50049
- Date Added:
- September 4, 2021
- Manufacturer:
- FORD
SummarySome 2017-2021 Ford and Lincoln vehicle customers may receive a message in their FordPass or Lincoln Way App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the SYNC Connect or FordPass Connect feature or Lincoln Connect or Embedded Modem Do not replace the TCU or perform any repair to resolve this condition. Refer the owner of the vehicle to Ford Pass Guides or Lincoln Way Concierge Teams to assist in removing the fleet telematics subscription.
Associated Products (11)Associated Documents - August 16, 2021•Document ID: 10201013Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 50039
- Date Added:
- September 4, 2021
- Manufacturer:
- LINCOLN
SummarySome 2016-2021 Ford or Lincoln vehicles equipped with SYNC 3 or SYNC 4 may exhibit a blank screen or other various SYNC symptoms only when the vehicle is in transport mode. This is considered normal due to the power saving features enabled while in transport mode. It is beneficial for battery life to keep the vehicle in transport mode until the vehicle is prepped for sale. To prevent a SYNC system lockup during transport mode deactivation, follow the Workshop Manual (WSM) procedure exactly allowing time for the SYNC system to complete its tasks such as fully booting up or powering down and shutting off before moving to the next step of the procedure. If the vehicle exhibits a blank screen or SYNC symptoms after transport mode deactivation, refer to WSM, Section 415-00 for normal diagnosis. The SYNC version can be confirmed via OASIS.
Associated Products (15)Associated Documents - August 10, 2021•Document ID: 10200743Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 21-2263
- Date Added:
- September 2, 2021
- Manufacturer:
- FORD
SummarySome 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator and 2021 Bronco Sport vehicles with SYNC 3 may experience various SYNC performance related concerns. To correct the condition, follow the Service Procedure.
Associated Products (11)Associated Documents