Audi Q5 Service Bulletins (2014)
1,411 manufacturer communications on file.
- September 12, 2013•Document ID: 10065651Service Bulletin/Repair InstructionsFUEL SYSTEM, DIESEL
- Mfr Comm. #:
- 2033224/3
- Date Added:
- May 19, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (4)Associated Documents - September 12, 2013•Document ID: 10121319Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- A011328 2033224-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 13-10 dated June 24, 2013. If a model year 2014 Q5 TDI, A6 TDI, A7 TDI, or A8L TDI clean diesel (engine code CPNA or CPNB) requires diagnosis or repair of the engine, diesel fuel delivery, exhaust after-treatment (SCR/AdBlue and emissions) systems, or transmission, a Repair Authorization is necessary prior to repair. This also applies to any messages related to AdBlue shown in the DIS. These procedures are mandatory until further notice. Routine maintenance, PDI, and repair of other systems do not require prior authorization or a TAC ticket. Any repairs related to the engine, diesel fuel delivery, exhaust after-treatment (SCR/AdBlue or emissions) systems, or transmission completed without Repair Authorization via a Technical Assistance Center (TAC) contact will not be reimbursed. In an effort to gain information on the systems listed above, we are asking that you contact TAC before replacing any parts. This will assist us in diagnosing any potential issues.
Associated Products (4)Associated Documents - September 11, 2013•Document ID: 10121367Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A911304 2013422-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 12-49 dated July 31, 2012. The Bluetooth® telephone cannot be connected to the vehicle?s Infotainment system. Certain restrictions are present when a Bluetooth device is connected to the vehicle. The restrictions vary depending on the vehicle system present.
Associated Products (117)Associated Documents - September 11, 2013•Document ID: 10121362Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING
- Mfr Comm. #:
- A801305 2033806-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 80 number 13-04 dated August 9, 2013. Malfunction Indicator Lamp is on. Climate system heating performance is insufficient. Coolant level warning is on. Engine temperature is elevated. ?Limp Home? mode is active. Faults are stored in the transmission control module. Coolant loss is found from one or more control valves: N82, N509, or N488. Coolant may have migrated into the wiring harness through the connector and into various control units. Climate system heating performance is insufficient due to coolant loss, or due to a faulty N82 control valve. Inspection of the coolant control valves N82, N509, or N488 reveals the presence of coolant inside the electrical connector as shown in the illustration. The connectors, wiring harness, and/or connected control units may have been damaged from exposure to coolant.
Associated Products (24)Associated Documents - September 10, 2013•Document ID: 10121363Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS
- Mfr Comm. #:
- A871345 2024644-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 87 number 13-41 dated May 30, 2013. Moisture in the driver or front passenger foot well. Due to a faulty and/or incorrectly installed condensation drain hose, condensation from the evaporator could enter the front foot well areas through a gap between the body and the sealing surface of the drain hose.
Associated Products (26)Associated Documents - September 5, 2013•Document ID: 10121344Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES; ELECTRICAL SYSTEM
- Mfr Comm. #:
- A571393 2035173-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummaryCustomer may report that the automatic door lock function cannot be deactivated. The ?Lock when driving? (Autolock) configuration setting has been discontinued starting in some model year 2013 vehicles, and it is no longer available in the Car >> Vehicle Settings category in the MMI. The vehicle can still be unlocked while it is being driven, at any time, with the central locking switch in the door.
Associated Products (3)Associated Documents - September 5, 2013•Document ID: 10121324Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A101310 2018288-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
Associated Products (154)Associated Documents - September 3, 2013•Document ID: 10251021Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 44134020277795
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummarySteering rack control unit cannot be coded
Associated Products (12)Associated Documents - September 3, 2013•Document ID: 10121336Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- A441340 2027779-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 48 number 12-33 dated October 22, 2012. After replacing the electromechanical steering with the control unit J500, the unit cannot be coded via SVM spec/actual. All new replacement power steering control units (J500) must be coded and parameterized using online SVM spec/actual or an SVM code. If the SVM spec/actual returns a response of ?Check Hardware?, then the SVM code is required to code and parameterize the new replacement control unit. The SVM code can be found in Parts Bulletin 9-97, which is available online through ETKA.
Associated Products (14)Associated Documents - September 1, 2013•Document ID: 10073843Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- AUDI Q5/SQ5
- Date Added:
- June 22, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - September 1, 2013•Document ID: 10243902Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- ReferenceC
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryQuick Reference Specification Book
Associated Products (2)Associated Documents - August 30, 2013•Document ID: 10124638Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- A911302 2018187-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 11-20 dated October 21, 2011. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
Associated Products (125)Associated Documents - August 26, 2013•Document ID: 10124631Service Bulletin/Repair InstructionsLANE DEPARTURE: ASSIST; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A961372 2035047-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryAudi Lane Change Assistant deactivates or is sporadically inoperative when the vehicle is driven in slow-moving stop-and-go traffic, especially on roads with multiple lanes. The message "Audi side assist unavailable: Sensors blocked" appears in the driver information system. The system is able to be activated approximately ten minutes after the traffic condition is removed, or after an ignition cycle. Audi Lane Change Assistant can be activated without issue. No obstructions can be found. DTCs are stored in the Lane Change Assistance control module. The control module mounting brackets are securely fastened to the lower rear bumper, and no damage is found to the rear bumper area, on the inside or outside. (If any damage is found, it is not covered under warranty.) The control module mounting brackets are not broken or loose. If a loose bracket is found, repair as necessary using the Elsa Repair Manual. Submit a separate warranty claim, as this TSB does not cover this repair. The software of the Lane Change Assistance control module can deactivate the Audi Side Assist system in certain normal driving conditions because the nature of these driving conditions make it difficult for the Audi Side Assist system to track vehicles.
Associated Products (8)Associated Documents - August 26, 2013•Document ID: 10124592Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- Update Bulletin
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryOn Audi vehicles with a 3.0L TFSI engine produced during a certain period, it is possible that the membrane on the vacuum actuator for the intake manifold flaps may tear. As a result, the intake manifold flaps do not function and the engine indicator light turns on. This Update is in effect until removed. On Audi vehicles with a 3.0L TFSI engine produced during a certain period, it is possible that the membrane on the vacuum actuator for the intake manifold flaps may tear. As a result, the intake manifold flaps do not function and the engine indicator light turns on. This Update is in effect until removed. Procedure is valid only for vehicles that show the 24Z6 code in the ElsaWeb Campaign/Action Information screen on the day of repair. Vehicle must be within the New Vehicle Limited Warranty. Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable vehicles in dealer inventory prior to sale. On Audi vehicles with a 3.0L TFSI engine produced during a certain period, it is possible that the membrane on the vacuum actuator for the intake manifold flaps may tear. As a result, the intake manifold flaps do not function and the engine indicator light turns on.
Associated Products (14)Associated Documents - August 22, 2013•Document ID: 10124590Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- Update Bulletin
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryWhen making minor steering movements while driving in a straight line in Audi vehicles with electromechanical power steering manufactured within a specific period, the customer may occasionally perceive slight irregularities with the assistance provided by the power steering. This phenomenon mainly occurs when the temperature is around the freezing point. This is a comfort-related issue; therefore no warning symbol lights up. This Update is in effect until removed. Procedure is valid only for vehicles that show the 48K8 code in the ElsaWeb Campaign/Action Information screen on the day of repair. Vehicle must be within the New Vehicle Limited Warranty. Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable vehicles in dealer inventory prior to sale. When making minor steering movements while driving in a straight line in Audi vehicles with electromechanical power steering manufactured within a specific period, the customer may occasionally perceive slight irregularities with the assistance provided by the power steering. This phenomenon mainly occurs when the temperature is around the freezing point. This is a comfort-related issue; therefore no warning symbol lights up.
Associated Products (15)Associated Documents - August 22, 2013•Document ID: 10053913Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; STEERING:ELECTRIC POWER ASSIST SYSTEM
- Mfr Comm. #:
- TSB-48-K-8
- Date Added:
- December 4, 2013
- Manufacturer:
- AUDI
SummaryAUDI: UPDATED INFORMATION ON POWER STEERING CONTROL UNIT SOFTWARE, IN SOME VEHICLES, WITH ELECTROMECHANICAL POWER STEERING, HAVING SLIGHT IRREGULARITIES, MANUFACTURED A SPECIFIC PERIOD, MAINLY OCCURS WHEN TEMPERATURE IS AT FREEZING POINT. MODEL 2012-2014 A4, A5, Q5, A6, A7. *PE
Associated Products (15)Associated Documents - August 21, 2013•Document ID: 10124612Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- Dealer Letter -
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryThis communication is to inform you of upcoming Update 48K8. When making minor steering movements while driving in a straight line in Audi vehicles with electromechanical power steering manufactured within a specific period, the customer may occasionally perceive slight irregularities with the assistance provided by the power steering. This phenomenon mainly occurs when the temperature is around the freezing point. This is a comfort-related issue; therefore no warning symbol lights up. Update the power steering control unit to the latest software.
Associated Products (15)Associated Documents - August 16, 2013•Document ID: 10124657Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- A461356 2034181-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 46 number 13-53 dated August 7, 2013. Customer may report hearing brake noise from front or rear brakes. Customers may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking.
Associated Products (22)Associated Documents - August 14, 2013•Document ID: 10124645Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD
- Mfr Comm. #:
- A641329 2020552-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryWindshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
Associated Products (144)Associated Documents - August 14, 2013•Document ID: 10124609Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- Dealer Letter-Up
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryThis communication is to inform you of a revision to Update 24Z6. The revision is in regards to the manifold actuator.
Associated Products (14)Associated Documents