2025 Jeep Wrangler C2206 DTC After Speedometer Correction
A technical service bulletin (TSB S2523000058) addresses the C2206 Diagnostic Trouble Code (DTC) in 2025 Jeep Wrangler vehicles after an Aftermarket Mopar Vehicle Protection (MVP) Speedometer Correction Plan is added. Owners are advised against further repairs.
David Chen2025 Jeep Wrangler
Owners of the 2025 Jeep Wrangler may encounter a Diagnostic Trouble Code (DTC) C2206, specifically after an Aftermarket Mopar Vehicle Protection (MVP) Speedometer Correction Plan has been installed. This issue is highlighted in Technical Service Bulletin (TSB) S2523000058, an advisory communication from the manufacturer.
This TSB, released in June 2025, serves as an early notification regarding a known concern. It provides crucial guidance for technicians and owners on how to address the 2025 Jeep Wrangler C2206 DTC until a permanent solution is developed and released.
Understanding the C2206 DTC Issue
Symptoms
The primary symptom for affected 2025 Jeep Wrangler vehicles is the setting of a C2206 Diagnostic Trouble Code (DTC). This code typically indicates a fault within a specific vehicle system and may trigger a warning light on the instrument cluster.
Fault Code Details
| Code | Description |
|---|---|
| C2206 | Vehicle Configuration Mismatch |
Trigger Conditions and Technical Background
The C2206 DTC is specifically observed in vehicles equipped with the sales code XMB – Central ADAS Decision Module (CADM). The code appears when a
Frequently Asked Questions
- What does DTC C2206 mean for my 2025 Jeep Wrangler?
- DTC C2206, or "Vehicle Configuration Mismatch," indicates an incompatibility or incorrect setting within your vehicle's systems. In this specific case for the 2025 Jeep Wrangler, it is linked to the Central ADAS Decision Module (CADM) after an Aftermarket Mopar Vehicle Protection (MVP) Speedometer Correction Plan is added.
- Why is my 2025 Jeep Wrangler getting a C2206 DTC after a speedometer correction?
- According to TSB S2523000058, the issue arises because the Aftermarket Mopar Vehicle Protection (MVP) Speedometer Correction Plan creates a configuration mismatch with the vehicle's Central ADAS Decision Module (CADM), which uses sales code XMB. This conflict triggers the C2206 DTC.
- What should I do if my 2025 Jeep Wrangler has DTC C2206 after a speedometer correction?
- The manufacturer advises against performing any additional repairs at this time. Instead, you should contact Mopar Vehicle Protection (MVP) to have the speedometer correction plan removed until a proper resolution is in place. You can also select 'Get Notified' on the Service Library to be informed when a fix becomes available for the 2025 Jeep Wrangler C2206 DTC.
- Will this issue with the 2025 Jeep Wrangler C2206 DTC be resolved?
- Yes, engineering is aware of the concern, and a resolution is anticipated. The TSB indicates that owners should contact MVP to remove the plan and await notification when a permanent fix for the C2206 Vehicle Configuration Mismatch is available.
Related Articles
2025 Jeep Wrangler Health Check: Recalls and Bulletins
The 2025 Jeep Wrangler faces a single recall related to its Tire Pressure Monitoring System (TPMS) warning light, alongside a series of manufacturer service bulletins addressing issues from engine misfires and transmission warnings to driver assist system faults and electrical glitches. This…
2024-2026 Jeep/RAM/Dodge Cylinder Head Cover Bolt Quality Check
A manufacturer communication (ID 111406) addresses a quality inspection request for cylinder head cover bolts, part number 04893799AJ, for various 2024-2026 Jeep, RAM, and Dodge models. Dealers are instructed to identify and return suspect bolts with a chamfered flange by April 29, 2026.
2025-2026 Jeep/Ram Radio Stays On After Ignition Off
If your 2025-2026 Jeep, Ram, or Chrysler vehicle's radio stays on after you turn off the ignition or open the door, it's likely due to a configurable 'Radio Off Delay' feature, not a defect. This TSB (S268A000011) provides steps to adjust the setting.
2025-2026 Jeep Wrangler Seat EZ Entry Inoperable TSB
This manufacturer communication, TSB S2623000013, details diagnostic and repair steps for 2025-2026 Jeep Wrangler models experiencing an inoperable EZ Entry seat or one that doesn't slide forward. It focuses on inspecting and potentially replacing the EZ Entry cable (68715023AA).
2025 Jeep Wrangler Heated Steering Wheel Not Working TSB
Owners of 2025 Jeep Wrangler vehicles may experience their heated steering wheel not getting hot enough or not working at all. Technical Service Bulletin (TSB) 08-122-26 provides a software update for the Comfort Seat Wheel Module (CSWM) to resolve this issue.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.