Audi RS 5 Service Bulletins (2013)
840 manufacturer communications on file.
- March 27, 2013•Document ID: 10123846Service Bulletin/Repair InstructionsSTEERING; STEERING:ELECTRIC POWER ASSIST SYSTEM
- Mfr Comm. #:
- A971335 2033412-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySteering wheel lock does not work. Various warning lights are on. Steering feels stiffer than usual. The engine cannot be switched off. The ignition key cannot be removed. DTC with description "Brake control unit, no signal/communication" is present in several control units. DTC entry in ABS Control unit, J104 (03). One or more may be present. This condition does not result in any drivability concerns. The steering system is fully connected. This condition does not result in any drivability concerns. The steering system is fully connected. The insulation for the ABS wheel speed sensor is damaged in production. Over time, this can lead to corrosion on the wires and restricted functions with the ABS control module. Only the wires in the left bulkhead grommet are affected.
Associated Products (34)Associated Documents - March 25, 2013•Document ID: 10243991Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition29
- Date Added:
- October 16, 2023
- Manufacturer:
- AUDI
SummaryElsaweb Newsletter
Associated Products (27)Associated Documents - March 25, 2013•Document ID: 10123882Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A191335 2025303-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 19 number 11-19 dated February 10, 2011. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Associated Products (168)Associated Documents - March 22, 2013•Document ID: 10066939Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 2033391/1
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (7)Associated Documents - March 22, 2013•Document ID: 10123865Service Bulletin/Repair InstructionsSTEERING:ELECTRIC POWER ASSIST SYSTEM; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A481341 2033391-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummaryCustomer may report that a warning for electromechanical steering is displayed in the instrument cluster. There is no loss of steering control or functionality associated with these warnings. Issues with the hardware and software.
Associated Products (8)Associated Documents - March 20, 2013•Document ID: 10123862Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES:DOORS:LATCH
- Mfr Comm. #:
- A571386 2027368-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 57 number 12-73 dated September 24, 2012. The exterior door handle touch sensors (Advanced key) are inoperative on one or several doors. The key blade can be used mechanically (driver door or trunk) or remote electrically (key remote buttons) to unlock and lock the vehicle.
Associated Products (27)Associated Documents - March 15, 2013•Document ID: 10068736Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL
- Mfr Comm. #:
- 2033313/1
- Date Added:
- June 2, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (7)Associated Documents - March 15, 2013•Document ID: 10123847Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- A961354 2033313-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummaryAdaptive Cruise Control (ACC) does not work. The message "ACC no sensor vision" appears in the cluster. DTCs are logged in the distance regulation control module, J428 (13). The DTC description in the diagnostic log may be blank when using VAS PC depending on the Audi Brand version being used.
Associated Products (7)Associated Documents - March 4, 2013•Document ID: 10068735Service Bulletin/Repair InstructionsLANE DEPARTURE: ASSIST
- Mfr Comm. #:
- 2032225/3
- Date Added:
- June 2, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (8)Associated Documents - March 4, 2013•Document ID: 10123848Service Bulletin/Repair InstructionsLANE DEPARTURE: ASSIST; LANE DEPARTURE
- Mfr Comm. #:
- A961353 2032225-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 96 number 13-50 dated February 6, 2013. The customer complains of the following warning message in the Driver Information Center: "Lane change assistant not available", and the button on the mirror does not stay lit. Audi Side Assist is inoperative. Incorrect component installed at the factory.
Associated Products (4)Associated Documents - February 25, 2013•Document ID: 10250476Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 4413372030275
- Date Added:
- February 20, 2024
- Manufacturer:
- AUDI
SummaryModel Year 2013 Alignment - Repair Authorization
Associated Products (16)Associated Documents - February 25, 2013•Document ID: 10123988Service Bulletin/Repair InstructionsSUSPENSION; STEERING
- Mfr Comm. #:
- A441337 2030275-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 44 number 12-34 dated November 13, 2012. Customers may report the following conditions on vehicles with less than 6000 miles. In some cases these conditions may be noticed at PDI. Vehicle pulls - left or right. Steering wheel not leveled or off-center. If the alignment concern is due to outside influence (e.g. accident), this TSB does not apply.
Associated Products (17)Associated Documents - February 18, 2013•Document ID: 10251023Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 44134220225637
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummarySteering wheel shimmy, vibration and/or oscillation
Associated Products (486)2026 Audi S e-tron GT2025 Audi A32025 Audi A42025 Audi A4 allroad2025 Audi A52025 Audi A62025 Audi A6 allroad2025 Audi A72025 Audi A82025 Audi e-tron2025 Audi e-tron GT2025 Audi e-tron Sportback2025 Audi Q32025 Audi Q42025 Audi Q52025 Audi Q5 e2025 Audi Q72025 Audi Q82025 Audi R82025 Audi RS 3+ 466 moreAssociated Documents - February 18, 2013•Document ID: 10250475Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 4413362022563
- Date Added:
- February 20, 2024
- Manufacturer:
- AUDI
SummarySteering wheel shimmy, vibration and/or oscillation
Associated Products (144)Associated Documents - February 18, 2013•Document ID: 10123987Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- A441336 2022563-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 44 number 13-35 dated January 18, 2013. Customer feels vibration from 55 - 80 mph (88 - 128 km/h) in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not result in any handling concerns or loss of vehicle control.
Associated Products (90)Associated Documents - February 15, 2013•Document ID: 10063899Service Bulletin/Repair InstructionsLANE DEPARTURE: ASSIST
- Mfr Comm. #:
- SB-2031295/4
- Date Added:
- May 9, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (5)Associated Documents - February 15, 2013•Document ID: 10124014Service Bulletin/Repair InstructionsLANE DEPARTURE: ASSIST; EQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- A961351 2031095-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 96 number 13-49 dated February 1, 2013. Audi Side Assist deactivates itself immediately after the engine starts. DTC C1115F2 (Lane change assistance control module 2 Function limitation due to insufficient voltage) is logged in the lane change assistance control module, J769 (3C). The lane change assistance control module, J769 (3C), checks voltage after each engine on cycle. During this check, the voltage can be incorrectly reported which causes the DTC to set.
Associated Products (5)Associated Documents - February 14, 2013•Document ID: 10250423Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 0113692028344
- Date Added:
- February 20, 2024
- Manufacturer:
- AUDI
SummaryIdle speed characteristic during cold start
Associated Products (42)Associated Documents - February 14, 2013•Document ID: 10123969Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
- Mfr Comm. #:
- A011369 2028344-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 12-57 dated October 29, 2012. Noises/inconsistent engine operation after cold start during the catalyst heating phase. The customer may interpret this engine roughness as misfiring. To comply with the legal requirements on exhaust gas emissions according to the LEV-1 and LEV-2 standards, a high exhaust gas quality must be ensured. The necessary catalyst only operates at a temperature over 300°C (572°F). To achieve this, the catalyst is heated up. The catalyst heating phase is achieved by a late ignition angles and by introducing additional fresh air to the exhaust valves (secondary air system). Late ignition angles make sure that the exhaust gas from the cylinders has a higher temperature. This exhaust gas includes fuel that is un-burnt, and was deliberately injected into great quantities. The secondary air system adds fresh air to the exhaust gas as it leaves the cylinder and the extra fuel is burnt. As a result, the temperatures of the exhaust gas and of the catalyst increase quickly. The afterburning in the exhaust manifold before the catalyst changes the sound characteristic of the engine. This heating-up of the catalyst, including afterburning, is normal and has no effect on the service life of the engine. During this catalyst heating phase, the engine has increased idle speed, may have increased vibrations, and has a different sound characteristic. Depending on conditions, the time of the catalyst heating phase varies.
Associated Products (43)Associated Documents - February 6, 2013•Document ID: 10067480Service Bulletin/Repair InstructionsLANE DEPARTURE: ASSIST
- Mfr Comm. #:
- SB-2032225/2
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (8)Associated Documents