Audi A7 Service Bulletins (2013)
1,450 manufacturer communications on file.
- May 28, 2014•Document ID: 10228295Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 00146320335762
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryAlthough the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
Associated Products (189)Associated Documents - May 28, 2014•Document ID: 10226529Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 37143020036586
- Date Added:
- November 21, 2022
- Manufacturer:
- AUDI
SummaryVehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
Associated Products (270)Associated Documents - May 28, 2014•Document ID: 10224974Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION: OIL COOLER
- Mfr Comm. #:
- 00146320335762
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryAlthough the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
Associated Products (53)Associated Documents - May 28, 2014•Document ID: 10221947Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 00146320335762
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryAlthough the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
Associated Products (189)Associated Documents - May 28, 2014•Document ID: 10210679Service Bulletin/Repair InstructionsELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE:SOFTWARE; POWER TRAIN
- Mfr Comm. #:
- 37 14 30 2003658
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryThis condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off).
Associated Products (270)Associated Documents - May 28, 2014•Document ID: 10122465Service Bulletin/Repair InstructionsPOWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE)
- Mfr Comm. #:
- A371430 2003658-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 37 number 13-07 dated May 29, 2013. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off). No DTCs are stored. This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition.
Associated Products (201)Associated Documents - May 28, 2014•Document ID: 10122452Service Bulletin/Repair InstructionsENGINE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- A001463 2033576-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 00 number 13-49 dated May 14, 2013. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
Associated Products (126)Associated Documents - May 26, 2014•Document ID: 10231139Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition87
- Date Added:
- February 6, 2023
- Manufacturer:
- AUDI
SummaryTechnical bulletins and updates
Associated Products (119)Associated Documents - May 22, 2014•Document ID: 10226528Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 37142920290279
- Date Added:
- November 21, 2022
- Manufacturer:
- AUDI
SummaryTransmission warning message in cluster.
Associated Products (16)Associated Documents - May 22, 2014•Document ID: 10210678Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 37 14 29 2029027
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryCustomer may report transmission warning light is illuminated. In some cases, the vehicle will not move after being started and placed into gear. After key cycle, the vehicle drives without restriction. The DTCs are stored due to an issue with the transmission control module software.
Associated Products (17)Associated Documents - May 22, 2014•Document ID: 10065997Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 2029027/9
- Date Added:
- May 19, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (11)Associated Documents - May 22, 2014•Document ID: 10122464Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A371429 2029027-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 37 number 13-17 dated September 11, 2013. Customer may report transmission warning light is illuminated. In some cases, the vehicle will not move after being started and placed into gear. After key cycle, the vehicle drives without restriction. DTCs are stored in the transmission control module (TCM). If DFCCs do not match exactly, this TSB does not apply. The DTCs are stored due to an issue with the transmission control module software.
Associated Products (17)Associated Documents - May 21, 2014•Document ID: 10216614Service Bulletin/Repair InstructionsBACK OVER PREVENTION:SOFTWARE
- Mfr Comm. #:
- 147720305809
- Date Added:
- August 1, 2022
- Manufacturer:
- AUDI
SummaryThe remote key being used is transmitting incomplete immobilizer information to the vehicle, resulting in the condition. Improved software for the comfort system central control module, J393 (address word 46) in production. Service software update will follow at a later date (to be determined).
Associated Products (9)Associated Documents - May 21, 2014•Document ID: 10065429Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 2030580/9
- Date Added:
- May 19, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (9)Associated Documents - May 21, 2014•Document ID: 10122454Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:STARTER ASSEMBLY
- Mfr Comm. #:
- A011477 2030580-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 14-51 dated January 3, 2014. The customer complains that the vehicle sporadically cannot be started. The yellow gearbox warning light may be illuminated. DTCs may be present. The remote key being used is transmitting incomplete immobilizer information to the vehicle, resulting in the condition.
Associated Products (9)Associated Documents - May 14, 2014•Document ID: 10250971Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 441450202256310
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummarySteering wheel shimmy, vibration, and/or oscillation
Associated Products (128)Associated Documents - May 14, 2014•Document ID: 10122467Service Bulletin/Repair InstructionsSTEERING: STEERING WHEEL/HANDLE BAR; SUSPENSION
- Mfr Comm. #:
- A441450 2022563-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 44 number 14-49 dated April 17, 2014. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. The customer feels the vibration while driving at highway speeds from 55 ? 80 mph (88 ? 128 km/h). This bulletin is not applicable if this vehicle has a Repair Authorization on this topic. If an applicable Repair Authorization is not followed, the claim will not be paid. The vibrations felt by the customer could be a result of the harmonic vibrations caused by the radial force variation (RFV) of the tires or an imbalance of the wheel and tire assembly.
Associated Products (83)Associated Documents - May 13, 2014•Document ID: 10249085Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- Update91i8
- Date Added:
- January 22, 2024
- Manufacturer:
- AUDI
SummaryGoogle Maps Street View (NVLW))
Associated Products (264)Associated Documents - May 2, 2014•Document ID: 10122472Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A641433 2029714-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 64 number 12-22 dated July 5, 2012. After one or both of the front door control units (J386/J387) is replaced, one or both of the rear door control units (J3888/J389) cannot be coded or parameterized via an SVM specified vs. actual comparison (spec/actual). The parameter data in the software coding container has changed for the front and rear door control units. As a result, an SVM code is required to update the parameter data for any replacement control unit. Simply running an SVM spec/actual will not code nor update the parameter data in the new replacement control unit. A hardware change suggestion will be provided when an SVM spec/actual is executed. An additional hardware replacement is not required.
Associated Products (50)Associated Documents - May 1, 2014•Document ID: 10226521Service Bulletin/Repair InstructionsLANE DEPARTURE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- 371422202898511
- Date Added:
- November 21, 2022
- Manufacturer:
- AUDI
SummaryTransmission warning message in cluster (P074100 stored in TCM)
Associated Products (24)Associated Documents